Question about 2004 Volkswagen Touareg

2 Answers

TRANSFER CASE STACK IN LOW RANG. SELECTOR SWITCH FOR HIGH/ AUTO DIFF SWITCH FLASHING.

Posted by on

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Hi,

I had the same problem with my touareg 2006

The reson was the battry.

try to replace your battrey and it will work.

Posted on Sep 17, 2009

Ad
  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

Yes it will be the baterry problem.

Posted on Apr 10, 2013

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What issues would make the front differential not shift from 4wd hi to 2wd.


ratio changes of from 4wd to 2wd are performed in the transfer case and not the diff
so if the front appears not to be changing from high to low check the problem in the transfer case selector or actuator

Mar 09, 2017 | Cars & Trucks

1 Answer

2003 Silverado 4WD. Service 4WD dash light comes on after engaging 4WD and acts up by engaging itself randomly for several days, then goes back to normal.


Check connection at the 4X4 control module , check power and grounds . Do you know how to do basic electrical testing ? Does your truck have manual or automatic trans mission ? Which transfer case does yours have ?

The NVG 263 transfer case features a three button shift control switch located on the instrument panel. When the ignition is in the RUN position, the transfer case shift control module (TCCM) starts monitoring the transfer case shift control switch to determine if the driver desires a new mode/gear position. At a single press of the transfer case shift control switch, the lamp of the new desired position begins flashing to inform the driver that the TCCM has received the request for a new mode/gear position. The lamp continues to flash until all shifting criteria has been met and the new mode/gear position has been engaged. Once the new mode/gear position is fully active, the switch indicator for the new position remains ON constantly. In the event that the TCCM can not or will not complete the shift, the indicator returns to the previously selected position; this is a Transfer Case Shift Control Switch Indicator Flashes, then Returns to Previous Mode condition.

The NVG 263 transfer case provides the driver with 4 manual mode/gear positions:
• 2HI - 2 Wheel Drive high range
• 4HI - 4 Wheel Drive high range
• 4LO - 4 Wheel Drive low range
• Neutral
Have it check for DTC'S - diagnostic trouble codes ?

DTC B0790
DTC B2725
DTC C0306
DTC C0327
DTC C0359
DTC C0379
DTC C0550

Your best bet would be take it to a qualified repair SHOP

Dec 28, 2016 | Cars & Trucks

1 Answer

When i press the 4x4 switch it blinks along with the 4 low switch the goes back to 2 high sometimes i can get the 2 high to work but not the 4x4


What type of vehicle is this? I'm assuming you have a part time transfer case with the 4h,4l and 2h selector switch.
Without knowing the vehicle I can't be certain, but the problem you are describing sounds like the Encoder Motor on your transfer case has gone bad.
Can you hear any noise when you try to select a gear range?

Feb 12, 2015 | Cars & Trucks

1 Answer

Error message repair 4wd


I guess you probably don't know what transfer case you have ?
SERVICE 4WD
Refer to
?€¢
Transfer Case Description and Operation in Transfer Case - NVG 149-NP3


?€¢
Transfer Case Description and Operation in Transfer Case - NVG 246-NP8


?€¢
Transfer Case Description and Operation in Transfer Case - NVG 261-NP2


?€¢
Transfer Case Description and Operation in Transfer Case - NVG 263-NP1


The NVG 246 EAU provides 5 modes, Auto 4WD, 4HI, 4LO, 2HI and Neutral.
The four manual mode, or range gear positions, of the NVG 261 transfer case are:
?€¢
2HI - 2 wheel drive high range


?€¢
4HI - 4 wheel drive high range, part-time


?€¢
4LO - 4 wheel drive low range, 2.72:1 gear ratio reduction


?€¢
N - Neutral, 4 wheel


The NVG 263 transfer case provides the driver with 4 manual mode/gear positions:
?€¢
2HI - 2 Wheel Drive high range


?€¢
4HI - 4 Wheel Drive high range


?€¢
4LO - 4 Wheel Drive low range


?€¢
Neutral


With the info I've given you ,you should be able too now !
There is probably a code stored somewhere !
DTC B0790 DTC B2725 DTC C0300 DTC C0305 DTC C0306 DTC C0321 DTC C0327 DTC C0359 DTC C0374 DTC C0379 DTC C0550.

