Question about 1995 Honda Accord
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
it is the Transmission Control Unit. you have to find the reason why the TCU is flashing the D4 fault code. not replace the unit. have your vehicle scanned for another code. your transmission or transaxle is giving you a warning that something is wrong .
Posted on Nov 21, 2008
You seem to have two (2) separate problems one may be a BAD brake light switch this switch is mounted at the top of BRAKE pedal and control the locking mechanism on gear shifter(safety component-for example if a kid is sitting in seat with vehicle running he/she will NOT be able to put vehicle in gear without stepping on brake). The other problem is a BAD shifter cable-this cable moves the selector in the transmission when you move shift knob. Good luck and thanks for using FIX YA
Posted on Jan 11, 2009
First thing to do,try to pump your clutch before you shift into 1st gear then if you feel makes better, most probably you have problem with your hydraulic clutch system, check the clutch line if there is an evidence of fluid leaking or it could be internal leak.
Second thing to do, check your transmission oil, may be it' s too old or you use a thick oil thats why when cold its hard to shift then when the engine rich the normal temperature(warm) the oil become thin and the shifting will smooth. Remember the very old oil become thicken and the purity is gone and can cause of hard shifting. in this regards i suggest you to change the transmission oil and check the used oil if there is small peace of metals, then you are in big trouble,
Posted on Mar 12, 2009
If you press the Break pedal and the shift button does not engage, Your Solenoid did not activate to release it out of park. either the: solenoid is out - Bent levers - Solenoid harness disconnected - Break activation wire may be damaged. this piece is easy to replace as it sits on the right side (passanger side) of the shift lever. remove center console cover to access the soleniod which is held on by two 10mm nuts. and a C- clamp
Posted on Sep 03, 2010
Tips for a great answer:
Aug 03, 2017 | 1995 Honda Accord
Jun 10, 2012 | 2004 Honda Accord
May 06, 2010 | 1999 Honda Accord
Feb 21, 2010 | 1992 Honda Accord
Mar 08, 2009 | 1994 Honda Accord
Jan 30, 2009 | 1991 Honda Accord
Dec 30, 2008 | 1996 Honda Accord
167 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: