Question about 2003 Mitsubishi Diamante
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Many times there is several geared motors in the dash the move the air doors around for the ductwork of the heating air conditioner system. Sometimes even with it doing this you can't detect something wrong with the way it works. To find the culprit with the kick covers removed laying in the floor looking up into the heater area reach carefully up into the area that the noise comes from as you turn on the key. touching the clicking part will let you know there the part is conpared to the others and you might get to look at it with the glove box removed. Once you have the best inspefction done look at the dealers parts man pichture of this part in the HVAC system. Have your VIN with you as they make your car different ways on different days. Air door actuater is what I think it is and some of them are pricey. The reason for the failure needs to be found too as the new one may fail quickly if the cause isn't corrected. A scanner connected to the car may find an HVAC or other fault code that may lead you right to the problem. Not always, as somethings effect others and the root cause is somthing slse.
Posted on Aug 12, 2009
ignore it ,its the service is due light not sure of what sequence of knobs to push to put it out on this model.Try turning the side lights on then hold the trip recorder button on and the then turn the ignition on ???it might go out again
Posted on Oct 23, 2009
You're going to lose some coolant, so have a bucket or other container ready. Follow the upper radiator hose to the point where it's connected to the engine. The hose is clamped to a metal housing which is bolted to the engine. Remove the bolts (not the hose) and lift the housing to expose the thermostat (may require a little prying with a screwdriver or similar tool). Note how the old thermostat is fitted (which end is up), lift it out of the engine, and then remove all traces of gasket from the housing and the engine. Install the new thermostat and gasket, replace the bolts, add coolant as necessary, and you're done.
Posted on Jan 04, 2010
bs it is in the back under the seat dont comment if you dont know
remove four screws pop plate off and there it is it took me 25 mins to change fuel pump beat that
Posted on Jan 19, 2010
Tips for a great answer:
Sep 26, 2016 | 2004 Mitsubishi Diamante
Nov 01, 2015 | Ford Expedition Cars & Trucks
Jun 01, 2011 | 2003 Mitsubishi Diamante
Sep 30, 2010 | 2001 Mitsubishi Diamante
May 14, 2010 | 2003 Mitsubishi Diamante
Oct 23, 2009 | 1998 Mitsubishi Diamante
Jun 04, 2008 | 2003 GMC Sierra
35 people viewed this question
Usually answered in minutes!