Jan 31, 2015 | 2004 Chevrolet Silverado 2500

1 Answer

No 4x4 when turning selector switch to 4x4 position(any position)


What year is the truck ? Probably has DTC'S - diagnostic trouble code or codes stored in the transfer case shift control module. These would point to the problem .

Sep 07, 2017 | Ford Expedition Cars & Trucks

1 Answer

89 bronco ii won't go into 4x4 or low range


ON LEVEL GROUND
With the transmission selector in "park", start the motor.
With your foot on the brake pedal (steady-constant pressure), move the transmission selector gear to neutral- then turn the 4 X 4 selector knob to 4-wheel drive high. Wait for the 4 X 4 engagement.
Once it is in 4-wheel drive high, with the transmission selector still in neutral, quickly pump the brake peddle twice, keeping you foot on the brake pedal on the second pump, turn the 4 X 4 selector knob from high range to low range. The transfer case should then change from 4-wheel drive high to low.
Electronics being what they are, you sometimes have to repeat the process. You may even have to inch forward or backward.
[I have an '01 Excursion and an '05 F250 with 4 X 4 on the fly...I miss my '97 F250 with the manual 4 X 4 shift on-the-floor!]
Anyway, check the fuse panel for any blown fuses.
Double check to make sure that the problem is not just blown 4 X 4 lights on the instrument cluster. With the nob turned to 4-wheel drive, have a second person- a spotter, check to see if the drive shaft to the transfer case is moving. If it isn't, you have to delve into the troubleshooting process.
Check the solenoids, vacuum hoses, vacuum actuator, and transmission range sensor on the transfer case. .

Nov 27, 2013 | 1989 Ford Bronco II

1 Answer

I have a 1998 chevy k2500 pickup with a 5.7L V8. The problem i am having is with the 4wd. it has a 3 button electronic shift selector. when pressing the 4wd low button it will shift the motor and the front...


First, you do not need 4 low unless you're stuck out in the bush somewhere. Secondly, when you shift from 2 high to 4 high, it goes in immediately. To access 4 low, the tranny shifter must first be put into neutral, wait five seconds, then shift into 4 low. To shift out of 4 low back to 4 high, you must shift into neutral for 5 seconds again. They both flash at the same time because you have not shifted into neutral gear with the transmission.

Feb 02, 2011 | 1998 Chevrolet K2500

1 Answer

I have a 2004 GMC Envoy XL and the high range 4x4 mode will not engage. The AWD system works just fine as well as the 4x4 mode in low gear. What is causing this?


Is the Service 4WD light coming on? Do the light on the 4x4 selector switch indicate the proper selection and are on steady after a few seconds? If there is no Service 4WD light on and the selector switch light are correct, the only place for the problem to be is the Transfer Case. Has the Transfer Case fluid been changed at 50K mile intervals? This is very important.

Feb 01, 2011 | 2004 GMC Envoy

1 Answer

Electric 4WD selector switch on dash does not select/deselect 4WD. I wish to manually shift the selector at the gearbox if this is possible.


by swapping vaccum hoses on front diff shift on fly unit you can get out of 4wd or vise versa or by removing and sliding sleeve ring inside diff tube over, check range selection detent switch on this unit it is a on/off switch.these fail often

May 27, 2009 | 1995 Isuzu Pickup

1 Answer

Beeping from low to high gears in p38 diesel auto


The gearbox selector switch and/or motor located on the rear of transfer case.

long live "the green oval"

Dec 14, 2008 | 2004 Land Rover Range Rover

Not finding what you are looking for?
2004 Volkswagen Touareg Logo

Related Topics:

383 people viewed this question

Ask a Question

Usually answered in minutes!

Top Volkswagen Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

yadayada
yadayada

Level 3 Expert

76846 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8572 Answers

Are you a Volkswagen Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...