Question about 2008 Ford Expedition

Open Question

Clicking noise in right rear - expedition rear air blend door actuator

How do I stop clicking

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 37 Answers

SOURCE: clicking/popping noise from rear a/c-heater unit

It's the temp blend door actuator.

Posted on Apr 14, 2009

emissionwiz
  • 75005 Answers

SOURCE: blend door actuator on a 99 expedition

In order to replace the blend door actuator motr dribe u must remove the entire dash assembly, I strongly suggest buy a factory service manual for this job which takes around 12 hours to complete, also take pictures of connections u are not sure of before u disconnect them./

Posted on May 19, 2009

moparownr
  • 667 Answers

SOURCE: 2004 Ford Expedition XLT, front blend door actuator

Hope I was avle to help, glad you up and going.

Posted on May 27, 2009

  • 9 Answers

SOURCE: NO heat in front of 2001 windstar van. Thumping

Blend air door may be stuck. I removed a pencil from a heater box before. It had fallen from the dash, down through the defrost vents and jamed the door.

Posted on Nov 13, 2009

  • 5 Answers

SOURCE: how to replace blend door actuator in a ford

I recently did mine, I hear you can do it without taking the entire dash apart but I had no luck with it myself. I have to get ready for work but, on mine it was located down and to the left of the radio. its a white box...are you hearing a clicking noise or something? I had to roll the entire dash back and it was still a major pain getting it out.

Posted on Dec 07, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What is the cause of no heat coming from the rear top blower? There is also a clicking noise from the rear of the vehicle. I have a 2006 Ford Explorer. How can I fix these symptoms?


mode door actuator inrear Hvac . The clicking is the actuator slipping it's gear's . Plastic gears break ,wear out etc....
You have to take right rear trim panel out to replace it >
2003 2006 Ford Expedition Rear HVAC Temperature Blend Actuator Clicking... Your having problem with the mode door actuator ,not temp blend door.

Jun 30, 2017 | Ford Cars & Trucks

1 Answer

Have a clicking noise in the right rear panel of my 2006 Envoy xl. Have had a new battery installed and a new alternator. The noise stays on all the time when the key is turned on . HELP!


That is a electrically controlled actuator for the rear HVAC - heating ventillation an air conditioning system . Mode door or temp. door actuator . They are plastic an the gears wear an strip .
Loud clicking sound from rear of 2003 Trailblazer EXT
2004 Chevy Suburban Rear Air Temperature Actuator Blend Door HVAC You would have to do the same thing to replace yours .

Jun 06, 2017 | Cars & Trucks

1 Answer

Clicking noise right rear by third seat 2004 eddie bauer expedition when rear heat and air on or car on


I had the same problem with 2004 Expedition. Changed the actuator for the blend door. This is the one that determines the air temp (cold ---- hot). Purchased Actuator from Advance Auto Parts and installed. I was able to install this pulling out on panel, but it's tight and you will have limited movement and sight. It started clicking again in about a year. After reading other solutions, I realize my Blend Door may be hanging at times. It currently only clicks on coldest setting. If it's moved off of cold a little the clicking will stop. I have also noticed if the setting is not moved in just the spot and you use other electrical current such as windows or brakes it will click because of voltage change and will need adjusting more. I have to adjust this setting in the front if set on front controls as well as the rear if set for rear control. It works fine on Warm or Hot setting. I plan to check door binding when I have time. Good Luck

Nov 22, 2012 | 2004 Ford Expedition

1 Answer

My 2005 Ford Expedition is blowing hot air from the front vents and suddenly the rear vents stopped working at all but I can sometimes hear a noise on the rear part of the truck ,may someone please tell me...


to me this sounds like a blend door problem. this is in the heater box, first you need to pinpoint the noise. there is 2 heater boxes on front and a rear both have blend doors. being you hear a noise, I suspect either door is jambed by forign object or broken, but still could be a problem with the actuator for the door. as for the rear not blowing?,check the position of the front blower switch, one position will disable rear function. honestly this
should be done by an experianced technican, I was 20yrs ford.

Apr 02, 2012 | 2005 Ford Expedition

1 Answer

I have a 2003 Ford expedition Eddie bauer. Seat in third row stuck down and there's a constant clicking noise in right rear panel. I know my cuz took motor out. Can I bring seat back up without...


The clicking noise sounds like your blend door actuator. Try turning your AC/Heat OFF and see if it stops (give it a minute to travel in position). The actuator is a common failure in the Expys, costs about $50 to replace. You will have to remove the right rear panel to replace it - a few screws and a couple of bolts (where the seat belt attaches).
As for the seat not working, not sure about this. I would make sure the wiring harness is hooked up and the fuse is not blown. See your owners manual for fuse location.

May 21, 2011 | 2003 Ford Expedition

2 Answers

My husband needs to know if there is a fuse that could fail and make the rear air conditioner blow hot air.


no....This is the rear A/C & heater actuator blend door malf/broken. This is very common on expeditions and I encountered the same issue in my 2006 expy. This door switches from hot to cold vents, once stuck only hot air will blow. Also, is there any thumping or tapping noises from the right rear panel (this is where the rear a/c unit is)???

May 05, 2010 | 2003 Ford Expedition

1 Answer

My Air Condition is only blowing hot air in the front, but cold in the rear. Could anyone give me a start in correcting this problem? Thanks


possible blend door actuator faulty, or a faulty blend door. This door switches from hot to cold vents. On expeditions equipped with rear AC front and rear AC have seperate actuators. Hopefully this helps!!

Mar 31, 2010 | 2001 Ford Expedition

1 Answer

When I turn on the rear heater or air conditioner, I believe it is the actuator makes a clicking sound. I can see the clicking sound is the plastic sprocket skipping.


Easy,your rear blend door actuator is bad. buy one and install it! no problem. it's right on rear plenum,just pull trim off and panel out and sneak it in there.

Jul 18, 2009 | 2004 Ford Expedition

Not finding what you are looking for?
2008 Ford Expedition Logo

Related Topics:

25 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

74945 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

fordexpert

Level 3 Expert

5467 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...