Question about Dodge Cars & Trucks

Open Question

Flickering headlights my headlights switch is off but my lights are on then when switch is on high beam wont work and with switch is on my lights start Flickering for 5 min then stop

Posted by on

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Thunder55
  • 318 Answers

SOURCE: headlights flickering

This could be caused by a lot of different things,,but usually it is the fault of the Headlight Relay.
Try replacing the relay before going further.

Posted on Jan 30, 2009

emissionwiz
  • 75807 Answers

SOURCE: low beam lights not working

this is usually the headlight switch that causes this problem, burned connector to switch or contacts in switch or both.

Posted on Apr 08, 2009

ZJLimited
  • 17970 Answers

SOURCE: headlights not working properly on 1995 firebird

First check harnesses ground connectiosn and wires.

Hope helps.

Posted on Feb 07, 2012

mikek92580
  • 378 Answers

SOURCE: 94 dodge dakota healdights turn on and off while driving

make sure they are canected tight and look for the short or ground you got the right idea now fix before people pull over for you thinking your a cop

Posted on Dec 02, 2012

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Both my low beam and high beam wont work. And my headlights wont go down even when lights are turned off and the button is unpressed on the inside.


check the headlight relays ,
Check for possible faulty light stalk switch also. Dash lights may fail with this possible cause.
Check fuses

Jan 25, 2016 | 1992 Mazda MX-5

1 Answer

Turn on headlights and switch to high beams and all the dash lights and headlights go out. I replaced the multifunction switch and the headlight switch.


May I humbly suggest you not turn on the high beams again until the problem is repaired?
There is a small danger of fire.
I am suggesting you have either a wire that is shorted out, as might happen because of an automobile accident, or a headlight relay shorted out.
Often those relays are located inside a black plastic box under the hood of the car.
Sharing the year, make, and model of vehicle could cause someone else with a similar vehicle to offer some assistance as well.
God bless your efforts.

Dec 07, 2015 | Cars & Trucks

1 Answer

Why wont the headlights won't go on


It can have a bad headlight switch, but most often it is a bad high beam switch on the floor.

Turn on the headlights and press the high-beam switch off and on a few times, if the headlights flash, flicker, or start working again then replace the high-beam/dimmer switch.

Apr 19, 2010 | 1982 Ford Ltd

1 Answer

Headlights wont work


Fuse 22 and fuse 23 are left and right low beam headlamp fuses located in the PDC. 23 and 24 are high beam fuses. There is also a low beam and a high beam relay in PDC as well. If no headlights work I would check for main switch or multifuction switch (wiper/high beam) since each light has its own fuse and relay.

Jun 05, 2009 | 1997 Dodge Caravan

1 Answer

Low beam lights not working


this is usually the headlight switch that causes this problem, burned connector to switch or contacts in switch or both.

Apr 08, 2009 | 2006 Suzuki Reno

2 Answers

Headlights flickering


This could be caused by a lot of different things,,but usually it is the fault of the Headlight Relay.
Try replacing the relay before going further.

Jan 30, 2009 | 1983 Ford Thunderbird

2 Answers

High beams wont turn on.


First place to start is with headlight switch. I did have a case many years ago when both high beams were blown out at once, but this is rare. When you have the headlight switch out, jump power from te low beams to the high beam contacts. If high beams come on, replace switch.
Bill

Nov 19, 2008 | 2004 Ford Explorer Sport Trac

1 Answer

Headlights


hi try having your head lamp combo switch checked sounds alot like it.

cheers
mark

May 29, 2008 | 1992 Ford Festiva

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

349 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

75807 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22133 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8172 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...