Question about 2003 Dodge Caravan

Open Question

Transmission problems I have code p0732 on my scanner what is this code

Posted by on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Code p0732


P0723: Output Speed Sensor Intermittent Signal
Read more: http://www.autocodes.com/p0723.html

P0732: Gear 2 Incorrect ratio
Read more: http://www.autocodes.com/p0732.html

Oct 04, 2016 | Cars & Trucks

2 Answers

I have a 2004 dakota codes p0052 p0732 p0720 p0731 p0700. Bought non running and had a 3.7 installed got back and it jerks when taking off and won't shift out of 1st gear. Limp mode? Any ideas?


P0700 Transmission control system malfunction
P0720 output speed sensor circuit malfunction
P0731 gear ratio error in first gear
P0732 gear ratio error in second gear

May 24, 2015 | 2004 Dodge Dakota

1 Answer

My car has a code for P0732 what part will fix that on a 2004 Nissan sentra thanks


P0732 Nissan - 2nd. Gear Malfunction Possible causes
- Low transmission fluid level
- Dirty transmission fluid
- Faulty Shift Solenoids
- Shift Solenoids harness is open or shorted
- Shift Solenoids circuit poor electrical connection
- Transmission mechanical problems
- Transmission hydraulic control circuit

Apr 06, 2015 | Nissan Cars & Trucks

1 Answer

Interrogate ecu using atologic P0732 Gear 2 incorrect ratio P07667 shift Sol d


Gear 2 Incorrect Ratio Our emissions expert has put together the following information about the P0732 fault code. We have also included diagnostic procedures you can take to your repair shop if the mechanic is having difficulty analyzing the code.
OBD II Fault Code
  • OBD II P0732
Fault Code Definition
  • Gear 2 Incorrect Ratio
What does this mean?
The purpose of the automatic transmission is to match the engine's optimum power and torque characteristics to the driver's desired rate of acceleration and speed by auto-selecting different gear ratios or 'speeds' to power the wheels.
Code P0732 When the code P0732 is set in the Powertrain Computer, it means that the Powertrain Computer or PCM is seeing a greater than a specified RPM difference between the rotational speed of the Input RPM Sensor and the Transmission Output RPM Sensor when the vehicle is in 2nd gear. This can occur during shifting or when driving at steady speeds. It often implies that the transmission is slipping.
Symptoms
  • Check Engine Light will illuminate
  • Vehicle will not shift properly
  • Decrease in fuel economy
  • In unusual cases, there are no adverse conditions noticed by the driver
  • In some cases, there may be performance problems, such as dying when coming to a stop after driving on the freeway and/or misfire-like symptoms
Common Problems That Trigger the P0732 Code
  • Defective 2nd gear shift solenoid
  • Defective 2nd gear related gear set or clutch pack
  • Defective Engine Coolant Temperature Sensor
  • Defective Valve Body
  • Dirty transmission fluid that restricts the hydraulic passages
Common Misdiagnoses
  • Engine Misfire problem
  • Internal Transmission problem
  • Driveline problem
Polluting Gases Expelled
  • HCs (Hydrocarbons): Unburned droplets of raw fuel that smell, affect breathing, and contribute to smog
  • CO (Carbon Monoxide): Partially burned fuel that is an odorless and deadly poisonous gas
  • NOX (Oxides of Nitrogen): One of the two ingredients that, when exposed to sunlight, cause smog
P0732 Diagnostic Theory for Shops and Technicians
When diagnosing a P0732 code, it is important to record the freeze frame information and then to duplicate the code setting conditions with a test drive. Pay close attention to the engine load, throttle position, RPM, and road speed because a P0732 can be difficult to detect.
One should monitor the RPM input speed and compare that to output speed RPM on a smooth, flat surface after the vehicle is warmed up and the fuel system is in a closed loop. Monitor how the 2nd gear solenoid configuration responds to an increased amount of throttle. The 2nd gear related solenoid should stay in 2nd gear and the transmission should NOT slip.

PO766

Possible causes- Low transmission fluid level
- Dirty transmission fluid
- Faulty shift solenoid D valve
- Shift solenoid D valve harness or connectors
- Shift solenoid D valve circuit is open or shorted
Tech notesWhen the a transmission solenoid is stuck off, in most cases the problem is not the electrical part of the solenoid; the problem is foreign material obstructing the mechanical function of the solenoid or the flow of the fluid through the transmission valve body. If the transmission fluid is very dirty, it is recommend changing the transmission fluid and if possible removing the transmission pan for further diagnosis. Excessive debris or metal particles on the transmission pan could be an indication that there is a transmission mechanical failure and that the transmission will need to be rebuilt or replaced. When is the code detected?The P0766 code is detected when the ECM has detected a mechanical fault with the solenoid energized, valve stuck off P0766 Description Shift solenoid valve D is turned ON or OFF by the Transmission Control Module (TCM) in response to signals sent from the park/neutral position (PNP) switch, vehicle speed and Engine Control Module (ECM) (throttle opening). Gears will then be shifted to the optimum position.

