Question about 1994 Chevrolet Camaro

1 Answer

Replace 1994 chevy camaro window motors

I got the door panel off. Now i need step by step instructions on how to take out the window regulator and motor, take off the motor, install new motor, replace window regulator with new motor.

Posted by on

  • Anonymous Mar 31, 2014

    window regulator electric motor

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 56 Answers

The best thing that u can do is go to the store and buy the repair manual for your car they usually run between $15 and $20 and they will have step by step instructions and pics....not only is it good for this but pretty much anything else u want to know about ur car..hope this helped

Posted on May 22, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

3 Answers

Window wont go up and down


What you will need is a replacement Window Regulator. You should be able to find one online for around $50.00. Make sure you Order the correct one. Drivers Side Front..... Passenger Side Rear... Each would be different. Removing the inner door panel. Check for videos on Youtube for your model and year to watch step by step instructions. On a scale of 1 to 5 this would be 3 to replace. Removing the regulator and getting the new one into place can be tricky. Just take your time and pay attention to how you remove the old one and what bolts and screws go where.

Aug 18, 2014 | 2000 Buick LeSabre

1 Answer

How to replace a electric motor for power window in 1994 honda accord


How to Replace a Window Regulator (with Motor)
(DIY Complexity: Moderate / DIY Time: 2.8 hours)

Parts:
1. Window Regulator

1ed581e.jpg


Tools:
1. Screwdriver
2. Trim Panel Removal Tool
3. 3/8 in. Drive Ratchet
4. Socket Set
5. Riveter Kit

Steps:
Step 1 Remove the door panel by removing the handles and switches. It is required to unscrew or unclip the panel.
o Tip: Safety Tip:Always wear safety glasses when working on your vehicle. Wear other personal protective equipment (PPE) when necessary, for example latex gloves or safety shoes.
o Tip: Refer to the vehicle specific service manual if available. There are several fragile plastic clips and hidden screws on the door panel that will break if removed improperly.

Step 2 Remove the vapor barrier.

Step 3 Disconnect the glass from window regulator.

Step 4 Tape the glass to door frame. The glass should not require removal.
o Tip: Tape the glass out of the way to allow access to the window regulator and window lift motor assembly.

Step 5 Disconnect the electrical connector from the window motor.

Step 6 Remove the window regulator mounting bolts. Slide the regulator assembly out through the interior access opening of the door. Remove the motor.

Step 7 Attach the original motor to the new window regulator and install the regulator assembly. Tighten the mounting bolts.

Step 8 Reconnect the electrical connector to the window motor.

Step 9 Install the window back onto the window regulator.

Step 10 Re-install the vapor barrier.

Step 11 Re-install the door trim panel and handles/switches.

Step 12 Test the power window for proper operation by rolling the window up and down in complete cycles for proper testing.
o Tip: After re-installing a window lift motor and regulator, it may be necessary to re-program it following manufacturer specific instructions. Not following or performing this step may result in improper power window function.


Hope helps (remember comment and rated this).

Jun 18, 2010 | 1994 Honda Accord

1 Answer

My automatic window does not work and the window is down. the motor seams to be getting power with no response. how do i manually put the window up until i replace the motor?


If you hear the motor turn or try to turn the regulator cable is most likely snapped and wound up in one of the pulleys. You will have to remove the door panel and cut the cable with some tin snips or a similar tool. You could then pull the window up and wedge a piece of wood in the door panel to hold the window up. The regulator / motor assembly is only about $150 from the dealer. Check out this link for some pictures and step by step instructions on removing your door panel.

Jun 06, 2010 | 2001 GMC Yukon

1 Answer

I need to see how to change a window motor in a 1995 Chevy Camaro.


I'm sorry, can't contact with your chat request because I having other question open; I suggest check this proceduro for GM Camaro/Firebird 1993-1998 Repair Guide...

Window Regulator and Regulator Motor
REMOVAL & INSTALLATION
(see Figures 1 and 2)
  1. Remove the door trim panel and inner panel water deflector.
  2. Raise the window to half-up position and hold in place by inserting a rubber wedge door stops at the front and rear of the window between window and inner panel.
  3. Remove the rear guide channel and inner panel cam channel.
  4. Punch out the center pins of the regulator rivets; then drill out the rivets using a 1 / 4 in. (6mm) bit.
  5. Move the regulator rearward and disconnect wire harness from the motor (if equipped). Disengage the roller on the regulator lift arm from glass sash channel.
  6. Remove the regulator through the rear access hole.
ebf548d.jpg

Fig. 1: Front door window regulator mounting

CAUTION If electric motor removal from the regulator is required, the sector gear must be locked in position. The regulator lift arm is under tension from the counterbalance spring and could cause personal injury if the sector gear is not locked in position.
  1. Drill a hole through the regulator sector gear and backplate and install a bolt and nut to lock the sector gear in position.
  2. Using a 3 / 16 in. (5mm) bit, drill out the motor attaching rivets and remove the motor from the regulator.
00f7a3c.jpg

Fig. 2: Locking the sector gear on the window regulator motor



To install:

