Question about 2007 Dodge Caravan

3 Answers

P0733 dodge P0733 code - i took it to one mechanic at goodyear they wanted to due an overhaul of the tranny. I took it to tranny specialist - they told me the pan looks good the fluid is clean - replaced all the filters he mentioned something about the filters were not put on properly allowing air and moisture into teh system - so far no code and the tranny does not skip! is that possibly how could the people at goodyear be so far off?

Posted by Anonymous on

3 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Dodge Master
  • 7,731 Answers

Yes, it is possible that the pump was drawing some air if the filter was not installed properly. I would not ask Goodyear about a transmission problem.

Posted on Jul 12, 2017

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Dodge Master
  • 75,051 Answers

Just like anything else in life ask two people the same question and you will get two different answers most of the time, be glad you got a second opinion, that is always a good idea.

Posted on Jul 12, 2017

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Master:

    An expert who has achieved Level 3.

  • Dodge Master
  • 601 Answers

The techs are Goodyear are trained in tires and brakes. You don't order Lobster at a burger joint and you don't get transmission diagnosis done at a tire shop

Posted on Jul 12, 2017

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 328 Answers

SOURCE: OBD2 DTC P0700 &P0733

P0700 Transmission Control System Malfunction P0733 Gear 3 Incorrect ratio INFO FROM http://autorepair.about.com/cs/troubleshooting/l/bl_obd_7.htm
hope this helps.....good luck!

Posted on Dec 25, 2008

polarcycle
  • 1392 Answers

SOURCE: 98 Intrepid Gone into "Limp Mode"

There are some sensors on the transmission that tend to go bad. You may also need to check the wiring. Could be a computer problem. How many miles?

Posted on Mar 06, 2009

  • 1 Answer

SOURCE: trans in limp mode with codes P0700, P0733 and P0734

1998 dodge caravan code P0700-Transmission Control System (Malfunction Indicator Lamp Request) How do I fix this?

Posted on Nov 17, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My car is a ford ranger 2.5tdci and have A/T . Got error code P0733. And the o/d off light flashes on and off. why?


code p 733 refers to gear 3 ratio incorrect ===causes ---wiring --- TR sensor / switch---shift solenoids ---transmission mechanical fault
take it to an accredited transmission specialist shop for a proper diagnosis but it is not a mechanical problem requirng a new box , but simple sensor , solenoids or electronics problem

Jul 06, 2017 | Ford Cars & Trucks

1 Answer

Does the 99 explorer have a vacuum modulator on the tranny and where would I find the vac hoses off the tranny.


There is no vacuum modulator on your vehicle ! It's controlled by the PCM ,all electronic shift control solenoids ! What DTC'S - diagnostic trouble codes do you have ? P0171 bank 1 lean code ? doesn't mean vac system leak ! could be a vacuum leak but also could be a O2 sensor problem or an intake manifold leak, brake vacuum booster diaphragm leak . What do you mean a slight code of gear three incorrect ratio ? P0733 ? P0733 Gear 3 Incorrect ratio Sorry Jon but you really should take this to a professional !

Jun 08, 2015 | 1999 Ford Explorer

1 Answer

My tranny have error P0733 town&country 2001 after repair automatic transmission


P0733 indicates which gear has a gear ratio that varies from the correct gear ratio, the corresponding in-gear trouble code ranges from DTCs P0731-36.

Without taking apart the transmission and inspecting for damage, it is difficult to say what the exact problem is, but many people who get the P0733 code have fixed the problem by replacing the accumulator in the transmission.

Other possible causes include:
  • ATF level low
  • Deteriorated ATF
  • Shift solenoid B or F malfunction
  • Pressure control solenoid malfunction
  • Line pressure low
  • Low clutch slipping
  • High clutch slipping
  • Control valve malfunction
  • Oil pump malfunction
  • TCM malfunction

Feb 08, 2011 | 2001 Chrysler Town & Country

1 Answer

Trouble shooting d.t.c.p0733


hi this is to do with the 3rd gear sensor switch, the switch is either faulty or the gear itself ( mechanical ) has a problem, data reads : error code p0733 fault location gear 3 incorrect ratio , possible cause: wiring or TR sensor/switch or shift solenoids or transmission mechanical fault hope this helps

Apr 06, 2010 | 2004 Mazda 6

1 Answer

Code p0733, p0717


P0733 Trany Ratio in gear 3. This is a trany fault code and the first thing you should check is your tps sensor using your DVOM meter. Measuring the voltages between idle and WOT (wide open throttle), there should be no interruption in the reading (or glitches). Otherwise, it can play havoc to your shifting cycles which can cause this code P0733. If there are glitches, replace the tps sensor right away and reset the code. If trany is suspected, most common fix for this points to a defective valve body. To verify, it can be done by using a scanner which has the capacity to command the trany solenoids so it can be tested at various trany operating pressures. P0717 is a improper signal from your pules generator A. Which is a the turbine speed sensor on the transmission, You have two of them, the A reads the speed of the input shaft of the transmission and the B sensor reads the output shaft of the transmission. I know with the P0717 it will put the transmission in the limp mode and will not shift past 3rd gear and if your running the transmission hard on third you may have triggered the P0733 which is the 3rd gear slipping. Check the transmission fluid and make sure you have not burnt the fluid, if the transmission fluid is burnt you may want to have a transmission repair shop replace the turbine speed sensor (Pules Generator A) and the fluid and filter. Cross the fingers and hope the transmission was not ran to hard in third causing damage to the third gear clutch packs. Good luck and keep me posted, be glad to help.

Jun 15, 2009 | 2002 Hyundai Accent

1 Answer

Flashing O/D Off Has codes 733 & 741


P0733 Gear 3 Incorrect ratio
P0741 Torque Converter Clutch Circuit Performance or Stuck Off
Based on the experience i have with these codes at the Ford dealer I work at u are going to most likely need a transmission overhaul, it is slipping and the torque converter clutch is defective.

Apr 22, 2009 | 1999 Ford Explorer

1 Answer

98 Intrepid Gone into "Limp Mode"


There are some sensors on the transmission that tend to go bad. You may also need to check the wiring. Could be a computer problem. How many miles?

Mar 06, 2009 | 1999 Dodge Intrepid

1 Answer

OBD2 DTC P0700 &P0733


P0700 Transmission Control System Malfunction P0733 Gear 3 Incorrect ratio INFO FROM http://autorepair.about.com/cs/troubleshooting/l/bl_obd_7.htm
hope this helps.....good luck!

Dec 25, 2008 | 1997 Dodge Intrepid

Not finding what you are looking for?
2007 Dodge Caravan Logo

Related Topics:

29 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

75051 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7726 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...