Question about Cars & Trucks

1 Answer

Locate the spark plugs ona 2004Toyota Sienns Van

Locate spark plugs??

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Cars & Trucks Master
  • 3,103 Answers

Really?? you know what you are looking at?? find a plug lead.. follow it down from the coil/distributor..to the motor.. that end goes on the plug...viola!!!

Posted on Jan 04, 2014

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a Nissan Quest SE 2005 misfire I was told to check the fuel. filter I Already change the coils n spark plugs. It misfire on idial


Follow your fuel lines from the the engine back to the tank.They usually run right along the frame.Check for your filter along the lines you will see a filter in there somewhere.

Apr 02, 2014 | Cars & Trucks

1 Answer

Locate spark plugs


The are on the engine block. Sometimes the can be behind. On my van I had to take the windshield wiper assembly and reach around the back of the engine to get to them.

Jan 12, 2014 | 2005 GMC Envoy

1 Answer

How to replace spark plugs in 2000 chevy astro van


to change the spark plugs on the 2000 astro van you have to jack van up and take front tires off then you can go thru the rubber dust gaurd over the top a frame to get to the plugs

Jan 07, 2013 | 2000 Chevrolet Astro

1 Answer

I changed spark plugs now van wont start,i have changed coils still wont start,


Hello,
Was the van starting before you changed the spark plugs and coils?

Is the engine turning but not starting?

Please reply in comments so I can help you.
Thanks, Donnie

Feb 17, 2011 | 2000 Chrysler Grand Voyager

1 Answer

Where is the crank censor locate on a lumina van 1995


Hi, it is on the rear of the engine just below the middle spark plug just above the transmission oil pan

Nov 27, 2010 | 1995 Chevrolet Lumina

1 Answer

1999 safari van 4.3 6 cyl. has a service code PO


P0301 is a DTC code that indicates a misfire to cylinder one. It could be a bad spark plug, spark plug wire, rotor and cap, a dirty fuel injector, or the worst a bad head gasket. Cylinder 1 is the first cylinder on the drivers side, towards the front. Start with the simple and check the spark plug wire and add fuel injector cleaner to the gas tank. Good luck and hope this helps you get you van running 100% soon. If that did not help, then your going to have to do a tune up by replacing the spark plugs, wires and rotor and cap. You can get all the parts you need at Auto Zone and they can give you the step by step to get the job done with common tools in under 2 hours of your time. Keep me posted, be glad to know you got your van running 100% again soon.

Oct 27, 2009 | 1999 GMC Safari

2 Answers

Changing spark plugs in a 2000 Poitiac van.


There are a few ways to doing this, and it takes time and a few band aids. You can remove the alternator to give you some room to access the rear spark plug with an extension and swivel spark plug socket. You can also get to the plugs from under neath if you have a ramp and long arm, an extension and swivel spark plug socket will help. You may have to use a 2x4 to wedge the engine to give you some room if you have larger arms. The other way is to tilt the engine forward by disconnecting the two top engine mounts. First replace the 3 front plugs and wire one at a time so you don't cross them. After you have changed the front plugs have a friend help you. Make sure the parking brakes are on and disconnect the two top engine mounts, release the parking brakes and let the transmission in park. Push the van forward slowly to tilt the engine forward far enough to give you room with out pushing it to far in to the radiator. Put the parking brakes on again to keep the van from rolling back and place a block of wood behind and in front of the rear wheels. Don't want to lose an arm. Replace the rear plugs with extensions and a swivel spark plug socket. Note, your going to have to replace the spark plug wire since the rear ones are really hard to remove and pulling on then will destroy them, not worth the headache trying to save them. Use platinum plugs so you can get 100.000 miles before you have to change them again so use anti-seize on the plugs so you can remove them again. Good luck and hope this helps, I personally go from under the van. 

Jul 06, 2009 | 2000 Pontiac Montana

1 Answer

1998 mpv van strange problem of starting


locate the starter relay and possibly the ignition relay on the fuse panel under the hood or under the dash and replace it.

Robert

Jan 10, 2009 | 1995 Mazda MPV

1 Answer

Moms van


Hello, I'll need some more info, when u turn the key to start the van, the engine turns over (this is the same thing as cranks over, or cranks) but it won't start. Do I understand it correctly? If this is the case, u must check to see if u have spark at the spark plugs, if u do u must then check to see if gas is reaching the plugs. Those are the 2 main requirements of an engine running, spark and gas. The easiest way to check for spark, is to purchase one spark plug for your van, remove one spark plug wire by pushing in, while twisting, then pull out while twisting the wire ( hold the wire as close to the spark plug as possible so u won't damage the wire). Connect the new plug to the spark plug wire, place it on a metal surface, turn the key to crank the engine over (do NOT hold the plug while turning key on!!) , watch the tip of the plug for spark. Do this out of the sun, and it will be very obvious if u have spark at the plug or not. Let me know what u find.

Oct 29, 2008 | 1997 Nissan Quest

2 Answers

Motor Oil in with spark plugs, backfiring and stalling.


hey i actually just dealt with this problem last week ona friends car. the oil in the center with the spark plugs is because you need a new valve gasket. not a cover unless its cracked just the gasket and it costs about 25 dollars at your local parts store. its very easy to install and a quick fix but try to get all the oil out of the center as you can and rub a little bit of old oil on the gasket before you install it. it helps stop dry rot. try this first and then see if the backfiring and stalling stops. if not, you may need to change your spark plugs again even if you already have because chances are the oil thats already in the hole has burned up the spark plug. so give your spark plugs a good check while you change your valve gasket.

Aug 05, 2008 | 2001 Kia Rio

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

14 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75066 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...