  1. To install the motor to the regulator. Use a rivet tool, J-29022 or equivalent, and install 3 / 16 in. (5mm) rivets or 3 / 16 in. (5mm) nuts and bolts. Remove the bolt and nut used to secure the sector gear in position.
  2. Place the regulator through the rear access hole into the door inner panel. If the electric regulator is being installed, engage the wire connector to motor prior to installing the regulator to the inner panel.
  3. Locate the lift arm roller into the glass sash channel.
  4. Using rivet tool J-29022 or equivalent, rivet the regulator to the inner panel of the door using 1 / 4 in. (6mm) 1 / 2 in. (13mm) aluminum peel type rivets (part No. 9436175 or equivalent). If the rivet tool is not available, use the following nut and bolt method:
    1. Install U-clips on the regulator at the attaching locations. Be sure to install the clips with clinch nuts on the outboard side of the regulator.
    2. Locate the regulator in the door inner panel. If the electric regulator is being installed, connect the wire connector to the regulator motor.
    3. Locate the lift arm roller in the glass sash channel.
    4. Align the regulator with clinch nuts to holes in the inner panel.
    5. Attach the regulator (and motor) to the door inner panel with 1 / 4 -20 x 1 / 2 in. screws (part No. 9419723 or equivalent) into 1 / 4 in. (6mm) nuts with integral washers. Tighten the screw to 90-125 inch lbs. (10-14 Nm) torque.
  5. Install the inner panel cam channel and rear guide channel.
  6. Remove the rubber wedge door stops at the front and rear of the window between window and inner panel.
  7. Install the inner panel water deflector and the door trim panel.

Hope helps (remember rated this).

Jun 04, 2010 | 1995 Chevrolet Camaro

2 Answers

How do i replace the power window door regulator?


auto zone can print for you the step by step instructions, they have alldata

Jan 21, 2010 | 2002 Ford Explorer

1 Answer

Passenger power window for a '96 chevy camaro wont go down or up


Mine wont either actually, you just need to take out the door panel and change out that motor. Buy the book for that car at your local autoparts store and it will tell you how to change it out step by step.

Oct 24, 2009 | 1996 Chevrolet Camaro

1 Answer

Replacing window motor 95 camaro


Remove the door panel,to get access to the motor.remove the motor and window regulator together,DO NOT take the motor off without taking them out together.Place the window regulator in a vise(very important) get a drill bit large enough to drill off the 4 giant ribbits.you can replace the ribbits with small screws,most of the time they come with the new motor.
Don't forget to unplug the motor.

Aug 04, 2009 | 1995 Chevrolet Camaro

3 Answers

1997 chevy camaro driver side window (power)


pull off the door panel and make sure the motor is turning and there is nothing blocking the window from going up or down the motor might be burnt out but the switch is still clicking the relay on and make sure you spray the gears and window wires not the electrical wire with white lithium greese

May 19, 2009 | 1997 Chevrolet Camaro

1 Answer

Replace a window regulator in a 1994 ford explorer


wow, a lot of work to do.

Window Regulator, Front Door, Explorer Removal
srk~us~en~file=ani_caut.gif~gen~ref.gif WARNING: IF THE REGULATOR COUNTERBALANCE SPRING MUST BE REMOVED OR REPLACED FOR ANY REASON, MAKE SURE THAT THE REGULATOR ARMS ARE IN A FIXED POSITION PRIOR TO REMOVAL TO PREVENT POSSIBLE INJURY DURING C-SPRING UNWIND.
  1. Remove front door trim panel and front door trim shield . Refer to Section 01-05B .
  1. Remove inside door belt weatherstrip and glass stabilizer.
  1. Remove front door window glass as described in this section.
  1. Remove two nut and washer assemblies attaching the equalizer bracket.
  1. Remove three rivets (manual) or four rivets (power) attaching the regulator base plate to front door trim panel finish panel (23712) .
  1. Remove window regulator electric drive and front door window channel bracket from vehicle.
  1. Working on a bench, carefully bend tab flat to remove arm slides from front door window channel bracket .
  1. Install new window regulator electric drive arm plastic guides into front door window channel bracket and bend tab back to 90 degrees. Use care not to break tab; if tab is cracked or broken, replace front door window channel bracket . Make sure rubber bumper is installed properly on new front door window channel bracket , if replacement is made.

    4a5a8fb.gif

Installation
NOTE: The front door window channel bracket and window regulator electric drive are installed into the vehicle as one assembly. The front door window channel bracket may be disassembled from the window regulator electric drive as described in Steps 7 and 8 of Window Regulator, Removal.
  1. Install front door trim panel finish panel with preassembled glass bracket into vehicle. Set the regulator base plate to window regulator electric drive using base plate locator tab as a guide.
  1. Install three (manual) or four (power) rivets (385189-S100) to attach regulator to front door trim panel finish panel . Two 1/4-20 x 1-inch bolts and two 1/4-20 nut and washer assemblies may be used as alternates for glass retention. However, torque must not exceed 4-7 Nm (3-5 ft-lb). Equivalent metric retainers may be used.
  1. Install equalizer bracket.
  1. Install inside door belt weatherstrip and glass stabilizer.
  1. Lower regulator arms to access holes in front door trim panel finish panel . Install front door window glass as outlined.
  1. Adjust glass to ensure proper alignment with glass run. Cycle glass for smooth operation.
  1. Install front door trim panel and front door trim shield . Refer to Section 01-05B .

Apr 11, 2009 | 1994 Ford Explorer Limited

1 Answer

Electric window motor


You will have to remove the regulator and replace the motor out side the door. clamp the regulator in a vise before unbolting the motor as there is a spring that will snap the mechanism and hurt you.

Dec 28, 2008 | 1983 Chevrolet Camaro

Not finding what you are looking for?
1994 Chevrolet Camaro Logo

677 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75197 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7782 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...