Question about 2007 Hyundai Atos Prime

1 Answer

Engine torque settings and valve clearances

Can anyone help me with a set of torques for engine bolts and nuts as well as valve clearances.I'm doing engine overhaul.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 201 Answers

You need to provide engine model number such as KV3 or such.

Posted on Jun 13, 2014

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

gokulegv
  • 144 Answers

SOURCE: settings and the valve clearances

Valve Setting is usually done only by authorised service center of Hundai, because if you do the setting wrongly it may hurt the car performance. Kindly go to the car service center or you can get the data only by visiting any Hundai service center directly.

Posted on May 08, 2010

  • 632 Answers

SOURCE: What is the torque specs for 2002 Sonata 2.4 dohc valve cover bolts?

Valve cover bolts are in most cases reusable unless rounded off or striped. If the bolts are m6 89in/lbs should be good m8 105 in/lbs.

Posted on Feb 18, 2013

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Cylinder Head bolt torque and tappet settings to suit a , Ford Anglia 1964 105E Engine


Hi valve clearance inlet 0.010 in (0.254 mm). Exhaust 0.017 in (0.432 mm) normal running temperature .. Cylinder head bolts Torque 65 - 70 lb/ft.,.. Cheers

Jan 10, 2017 | Ford Cars & Trucks

1 Answer

How do i find torque settings and clearances


Visit the on-line store, know as reliable-store, they have the repair manuals. I'm sure you will get the solution of your problem.
Best Manuals

Aug 10, 2016 | Cars & Trucks

1 Answer

Need torque settings for mazda xa 3.0l diesel 4 cyl


con rod bolt tension is 55-60ft/lbs
crank shaft main bearings is 80-85 ft/lbs
fly wheel bolts95-100 ft/lbs
crank shaft pulley nut 94-123 ft/lb
head studs tension 80-95 ft/lbs working in a spiral direction from no 1 stud directly in the centre of the head. Pull down in 10ft/lb increment starting at 20 ft/lbs
valve clearance is .010" both valves cold but after warming engine and re-tensioning the head studs re set valves to .012 both valves
injector retaining nuts tension12-17 ft/lbs

Dec 25, 2013 | Saab 9 Cars & Trucks

1 Answer

Torque settingsfor head on lister petter mini6 engine


I have just rebuilt one for our Westerly 21. This is from my Petter 'A' range workshop manual:-
The water cooled engines (AC1W etc.) are:cylinder head nuts: 30NM (22 lbft) except 32.5NM (24 lbft) for the one that also holds the rocker.
Valve clearances are 0.1mm (0.004") COLDReset valve clearance after one hours running since torquing the head.
Retorque head and set valve clearance after initial 20 hours running
I believe Mini-6 refers to the water cooled engines but just in case, the air cooled engines are 27N (20 lbft)

Mar 27, 2012 | Cars & Trucks

1 Answer

Do i torque my rocker arms down on '88 caprice w/307 ? if so what is the torque specs on them


The nut is a self locking nut. so there is no torque spec for them. What you do is set a preliminary clearance with the tappets pumped up, then set final clearance/lash when engine is fired up initially.

The engine is started and allowed to come up to operating temperature- put foil over the hole in the pushrod end of the rocker arm to reduce oil spray, nut is backed out slowly until clatter is heard, and the nut slowly tightened until noise just disappears, then the nut is tightened in 1/4 turn steps until 1 full turn in has been reached. At each 1/4 turn pause, allow engine idle to smooth out before proceeding.

Once all valves are adjusted, you are ready to put the covers back on and finish the rest of the assembly.

For initial set point, when building the engine up, make sure the cam lobe is on the heal (no lift) portion of the cam, and pump up the lifter until significant resistance is felt, and tighten the rocker adjusting nut until you you feel actual resistance to turning the pushrod. move to the next valve.

Jan 09, 2012 | Cars & Trucks

1 Answer

Head torque settings on hc engine


head torque is in 3 parts....
stage1....... 20nm
stage2........40nm
and stage3 .......49 to 59 nm so anywher in middle

valve clearance inlet 0.25mm hot
and outlet 0.33mm hot

hope this helps and if need anymore tech data just let me know and ill try and sort it for you
please leave a comment and a thumbs up.... cheers

Dec 22, 2011 | 1990 Daihatsu Charade

1 Answer

I need the torque specs for a 96 grand cherakee 4.0 motor


Hello, different size, grade, thread size, application will always have something to do the torque specification of bots, nuts, plug etc.


Remember, to get the proper torque specification on bolts, nuts and threaded holes. If these have been used on an engine and it being repaired/overhauled. To get the proper torque spec these items will be need to cleaned inside and out, threads on bolts need to be straightened, and the same for nuts and bolt holes in the engine block, head, timing cover----all bolts, nuts, threaded casting holes all need to be rework to presence condition... Almost new in shape. Now, once this is done you can get the proper torque requirement and to get these spec. all bolts, nuts, threaded holes need to be oiled first. They the torque can be set properly as to the manufactures specifications. Also, there are not set standards for torquing head bolts on a 265 cu/in Chevy and compared to a Ford 265 cu/in engine, they will be totally different.



If you don't the torque spec. go to your local library they have many American Auto Maintenance Manual that will give the all the information that you need. So, just remember all bolts, nuts, machined holes with thread need to cleaned and resized the threads. To torque any bolt will need to oiled--not much.... I hope this helps you and I wish lot of luck. GB...stewbison

Sep 24, 2011 | Jeep Cherokee Cars & Trucks

1 Answer

What is the valve clearance and head bolt torque on a nissan td27 engine 1996 model


valve clearance is .014 inch for intake and exhaust with engine warm.
head torque it 21 ftlbs, then 44 ftlbs, then loosen all, torque to 89 inchlbs, then to 21ftlbs, then mark and turn the bolts an additional 60 to 65 degrees.
cyl head sub bolts torque 80 to 100 inchlbs.
thanks.

Jan 13, 2011 | 1990 Nissan Hardbody King Cab

1 Answer

Escort Mk2 1600 valve and torques settings what are they


cylinder bolt torque settings stage 1 15 ft pounds
stage 2 50 ft pounds
stage 3 85 ft pounds

valve clearences 0.15 - 0.20mm inlet
0.22 - 0.27mm exhaust
these are the figures i have been supplied with, you can also use

cylinder bolts stage 1 10 ft pounds
stage 2 50 ft pounds
stage 3 + 90deg.
with my exp, i would use the first guide as the degree method has a tendancy to snap head bolts, especially on older vehicles.

May 12, 2009 | Ford Escort Cars & Trucks

1 Answer

Differential Torque settings for 2003 Town Car


New cylinder head bolts are required and an angle guage,or you can make one up with card and a set square. Head bolt torque is 25Nm(newton metres)+60degrees + 60deg + 60 deg so it's a four step process.Con.rod bolts(big-end)28Nm,Inlet manifold 28Nm,Exhaust manifold 25Nm, Crank pulley 40Nm,Sump 5Nm and use locking compound (loctite)Timing cover 6Nm. Valve clearance,set inlets to .006" and ehausts to .010"(set approx.when cold then re-adjust while warmed engine is idling.

Feb 20, 2009 | 2003 Lincoln Town Car

Not finding what you are looking for?
2007 Hyundai Atos Prime Logo

424 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

74896 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7688 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...