Question about 2009 Nissan Pathfinder

Open Question

2010 pathfinder clock settings reset after turning engine off

Posted by on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Everytime I start up my 2010 Yukon Denali, the clock on the panel reads 1 hour more? I reset it and the next time that I start it, it changes again.


Weird, are you resetting the clock and finishing the setting as per your manual. Your navigation zone could be throwing it off, make sure you have correct zone for where you are. press the helpful button, and check video link below.

How to Set Clock and Search Area on 2010 and 2011 GMC full size Navigation

How to Set the Clock on GMC Yukon 2007 2013 2008 GMC Yukon Denali 6 2L V8

Jan 25, 2016 | Cars & Trucks

1 Answer

Where is the oil pump on a 2010 nissan pathfinder


Locate the oil Filter on the engine. Inside the engine behind oil filter is the oil pump. Now you know where it is, what do you intend to try to do to the oil pump???

Oct 15, 2014 | 2010 Nissan Pathfinder 4.0

1 Answer

Reset key alarm nissan pathfinder 2010


Take your identification and your ownership details and go to a Nissan dealer. No one should give any details on security system and reset procedures on an open forum. Some thieves can read....

Jul 13, 2014 | 2010 Nissan Pathfinder

2 Answers

2006 Nissan Pathfinder reset maintenance clock after service


From the PCoA (pathfinder club of Australia):
ignition on
as spanner and countdown flashes:
press the odo reset button and hold until new figure flashes
use odo button to set desired figure (1000's)
then wait and its done

Apr 24, 2014 | 2006 Nissan Pathfinder 4.0.V6

1 Answer

Just started today...when I turn off my car the radio stays on. I can turn it off but clock stays on. 2010 Honda civic lx


turn off engine or turn off key. (not the same
if you loose battery power, many things on these unnamed car can reset, PCM./TCM/ radio/clock and immobilzers. etc.
ask a more direct question.
old post

Sep 26, 2013 | Honda Cars & Trucks

1 Answer

Resseting the Clock, I had to cut the battery cables and rewire them, bu i dont know how to reset the clock


Keep pressing the knob that you use to adjust bass, treble, fade, ect, keep going, you will get to clock. Next one after clock is set the clock. Then you have to be quick about it, turn that same knob to increase or decrease the hour, then it will move to minutes and turn till you get the right minutes.
You really have to be quick about it, it took me several times before I got it completed.
if anybody has the 2.5S model 2010 Altima >>> hold the Clock button for 2 seconds, when the words SEEK and TUNE appear, press the Seek button (top LEFT) up or down to change the Hour ... then press the Tune button (top RIGHT) to change the minutes ... press Clock again to end adjustments.

Jul 13, 2011 | 2000 Nissan Altima

1 Answer

How do you set the clock on a 2000 Nissan Pathfinder?


The buttons on the front (h) and (m) should take care of it. If the clock is not displaying anything but the radio and dash lights are OK then it is a dead clock. I offer a repair service and have removal instructions. Drop me a note if you have any questions, I'd be happy to assist.
Check it out: www.autoclockrepair.com

Mar 13, 2011 | 2000 Nissan Pathfinder

2 Answers

I have a 2003 nissan pathfinder. The digital clock keeps fading on and off. Sometimes its lit completely and other times its faded or completely off. What would be the problem?


Intermittent activity is a sign that the clock is dying. This is a very common issue with Pathfinder clocks, unfortunately. They were manufactured pretty poorly. If you want to have it repaired with a lifetime guarantee, please check out www.autoclockrepair.com. All the info is there on how to remove the clock. Drop me a note if you have any questions, thanks!

Jan 25, 2011 | 2001 Nissan Pathfinder

1 Answer

How do I reset the service engine soon indicator of a 2007 nisssan pathfinder


The Service Engine Soon indicator light tells the Service tech that the Pathfinder's ECM detected and Issue with the engine's management system. Your going to have to get the Pathfinder Scanned for DTC codes so you can addressed the issues that is in the ECM's history. Once the issues have been addressed, the Service engine light will reset it self or the service tech can reset it for you. The light will stay on or come back if the issues have not been repaired. Good luck and hope this helps.

Dec 16, 2009 | 2007 Nissan Pathfinder Off Road

Not finding what you are looking for?
2009 Nissan Pathfinder Logo

Related Topics:

92 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

726 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...