Question about 1996 Ford Taurus
1998 ford taurus 3.0 EFI 6 cyl
You may need a new Vehicle Speed Sensor. It is located on the Transmission on the Passenger side out-put shaft housing.
Posted on Feb 02, 2015
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
do you have a owners manual? this will show the location and the purpose of each fuse and relay. the radio fuse should be red in color and be located in the fuse panel on the drivers side it is a 15 amp and is red in color... hope this helps you...please rate this thanks
Posted on Sep 02, 2008
several things can do this but most likely would be
1 TPS trottle postion sensor = replace
2 stuck butterfly valve inside the trottle body = clean out with trottle body cleaner try to get most of the black build up with a old tooth brush
3 bad trottle cable= feel the cable make sure it moves freely if not replace it
Posted on Feb 28, 2009
gear selector may need adjusted, or a solenoid in the transmission is malfunctioning.best to take to a trans shop and have a diagnostic ran on it.
Posted on May 03, 2009
If this is for the 3.0L Vulcan engine, it's really easy. There are two mounting bolts and a stud nut. The mounting bolts go through the left side of the mounting bracket and through the alternator (it's at the top of the serpentine assembly). You'll have to take the stud not off from the lower intake manifold to remove the second mounting bracket. Make sure you disconnect the negative battery terminal first so that you don't fry anything. You'll also have to remove the nut that attaches the ground to the alternator and remove the wiring harness. The nut is enclosed in a black rubber pocket that protects the connection from moisture. After you've done all this, just pull it up and off the assembly. Installation is the reverse of removal.
Posted on Jun 24, 2009
SOURCE: 89 FORD F-150 ENGINE IS
The TFI module is on the side of the distributor but I would recommend replacing the module and stator witch is inside the distributor..... Have you checked to see if you have voltage to the coil?
Posted on Aug 28, 2010
Testimonial: "THANKS EXACTLY WHAT I NEEDED 4 THUMBS UP"
Tips for a great answer:
Dec 29, 2013 | 1998 Ford Taurus SE
Jun 07, 2012 | 2002 Ford Taurus
Nov 26, 2011 | 1998 Ford Mustang
Feb 25, 2011 | 1998 Ford Taurus
Dec 31, 2009 | 1998 Ford Taurus
Sep 25, 2009 | 1998 Ford Explorer
Apr 10, 2009 | 2001 Ford Taurus
Mar 30, 2009 | 1996 Ford Taurus
Nov 04, 2008 | 1998 Ford Explorer
Sep 18, 2008 | 1999 Ford Taurus
139 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: