Question about Tata Indigo

Open Question

Tappet settings on a tata indigo

Tappet settings

Posted by on

Ad

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
emissionwiz
  • 76109 Answers

SOURCE: TATA Truck torque & settings

We have no info on TATA vehicles here at fixya which is located in the USA

Posted on Oct 25, 2012

Ad

SOURCE: test crank sensor in tata indigo

Hi Hussien, Salem, Remove the pick up sensor from its mounting and using an analogue test meter, select the mili voltage range and connect the probes to the two cables. Pass a metal screw driver or similar instrument close enough to the pickup to feel the magnetic pull but without touching it. If it is working correctly there should be a very small movement of the test meter needle. Shalom John

Posted on Dec 14, 2012

8880u81
  • 3103 Answers

SOURCE: MY TATA INDIGO SOME DROPLETS OF OIL IS COMING OUT FROM OIL DIPSTICK PIPE IF I REMOVE DIPSTICK IN ENGINE IS IN START POSITION, WHAT MAY BE THE PROBLEM?

oil pumping out of the dipstick tube? you are getting pressure in the block from compression somewhere..bad rings usually cause this unless the pistons have issues..like tops burned through or broken by busted or stuck valves..

Posted on Dec 09, 2013

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What is the tappet settings on a 1200 toyota corolla 1980 model bakkie


It will be the same as for the 1200 on any other Toyota, i.e. Pulsar etc. If you have 10 thou on the intake and 13 thou on the exhaust set while hot, you are withing range.
We used to say a ticking tappet is a happy tappet, so don't try to eliminate all noise from the tappets, just set them so they don't kill all conversation in the cab.

Apr 03, 2015 | 1980 Toyota Corolla

1 Answer

Tappet settings for 1980 Hino am100


go on the net or contact your local service dealer, but for most diesels that do not hydraulic tappets the setting standard is .012" inlet hot and .014" exhaust hot. Make sure that the setting is required as tappet noise can be from work rocker bushes and shafts

Oct 01, 2014 | Cars & Trucks

1 Answer

Citreon saxo tappet clearance


You didn't mention what year so if the vehicle is early then standard settings are .010"inlet hot and .012" exhaust hot. If late model it will have hydraulic tappets. which are self adjusting

Aug 15, 2014 | Cars & Trucks

1 Answer

How do i set the TAPPETS on a Nissan TD27 2005


tappets cannot be tight and noisy at the same time . Check the rocker and rocker shaft for wear in the shaft and rocker bushes.

Mar 21, 2014 | Cars & Trucks

1 Answer

Tappet settings


can you please give me the tappet settings on a 4HE1T isuzu NQR 500 engine

Jan 09, 2014 | 2003 Renault Kangoo

1 Answer

Scania 144 530 tappet settings.


need guid to set scania engine dc16 45a 1066579 tappets

Feb 12, 2012 | Cars & Trucks

1 Answer

How to measure tappet clearance with dial gauge


When setting tappets, it has to be born inind that the valve stem wears an indentation into the face of the rocker. This prevents a really accurate tappet adjustment, so the customer is right again. If you do not posess a tappet setting dial gauge, a normal engineers dial gauge will do just as well. The procedure is the same as using your feeler gauge except that you set the dial gauge up on the cylinder head with the pointer resting on the head of the rocker. Press down fairly firmly on the rocker valve end and zero the gauge. Next lift up on the rocker and read off the clearance, from the gauge, Use a magnetic base to support your gauge and repeat the pocedure for each valve pair.

Mar 25, 2010 | 1988 Mitsubishi Cargo

3 Answers

Tappet/valve settings???


o.25mm when hot this is for inlet and outlet

Jul 28, 2008 | 1988 Mitsubishi Pickup

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

21 people viewed this question

Ask a Question

Usually answered in minutes!

Top Tata Experts

yadayada
yadayada

Level 3 Expert

76070 Answers

old marine
old marine

Level 3 Expert

1983 Answers

David Harrelson
David Harrelson

Level 3 Expert

5316 Answers

Are you a Tata Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...