Question about 2001 Daewoo Lanos

1 Answer

Intermittent misfiring and stalling

Driving normally, apply brake and engine misfires, then stalls and check engine light comes on. fault is intermittent

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    New Friend:

    An expert that has 1 follower.

  • Expert
  • 76 Answers

This sounds like a definate problem with vacuum check valve on your brake booster or the hose going to booster....that should solve your prob! good luck.......ps----------cheap part...quick fix!

Posted on May 22, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have an 05 Suzuki Forenza that has a flashing check engine light. This started on Tuesday. Had the codes looked up. Car is driving shaky and dash lights are blinking. Any ideas?


fix the anti freeze leak --before you blow a head gasket

what your codes mean

Check Engine Light On, P0300 Random Misfire Code. A random misfire means your engine is misfiring, but that the problem is not isolated to one or two cylinders. It is jumping around in a random way from one cylinder to another. A random misfire code usually means the air/fuel mixture is running lean.

What the P0700 code means. P0700 is set when the PCM detects a malfunction in the transmission control system. This malfunction causes the vehicle to set a Check Engine Light and trigger a failsafe mode. Once the failsafe mode is set it will remain until the fault is repaired or normal operation is detected.

PO133 Oxygen Sensor Circuit Slow Response (Bank1, Sensor1)

Nov 25, 2016 | Suzuki Cars & Trucks

1 Answer

98 dodge ram 1500 5.9L 2wd. Truck runs really rough, stalls, then won't start. No check engine light now. Had misfire codes, did tune up, now it still stalls and no check engine light.


What is the O2 sensor reading? If it runs rough check the engine compression, run an injector flow test and clean and replace as necessary. Check the EGR for leakage. Drive it and see if the misfire codes return, I think they will.

Sep 08, 2016 | Dodge Ram 1500 Cars & Trucks

1 Answer

98 dodge ram 1500 5.9L 2wd got misfire codes. Changed cap, rotor, wires, plugs, manifold gasket, TPS, truck still stalls when driving and won't start. Check engine light doesn't come on anymore. Help?


Retest it and post all the codes received, also do a engine running fault code test (requires a full function scan tool). Check for engine vacuum leaks and check the EGR valve for leaking.

Sep 07, 2016 | Dodge Ram 1500 Cars & Trucks

2 Answers

What makes my 2007 Isuzu turn off when I come to a stop


if it is petrol and you have your foot on the brake do a simple test first of stopping with the hand brake and if it keeps idling the replace the brake booster
next is to run the fault codes

Jul 09, 2015 | Isuzu Cars & Trucks

1 Answer

Stalling troubleshooting


run fault codes to check for electronic problems (TCM). If this problem only happens when the foot brakes are applied check for brake booster vacuum problem. Remove vacuum line and blank off and apply the brakes to see if the engine stalls at idle.

Jul 22, 2014 | Ford F-150 Cars & Trucks

1 Answer

Stalling when turn back on


all stalls end in CEL check engine light on. that is normal
but CEL glow. when engine running , means you had a failure, and it stored DTC error codes, so scan it.
lots of causes. huge list.
get a tune up , tops list.

SCAN it to be sure all sensors work. running.
all fuses in car good.
by stalls , i assume the engine stalls and engine RPM is 0 RPM.
the stall cause the whole dash to light up, all the warning lamps come
on (self test) oil , charge , CEL. come on.
what is important is the stall and the cause.

i will tell you the 3 ways.
lost electrical power to engine EFI system (seems not)
bad engine, (lost compression hot)?
bad spark , spark died.?
bad fueling, lost all fueling (starves and stalls or floods and misfires horribly and stalls (black spark plug tips are big time clue)

if non eof the rings a bell.?
get the car serviced.

this car is newer nicer car, you (we) can scan and drive and log data.
allowing faster easy diagnosis.

Mar 12, 2014 | 2004 Jeep Liberty

2 Answers

Engine switching off when you engage into drive, break, or switch on lights


engine stalls with any added load, even DRIVE ,
you have engine issues, if it stalls, for any reason.

stalls are complex. (like juggling bowling pins.)
the ECU tries very hard to stop all stalls, and failed
that means the engine power is very very weak.
(misfiring or fuel starvation)

ever give it a full 60k mile tune up this decade? bingo?
(we have a list of 50 causes) forget that
we have 5 tests. that work. (and good fresh fuel)

ill list just 1
key on, is CEL lamp (engine check light) is on?
you start engine, does the lamp go out.? same lamp.
i'd bet not. bingo? that means scan it , with any scan tool.
then post the DTC errors.

in USA some auto stores let you barrow one, Axxx-zoned.

ok 2: check all fuses. really that is #1,....
1: all fuses, both boxes. checked good.
3: tuneup (a full 60k) the one never to miss.
3: CEL indications running.



Jan 14, 2014 | 1998 Toyota Caldina G

1 Answer

My 2004 ford expedition idles rough like its going to cut off The idling jumps up and down in park or drive only when stopped Service engine light cuts off and on periodically what could be happening


run a teat. Remove the vacuum line from the brake booster and plug off. Start engine and see if it idles normally. . Put your foot on the brake pedal and apply the brakes . If the idle is still normal replace the brake booster as there is an air leak in the diaphram.. The service light is probably recording misfiring and air fuel mixture problems.. run fault codes any way just to check it out .

Dec 23, 2013 | Cars & Trucks

1 Answer

Stalls at stop light and rush hour traffic


disconnect the vacuum line to the brake booster and plug off to the engine. run the engine and apply the brakes and see if it still cuts out. If not the reattach the vacuum hose and re apply the brakes . If there is a stall then replace the brake booster as there is a fault in it that is allowing air into the manifold on brake application. This problem is not connected to the CPU by sensor so no faults would be recorded.

Dec 22, 2013 | 2008 Chevrolet Impala

1 Answer

Ymy battery light came on and everything on dash


shaking?
that means the engine stalled.
when the engine stalls. (do a tune up)
as the engine misfires, grossly , the 4 cyl . engine will shake.
and then it stalls
and many cluster lamps glow, CEL lamp. and charge glow.
you failed to look at engine RPM its wrong.
the normal hot RPM is about 800RPm for most cars.
and the engine EFI brain regulates there.
if the ECU brain can not regulate RPM at 800 that means you have gross misfiring, (lots of causes)
#1 cause, not doing tune ups, (aka, the 60k service points)

Oct 30, 2013 | 2003 Honda Civic

Not finding what you are looking for?
2001 Daewoo Lanos Logo

Related Topics:

428 people viewed this question

Ask a Question

Usually answered in minutes!

Top Daewoo Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

yadayada
yadayada

Level 3 Expert

74896 Answers

Steve Hurc
Steve Hurc

Level 3 Expert

450 Answers

Are you a Daewoo Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...