Question about Honda Pilot
Check the system for a vacuum leak. Check manifold ---vent control hoses - and any other actuators that are vacuum operated.
Posted on Jan 04, 2014
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Okay, here goes-
1. Turn Key to on position.
2. Push and hold **valet button on the stock radio.
**Valet button is skinny bar located between am/fm & cd/tape buttons on stock radio.
Door locks will cycle one time.
3. Press any button on remote one time within 20 seconds. Door locks will cycle again.
4. To program up to 4 additional remotes repeat step 3 for each additonal remote.
5. Turn key off programming is complete.
Thanks for using Fixya, please rate if this helps :)
Posted on Mar 16, 2009
Go to your local library and ask the Librarian to get you on-line to the Automotive Repair Reference Center, and then to the EBSCO database...you will find all of your wiring diagrams there.
Posted on Oct 07, 2009
The PGM Main relay is outboard of the glove box. You can see it if you get the glove box out of the way, but to remove it, you need to pop the triangular shaped plastic trim off of the end of the passenger side of your dash. The relay is held in place with one 10mm bolt and the electrical connector.
Posted on Oct 20, 2009
Tips for a great answer:
Jan 07, 2014 | Mitsubishi Cars & Trucks
May 17, 2011 | Mitsubishi Montero Sport Cars & Trucks
Jan 16, 2011 | 2010 Volkswagen Tiguan
Jul 08, 2009 | Renault Sport Cars & Trucks
Aug 16, 2008 | 2005 Volkswagen Golf
Aug 05, 2008 | 1991 BMW 5 Series
111 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: