Question about Cars & Trucks

Open Question

Brakes stuck when I started the car(Honda Accord Hybrid 2005), the brake pedal stay firm when you continue applying pressure, after a few minutes if in winter time it takes longer, it seem to step down and work fine. Is anything wrong?

Posted by on


6 Suggested Answers

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

  • 5 Answers

SOURCE: Intermittent Hard Brake pedal

well i had problems with vacuum leaks to the booster and or any vacuum supply or even the intake gaskets if engine vacuum is not stable then you rob if from where you have it like the booster is like a storage for vacuum because it needs to be there for easy application of the brakes

Posted on Jun 07, 2008

  • 330 Answers

SOURCE: Brake pedal goes too far

You have to check your master cylinder, pump your brake several times and hold it, see if is going down to the bottom, if does, the master cylinder is wrong, check the brake pressure hose, maybe you have some air in your brake lines, be sure you have enough brake fluid

Posted on Jul 27, 2008

  • 2 Answers

SOURCE: thumping noise when apply brakes 1990 Accord

yes my cv axles had to be replace cause of the same thing but when you replace one side you need to do the other side at the same time cause when 1 goes bad the other is not that far behind . i know from experience

Posted on Nov 21, 2008

  • 201 Answers

SOURCE: 1993 toyota landcruiser brake problem

sounds like vacuum brake booster diaphram has failed. its behind master cylinder and probably needs replacing.

Posted on May 08, 2009

  • 1392 Answers

SOURCE: car brake lights won t turn off when car is shut down 1996 Honda Odyssey

It should be your brake light switch. There is a little plate welded to the arm of the pedal that has a hole with a rubber stopper. The rubber stopper is most likely missing, or damaged. You should be able to take a flashlight and see the plate and the switch. If the hole is plugged up, you will need the brake light switch, if not, replace the plug.

Posted on Jun 02, 2009

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

I have a brake problem on my 2005 GMC sierra

I need to know if the brake pedal gets tight or does the brakes get tight and slow vehicle down as if brakes are being applied.....If it is just the pedal getting tight and hard you have a vacuum Brake Power booster problem....If the brakes are locking slightly this could be a few different things......NEED MORE INFO..and Mileage....

Apr 01, 2014 | 2005 GMC Sierra 1500 Hybrid

1 Answer

2005 Honda Accord Hybrid brake struck when starter

Sounds like you have a defective brake master cylinder or power booster diaphragm. Any local shop can confirm this for little or no money.

Jan 03, 2014 | Cars & Trucks

2 Answers

1997 chevrolet monte carlo brake problems

Would you care to explain in detail the problems,
& who works on your vehicles & why you have problems

Dec 10, 2012 | 1995 Chevrolet Monte Carlo

2 Answers

Brake lights stay on while car and all other lights are off

Have you checked the brake light switch on the brake pedal ?

Jul 28, 2012 | 1997 Honda Accord

1 Answer

Taking car, 2002 Honda accord, out of park , the shifter will not shift. Brakes are fully applied but the brake lights do not come on

on the brake pedal there is a push button switch alot of times this goes out it will get stuck due to use and quite activating i took mine off and sprayed some "penatrateing lubricant" on it and pushed it in and out a few time and got it working again. althoughn that solution only lasted for about a year and it started acting up again so then i call honda and the part was only like 30 bucks so i replaced it. very easy to replace like tow wires and two bolts and your done...

Aug 14, 2010 | 2002 Honda Accord

1 Answer

1998 Accord: 1998 honda accord sedan break lights stay on...

In all probability, the brake switch got stuck in the closed position. One way to test it is by trying to move the shift lever from Park to Neutral without depressing the brake. If you can do this, then the switch is damaged. It is very simple and inexpensive to replace.It is located a few inches above the brake pedal rubber pad.

May 17, 2010 | 1998 Honda Accord

2 Answers

Installed new brake pads and roters on a 2005 accord. The brakes run very hot and have a smell. not sure if I have a problem

if it is braking normal no drag-shimmy-vibration /ur brakes are seating will smell until pads and rotor settle

Nov 11, 2009 | Honda Accord Cars & Trucks

1 Answer

1994 honda accord brakes are hard to press ABS light is on

It sounds like you might have a bad brake booster. To check it a. pump up the brakes while the vehicle is off.b. while apply pressure to the brake pedal, start the car.c. the pedal should slowly go down about 1 inch after starting the car.

Jul 26, 2009 | Honda Accord Cars & Trucks

3 Answers

Brake lights stay on when car turn off

brake light switch stuck or bad

Feb 03, 2009 | 1999 Nissan Maxima

1 Answer

1990 honda accord

when you step on the brake pedal it energizes a solenoid located next to the shifter (under the console) that disengages a mechanical stop which prevents you from putting the car in gear w/o the brakes applied. Safety First. If that solenoid goes bad you will experience this. The brake pedal switch could come into play here as well but not certain of this. are there any other symtoms such as brake lights don't work?

Jul 26, 2008 | 1990 Honda Accord

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

51 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts


Level 3 Expert

76630 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides