Question about 2003 Chevrolet Silverado 1500
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Caliper mount bolts are 74 ft/lbs
Driveshaft axle nut is 177 ft/lbs
Hub and bearing mounting bolts are 133 ft/lbs
Posted on Sep 10, 2009
Testimonial: "The info on the torgue specs was very helpful. I couldn't find it anywhere. Thanks a bunch!"
The torque for the front drive shaft and hub retaining nut is 155ft.lbs. But if you are on the metric system,
it's 210N.m . These specs are for both 1999 and 2001
Hope this helps. Good luck.
Posted on Jan 24, 2010
the big one tighten with a big bar and pull it to about 120lbs ,the three smaller ones which i cannot place at the moment but if they are 17mm size heads then about 60 but i always feel them as i do them and never use a torque wrench or a air wrench ,just muscle and 40yrs of feel
Posted on Mar 02, 2010
Tips for a great answer:
Jan 28, 2017 | Suzuki Cars & Trucks
Jan 12, 2014 | 2006 Chevrolet Uplander LS
Dec 03, 2011 | 2003 Chevrolet Silverado 1500
Aug 05, 2011 | 2000 Chevrolet Silverado
Sep 10, 2009 | 1999 Chevrolet Silverado 1500
Apr 24, 2009 | 2003 Chevrolet Silverado 1500
89 people viewed this question
Usually answered in minutes!