Question about 2008 Jeep Wrangler

Open Question

Bad EGR valve on 2008 jeep wrangler

Codes came up bad egr valve

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
chryslertech
  • 115 Answers

SOURCE: 2005 jeep grand cherokee limited 5.7 hemi vehicles hesitates

The egr valve is located on the front of the right cylinder head. It has a tube attached to it and going to the intake manifold.It has failed and is why your jeep is running rough and hesitating. Replace it and it will fix your driveabllity issues. Disconnect the battery for 2 min to clear the code.

Posted on Apr 02, 2009

Ad
  • 323 Answers

SOURCE: EGR Location

On the left side at the rear of the engine, and it isn't fun to change.

Posted on May 29, 2009

c17hydro
  • 2984 Answers

SOURCE: does my 2005 Jeep Grand

If you have the 4.7 engine, yes you do.


439e95e.jpg

Posted on Oct 22, 2009

  • 715 Answers

SOURCE: I am looking for the EGR valve on my 1995 Jeep

locate-ford-egr-valve-200x200.jpg EGR Valve TurnDriverSide creativecommons.com jQuery(document).ready(function(){ jQuery('.intro .thumbnail a:first').attr('href','http://i.ehow.com/images/a05/29/ff/locate-ford-egr-valve-800X800.jpg'); }); The EGR, or exhaust gas recirculation valve, takes inert exhaust gasses drawn from the exhaust system and reintroduces them into the combustion chamber through the intake manifold. This process lowers the peak combustion temperature and helps combat the formation of Nitrous Oxide (NOx) in the exhaust.
jQuery('.intro .thumbnail').each(function(i,e){ jQuery(e).find('img').one('error',function(){ jQuery(e).remove(); }); }); Difficulty: Easy Instructions Things You'll Need:

  • Needle-nose pliers
  • Flat-blade screwdriver
  • Phillips Screwdriver
  1. Step 1 Separate the intake ducts from the air cleaner assembly by loosening the retaining clamps and pulling the ducts away from the housing.
  2. Step 2 Disconnect the vacuum line from the air cleaner assembly.
  3. Step 3 Remove the wing nut that secures the air cleaner housing lid to the base.
  4. Step 4 Remove both the air cleaner hosing lid and base.
  5. Step 5 Locate the EGR valve. Look at the front of intake manifold. The EGR valve will be bolted to the intake manifold just in front of the carburetor.
jQuery('.article ol .image').each(function(i,e){ var $this = jQuery(this); $this.find('img').error(function(){ jQuery(this).remove(); $this.remove(); }); });

Posted on Jun 10, 2010

  • 492 Answers

SOURCE: I have a 1999 jeep

Yes it makes sense. The Exhaust Gas Recirculation valve is on the intake manifold passenger side by the carburetor.

Posted on Mar 18, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Wiring diagrm for egr valve 2009 jeep wrangler 3.8


JK jeep, i have 08 and full docs.
it wires to the PCM, same wire colors
as you can see drawing dont work right in fixya.
they get "crunched" badly"
the EGR is PWM modulated,
first is to clean in. the exhaust path must be good
the EGR must not stick closed or open.
p0405 means the pin on sensor part is stuck low.
tell me in most cases, the valve is stuck closed.
clean it is best first action.



26404471-dlj153dynqe1qkaeryvrbplc-3-0.jpg

26404471-dlj153dynqe1qkaeryvrbplc-3-1.jpg
the monitor pin is at X, this tells the PCM where the EGR moved
per PCM command. (called feedback) yours is hard stuck.
26404471-dlj153dynqe1qkaeryvrbplc-3-3.jpg

Dec 18, 2016 | 2009 Jeep Wrangler

1 Answer

Where is EGR sensor on my 2010 jeep wrangler


which engine? name it by cylinder count and displacement
or by real name.
here ill pretend v6 , 3.8L)
getting EGR errors scanned , are you, and what are they?
see 3.8 engine
on top is this huge metal tube. 25mm? and is top dead center up front.? and goes to the motor driven EGR main valve.
located at right back,behind right of head.and # 5 running.
135 (egr)
246 rear >>>

Feb 19, 2015 | 2010 Jeep Wrangler

1 Answer

Car code p0404


404,
its under warantty the 8 year smog.
this is EGR failure.
and is NOX smog rules. and is in warranty.
all cars .
for 8 years.80k or 15/150k, depend on car.
but whichever first occurs
so if over 80k do say so.
the EGR can fail for many reasons.
carbon blockage ro the $100 valve is bad.
remove valve and clean it.
reset OBD2 and run car, if comes back
the EGR path must be cleaned.
typical.
http://www.jeepsunlimited.com/forums/showthread.php?532082-Federal-Emissions-Warranty-Info-HERE



Feb 07, 2014 | 2010 Jeep Wrangler

1 Answer

How to replace EGR valve in a 3.8 liter Jeep wrangler?


2 bolts and a hose remove egr valve same way on reverse make sure your egr plug plate matches on bottom of new egr to old

Nov 09, 2013 | Cars & Trucks

1 Answer

1989 jeep wrangler, motorcraft 2100 upgrade(carb), runs VERY bad, hesitates upon acceleration etc..ran like the before the new carb only not as bad. What could the problem be?


If you barely push the throttle and it's sputters, try unplugging the EGR valve and see how it runs.Make sure you have vacuum to the EGR valve.Start engine and on the outside see if you can put your finger under the EGR valve and see if it sucks up. Be careful and not let the engine get to hot when you do this test.

Jan 21, 2013 | Cars & Trucks

1 Answer

I am looking for the EGR valve on my 1995 Jeep Wrangler 2.5L four-cylinder. I suspect someone before me removed the factory manifold and put in one that was not controlled by EGR. If I truly don't have...


locate-ford-egr-valve-200x200.jpg EGR Valve TurnDriverSide creativecommons.com jQuery(document).ready(function(){ jQuery('.intro .thumbnail a:first').attr('href','http://i.ehow.com/images/a05/29/ff/locate-ford-egr-valve-800X800.jpg'); }); The EGR, or exhaust gas recirculation valve, takes inert exhaust gasses drawn from the exhaust system and reintroduces them into the combustion chamber through the intake manifold. This process lowers the peak combustion temperature and helps combat the formation of Nitrous Oxide (NOx) in the exhaust.
jQuery('.intro .thumbnail').each(function(i,e){ jQuery(e).find('img').one('error',function(){ jQuery(e).remove(); }); }); Difficulty: Easy Instructions Things You'll Need:
  • Needle-nose pliers
  • Flat-blade screwdriver
  • Phillips Screwdriver
  1. Step 1 Separate the intake ducts from the air cleaner assembly by loosening the retaining clamps and pulling the ducts away from the housing.
  2. Step 2 Disconnect the vacuum line from the air cleaner assembly.
  3. Step 3 Remove the wing nut that secures the air cleaner housing lid to the base.
  4. Step 4 Remove both the air cleaner hosing lid and base.
  5. Step 5 Locate the EGR valve. Look at the front of intake manifold. The EGR valve will be bolted to the intake manifold just in front of the carburetor.
jQuery('.article ol .image').each(function(i,e){ var $this = jQuery(this); $this.find('img').error(function(){ jQuery(this).remove(); $this.remove(); }); });

Jun 02, 2010 | 1997 Jeep Wrangler

2 Answers

I have a 2002 Jeep Wrangler TJ Sport and it misses then it doesn't whats wrong?


start with simple tune up plugs and plug wires and cap and rotor if it still misses check egr valve and exhaust sensors make sure it exhuasting right

Oct 21, 2009 | 2002 Jeep Wrangler

1 Answer

92 Jeep Wrangler will not Stay running.


I had the same prblm with my 1989 Jeep, 6 cyl straight, and it was because of the EGR valve, easy to replace and not too costly. EGR valve is screwed on the motor, driver side, and there is a ±1/2" rubber hose attached. Easy to see if device comes apart, cut by rust.

Mar 18, 2009 | 1992 Jeep Wrangler

1 Answer

1995 jeep wrangler


if no check engine light is on, check the egr valve, sounds to me that it is stuck open or the egr silinoid is bad

Jun 21, 2008 | 1995 Jeep Wrangler

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

83 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

76051 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...