Question about Cars & Trucks
Posted by Anonymous on
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
do you have a hole in the piston or gasket? If in the piston it is most likely from coolant or water. If water, could be a cracked head, or being sucked in through the intake and building up in the 6th cyl. I have a lexus that had a hole in the side of the motor and noon could figure out why. I pulled the head and found water... Put new block in and egr codes came up. Pulled EGR and found it was sucking in water, due to an exhaust leak that was allowing condensation to build and would not blow out once in the egr tube. If you face the same problem (hole in block) I am going to say too much compression. Could be from head gasket not being torqued properly and leaking cooland, cracked head, or wrong spark plugs-and worst case scenario which I have yet to witness, bad spark plug gap. Not likely on your car, i would think.
Posted on Mar 29, 2010
SOURCE: would like a diagram of
Below is a picture of the SR engine with all the timing marks aligned and circle. I s this what you needed?If you need to make the picture full screen copy it to the picture files of your PC and use that to view full screen.
Posted on Jan 12, 2011
Tips for a great answer:
Jun 20, 2018 | Nissan Cars & Trucks
Apr 16, 2018 | Nissan Cars & Trucks
Feb 28, 2017 | Nissan Cars & Trucks
Feb 24, 2016 | Isuzu Cars & Trucks
Jan 13, 2016 | Nissan Cars & Trucks
Jul 17, 2018 | Cars & Trucks
714 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: