Question about Volkswagen Jetta

1 Answer

Jetta converting auto trans to manual

I have everything I need but a good wiring diagram. I'm trying to wire things up but came to a junction box that have connectors in them from engine harness going into the interior under dash . it has the same amount of connectors as the manual engine and trans I'm installing but wire configuration is different along with some of the number of wires in a few of the connectors .I came across a few forums where they used the original auto trans engine harness and computer but since I have all of that from the donor vehicle I thought I'd use it until I got to this point. any suggestions that will help me here I'd surely appreciate it thanks.

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Welcome Back:

    Visited the website for 2 consecutive days.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 14 Answers

You don't mention which series the car is (Mk 2...). I would highly suggest picking up a Bentley manual for the car though. Much better than any other aftermarket book out there. Mine (for Mk 2's) has all the wiring diagrams in the back. They are pricey, but it'll pay you back many times over if you like to wrench your own car.

Posted on Apr 13, 2017

Ad

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
c17hydro
  • 2984 Answers

SOURCE: need wiring diagram at interior connector for installing '91 cher

I have the diagrams for you if you still need them. I need an email address though because I have it as a pdf file.

my email is bomber6509@yahoo.com

Posted on Mar 31, 2009

co7196
  • 3433 Answers

SOURCE: looking for color code (diagram) - 7 wire trailer harness/wiring

If you haven't purchased the plugs yet. The wire color codes should be included in the package.

  • If you are using used plugs ck the back of the plugs for color or function of wire
  • Wht - ground
  • red - stop
  • blue - accessory/aux
  • brown - tail
  • black - Marker
  • grn - left turn
  • yellow - right turn

Posted on May 06, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Wiring diagram how to replace old style GPO telephone junction box ?


This is the GPO junction using both BT (left) and old GPO (right). How far back are you going ? This setup assumes you have the British Telecom wiring at some point. Hope this helps...
26299537-fpbqofzsljgflq1qe0coolvz-3-0.jpg

Oct 03, 2016 | Cars & Trucks

1 Answer

The low beams the windshield wipers rear windshield wipers quit working all the fuses seem to be good everything seems to be proper what's the problem


Well Chuck it depends on the make , model an year vehicle you have ! You would need to look at a wiring diagram to see if these thing's have anything in common . Maybe a electronic control module controls them ! GM vehicles use the BCM - body control module to control these thing's in some vehicles , Ford uses The GEM - generic electronic module or SJB - smart junction box an Chrysler has there modules too ! You can go to www.bbind.com for free wiring diagrams ! click on technical information then TSB'S wiring diagrams ! Good luck

May 14, 2015 | Cars & Trucks

1 Answer

Where would you find all the ground wires


scattered throughout the vehicle. every system and sub system will have several, as well as chassis to motor grounds, and junction box grounds. i recommend purchasing a serve manual they are cheap (10-15 bucks) and will cover all sorts of good stuff, including wiring diagrams

Mar 23, 2012 | 1996 Volkswagen Jetta

1 Answer

Trailer Wiring Harness


The trailer fuses should be located out in the engine compartment inside of the fuse/relay junction box.

That is unless the trailer connector on the vehicle and the wiring were installed by someone who used an after-market trailer connector, and if that is the case then you might find the fuses up under the dash or around the fuse/relay junction box, and the fuses will most likely be inside of in-line fuse holders that are part of the after-market wiring. Here are some diagrams that might help you out.


a8cf21b.jpg

4e5a721.jpg

faeccfc.jpg

409a8fe.jpg

f6cce66.jpg

edbd580.jpg

db39f2b.jpg

229f83d.jpg

5205c1d.jpg

39cae6a.jpg

95c7100.jpg

Jun 04, 2010 | 1999 Dodge Durango

1 Answer

Just converted bmw 735i h reg to manual trans and im having trouble with sorting wiring in car


what wiring do you need to know about...and you may have problems you cant solve there is wiring for things you dont have anymore since you got rid of the auto trans. and the computer in the car needs some of these signals from the trans to run properly

Feb 06, 2010 | 1994 BMW 3 Series

1 Answer

Where can i get a transmission diagram for 2000 VW Jetta GLS


Is this an auto or manual trans? But to just simply answer your question the only one I would recommend is a Bently's factory service manual for your model. A hard copy or in disc format available in ebay and other on line VW stores will carry both. The word diagram in terms of mechanical would be the valve body of an automatic trans which always gives a good workout for your brain trying to learn all them passages in the maze are for.

Sep 21, 2009 | 2000 Volkswagen Jetta TDI

1 Answer

I have a 1992 S-10 swapped from 5 speed manual to automatic


the 2 wires work your backup lights you still have to get power to your lockup converter possible ecm replacement and wiring diagram needed??

Aug 25, 2009 | 1992 Chevrolet S-10

2 Answers

Where is the sound system fuse for a 2002 vw jetta


check your owners manual for the fuse box diagram and if you cant find it then look at a repair manual at your local auto parts store and it will show you the entire wiring diagram.

Jul 26, 2009 | 2002 Volkswagen Jetta TDI

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

27 people viewed this question

Ask a Question

Usually answered in minutes!

Top Volkswagen Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

yadayada
yadayada

Level 3 Expert

76846 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8548 Answers

Are you a Volkswagen Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...