Question about 2004 Dodge Durango

1 Answer

Dodge durango po753

Engine light come on and sets code po753. most of the time it will still shift, but not always. i have replaced all solenoids. i tried a trans relay. i tried a pcm and an ignition switch. it only happens at start up. never fails while driving. i can not get the light on by moving wires. lots on this one.

Posted by on

  • 1 more comment 
  • j72burke May 26, 2009

    5.9l engine should say year 2000. po753 for sure....transmission 3-4 shift solenoid circuits.

  • j72burke Jun 14, 2009

    i already did all solenoids. i am also a dodge tech. this has been a tough one. also the problem has gone away now for two weeks or so. maybe a spread pin or bad connection somewhere and now it is good.(for now)

  • mike ryner
    mike ryner May 11, 2010

    There is no code p0753 for the trans could it be p0735 which is gear ratio error in fifth. That is if you have a v8.

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 115 Answers

On your first listing you under 04 durango. But now it makes more sense. On that year truck i have replaced the 3-4 shift solenoid for this code many times. You have to remove the valve body from the trans. The solenoid mounted on the valvebody.

Posted on Jun 14, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2005 mazda 6 PO753 check engine light on and AT on. did repairs changed soleonid a and checked all electrical.reset code . start the engine no lights come on till i put it in gear then the lights on


code p 0735 refers to gear 5--incorrect ratio====causes ---wiring---TR sensor /switch---shift solenoid--transmission mechanical fault
replace the TR switch /sensor

May 02, 2017 | Mazda Cars & Trucks

1 Answer

Dodge 2500 diesel 1999 engine light code PO753 want to know how to conferm problem


The code is for a shift solenoid apparently

Google it

Unless you work on your own veh- then you
need a trans or repair shop

Jan 21, 2013 | 1997 Dodge Ram 1500 Club Cab

1 Answer

Codes po740, po743 ? po753 all at once. Where should i begin for repairs?


You must do the diagnostics for each code.
Here are the possibilitesP0740 DODGE - Torque Converter Clutch Circuitxicon.jpghttp://engine-codes.com/p0740_dodge.htmlForum CodePossible causes- Low transmission fluid level
- Dirty transmission fluid
- Faulty torque converter clutch solenoid valve
- Torque converter clutch solenoid valve harness or connectors
- Torque converter clutch solenoid valve circuit is open or shorted
P0743 DODGE - Torque Converter Clutch Solenoid Circuitxicon.jpghttp://engine-codes.com/p0743_dodge.htmlForum CodePossible causes- Faulty torque converter clutch solenoid valve
- Torque converter clutch solenoid valve harness or connectors
- Torque converter clutch solenoid valve circuit is open or shorted
- Low transmission fluid level
- Dirty transmission fluid

P0753 DODGEP0753 DODGE - 3-4 Shift Solenoid Relayxicon.jpghttp://engine-codes.com/p0753_dodge.htmlForum CodePossible causes- Faulty shift solenoid valve
- Shift solenoid valve harness or connectors
- Shift solenoid valve circuit is open or shorted
- Low transmission fluid level
- Dirty transmission fluid

Jul 03, 2012 | 1997 Dodge Ram 1500 Club Cab

1 Answer

Transmission shift solenoid location


fault code stored in your car, you can go to garage repair it, or get a code scan tool clear it by yourself, Autel MaxiDiag US703 can do your car. hope help.

Jun 27, 2012 | 2004 Dodge Durango

1 Answer

What does the code po753 refer to


Symptom:

P-0753 TRANS 3-4 SHIFT SOLENOID/TRANS RELAY CIRCUITS

When Monitored and Set Condition:

P-0753 TRANS 3-4 SHIFT SOLENOID/TRANS RELAY CIRCUITS

When Monitored: Continuously with the key on.

Set Condition: This code is set if the voltage detected on the 3-4 Shift Solenoid Control

Circuit at the PCM is different than the expected voltage.

POSSIBLE CAUSES

FUSED B(+) FEED TO THE TRANS CONTROL RELAY OPEN

3-4 SOLENOID WIRING HARNESS INTERMITTENT DEF

3-4 SOLENOID WIRING HARNESS OBSERVABLY DEF

SHIFT SOLENOID CONTROL CIRCUIT OPEN

SHIFT SOLENOID CONTROL CIRCUIT SHORT TO GROUND

SOLENOID AND HARNESS DEF (SOLENOID CONTROL CKT)

TRANSMISSION RELAY OUTPUT CIRCUIT OPEN

TRANSMISSION RELAY OUTPUT CIRCUIT SHORTED TO GND

PCM DEF (3-4 SOLENOID/TRANSMISSION)

PCM DEF (TRANS 3-4 SOL/TRANS RLY CKT)

POWERTRAIN CONTROL MODULE DEFECTIVE

POWERTRAIN CONTROL MODULE DEFECTIVE

POWERTRAIN CONTROL MODULE DEFECTIVE

SOLENOID AND HARNESS DEF (SOLENOID PACK CONN)

TEST COMPLETE
TRANSMISSION CONTROL RELAY DEFECTIVE

Feb 03, 2012 | 1999 Dodge Dakota

1 Answer

Coud p0753 durango 1998


DTC P0753 is for the 3-4 shift solenoid in the trans.
This is an electrical code, it will set when the voltage seen by the engine controller on the solenoid's control circuit is incorrect. The solenoid pack gets a constant 12v from the trans relay and is controlled by the engine controller by switching ground.

Since you don't have a code for the TCC solenoid that shares the same relay feed and you don't have a trans relay code set we know the problem is isolated to the solenoid or it's control wire. It could be a short, broken wire, or corrosion in the control wire between the trans and engine controller, but this is almost always the solenoid itself.

This code is not not saying replace parts. They say check it out on yours a code 753 points to a 3-4 shift solenoid relay problem or wiring problem. Other thing to check could be the speed sensor module that screws into the side of the transfer case. back feeding bad info to ECM.

zjlimited_1910.jpg

Hope helps.

Sep 22, 2011 | Dodge Durango Cars & Trucks

2 Answers

ENGINE LIGHT/TRACTION LIGHT ON


Those codes are tied into the transmission and odds are your transmission is not shift properly because it's detected a fault.

P0751- the solenoid should be located under the side cover assembly on the driver's side of the transmission. You may have a short in one of the wires and or a bad connection with the harness. This is probably going to run around $500 and up.

Sep 11, 2009 | 2005 Pontiac Grand Prix

1 Answer

I have the same code po753 will not shift in to o/d


Don't waste your time,the trans is smoked.

Jun 22, 2009 | 2004 Dodge Durango

3 Answers

Transmission code PO753, how to repair?


PO753 code on a Durango can also be caused by a bad transmision relay in the relay -fuse block behind the battery in the engine compartment. (relay # 31 on 1999 Durango) Before you attempt to replace the 3-4 solenoid, or take to a transmission shop, try changing the relay out with another known good relay, reset the code and try it. I learned this today from an honest transmission shop. Shifts normally again, check engine light is out, and the shop did not charge me a dime. Kudos to Trans Medic in Gresham OR.

Mar 26, 2009 | 2000 Dodge Durango

Not finding what you are looking for?
2004 Dodge Durango Logo

909 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

75817 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8180 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...