Mar 16, 2015 | 2006 Ford Focus

1 Answer

2003 mitsubishi outlander rough idle won't stay on and wont run with load


p0134 - Bad O2 Sensor or faulty sensor wiring

p0132 - Bad O2 sensor (Bank 1 Sensor 1)

p0401 - Exhaust Gas Recirculation insufficient

p0113 - Defective intake air temperature sensor/ clogged air filter/ faulty Mass Air Flow (MAF) sensor.

p0101 - Vacuum leak/ defective MAF sensor/ damaged intake manifold gasket

p0107 - Faulty Barometric Pressure sensor or its wiring system

p0758 - Low transmission fluid/ Dirty transmission fluid/ Shift Solenoid B wiring problem or its valve

p0753 - Low transmission fluid/ Dirty transmission fluid/ Shift Solenoid A wiring problem or its valve

p0736 - Transmission problem/ Low transmission fluid/ Dirty transmission fluid/ Shift Solenoid wiring problem or its valve/ Transmission hydraulic control circuit

p0735 - Transmission problem/ Low transmission fluid/ Dirty transmission fluid/ Shift Solenoid wiring problem or its valve/ Transmission hydraulic control circuit

p0732 - Transmission problem/ Low transmission fluid/ Dirty transmission fluid/ Shift Solenoid wiring problem or its valve/ Transmission hydraulic control circuit

p0720 - Damaged speed sensor/ its harness/ connector

Jun 12, 2013 | 2003 Mitsubishi Outlander

1 Answer

HI i Scanned my Ford Explorer to a computer and i got codes P0732 and P0735 can i get a little info about the codes and how to fix the problem


P0735 FORD - Automatic Transmission Incorrect Fifth Gear Ratio Incorrect Possible causes - Low transmission fluid level
- Dirty transmission fluid
- Shift solenoids
- Transmission mechanical problems
- Transmission hydraulic control circuit

P0732 FORD - Automatic Transmission Incorrect Second Gear Ratio Incorrect All - causes would be the same as above with ALSO Probable bad valve body - and or pressure solenoids. Probable bad clutch band. If the fluid is ok and if you have tried changing the fluid and filter to no aval. Is it time to think about a transmission repair at a local transmission shop. Sorry.

Sep 12, 2011 | Ford Explorer Cars & Trucks

1 Answer

I have a doge gran carvan 2000 or 2001 3.3v6 i have cods coming up as falows p1775 p0732 p1788 p0700 p0456 can eny buty tell me wher to start got it today at an auction dont know much


CODE P1775 - A / T OR AUTOMATIC TRANSMISSION SWITCH LATCHED IN TCC POSITION. CODE PO732 - A / T ADDITIONAL GEAR RATIO ERROR IN SECOND GEAR. CODE PO700 - AUTOMATIC TRANSMISSION CONTROL SYSTEM MALFUNCTION CODE PO456 - EVAP SYSTEM SMALL LEAK DETECTED.POSSIBLE CAUSE FUEL TANK CAP LOOSE OR DAMAGED , SMALL LEAK PRESENT SOMEWHERE IN EVAP SYSTEM. I DID NOT SEE CODE P1788. BUT CODES P1775, P0732 , PO700 , YOU HAVE INTERNAL TRANSMISSION PROBLEMS TRANSMISSION SHOP HAS TO HOOK DIAGNOSTIC EQUIPMENT TO CHECK TRANSMISSION PRESSURE SOLENOIDS AND SHIFT SOLENOIDS. TRANSMISSION VALVE BODY HAS MANY SOLENOIDS PRESSURE SWITCH AND SENSORS COST TOO MUCH REPLACE THEM ALL LET GARAGE SCANNED TRANSMISSION BE MUCH CHEAPER.

Nov 07, 2010 | Dodge Caravan Cars & Trucks

1 Answer

What do the following codes mean: P0734,P0732,P0715, and P0731. this is the order they came up in the scanner..all I can find is that they are generic codes. Should I be worried I was able to clear my...


P0715 Input/Turbine Speed Sensor Circuit Malfunction
P0731 Gear I Incorrect ratio
P0732 Gear 2 Incorrect ratio
P0734 Gear 4 Incorrect ratio
It seems like you were having an issue with your transmission but if you cleared your light and it has stayed off I would just keep a close eye on it.

Jun 10, 2010 | 2000 Dodge Durango

1 Answer

Hi i have a 99 hyundia elantra my check engine light is on the codes are p1624,p0137,p0732and p0740 are these codes connected or different problems


As for p1624 this code is for the accent only.
p1613 means the same thing but for the elantra, the
code means malfunction indicator light(mil) signal
circuit input high volt. p0137 means ho2sensor high
voltage (fuel pressure out of range high) p0732 is a
transmission code. It means that due to a malfunction in the trans. circuit, the trans. will operate in limp mode meaning you have reverse and
one forward gear in this case 2nd gear. That brings
us to p0740 this code indicates a malfunction with
the damper clutch control solenoid at the trans. this
would cause the p0732 limp mode. But if your car
is not showing any of these problems, the cause may
be the engine control module or the transmission
control module. But this would have to be checked
with the proper test scanner. Hope this helps.

Feb 19, 2010 | Hyundai Motor 1999 Elantra

3 Answers

My check engine light came on and i pulled the code po732. what does it mean?i have a 2007 chrysler pacifica awd. I'm lost can't find a manual


Most part places will have manual's.

Code - P0732 - Gear 2 incorrect ratio.
Transmission problem. Could be a sensor, I would reset computer see if it come's back, if it does have it check out could cause major damage if not taken care of.

Feb 03, 2010 | 2007 Chrysler Pacifica FWD New Cars

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

19 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

76649 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8522 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...