Question about Cadillac DeVille

Open Question

Neutral safety switch 1991 cadillac deville

Neutral safety switch location

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Saaboheme
  • 76 Answers

SOURCE: 96' saab safety neutral switch

It is under the battery tray. Here is where it is and how to get to it.
Here is another procedural tutorial on how to remove and replace it.
Assuming that this is an automatic, the NSS is a common problem. A common, cheap and easy ten minute bypass method has been developed to get around the problem or at the least to use to confirm the diagnosis of a failed switch.

Posted on Dec 17, 2008

chryslertech
  • 115 Answers

SOURCE: Location of NSS(neutral safety switch) on 2002 Dodge Caravan

It is in side the trans on top of the valve body. Why do you think you need to replace it?

Posted on Mar 03, 2009

  • 1 Answer

SOURCE: 2004 Jeep Grand Chrokee Neutral Safety Switch Location

The switch is on the transmission..It is usually a dealer item but you can get one from Rockauto.com for about 1/4 of what the dealers charge.

Posted on May 25, 2009

emissionwiz
  • 75197 Answers

SOURCE: Neutral Safety Switch Location

on the transmission where the shift cable attaches.

Posted on Jun 15, 2009

ZJLimited
  • 17970 Answers

SOURCE: Looking for the neutral safety switch

Neutral Safety/Back-up Light Switch

This is a combination switch which controls both Neutral Safety and Back-up lamp circuits.

C6 Transmission


8290dff.jpg

C6 neutral start switch

  1. Disconnect the negative battery cable.
  2. Raise and safely support the vehicle on jackstands.
  3. Remove the downshift linkage rod return spring at the low-reverse servo cover.
  4. Coat the outer lever attaching nut with penetrating oil. Remove the nut and lever.
  5. Remove the 2 switch attaching bolts, disconnect the wiring at the connectors and remove the switch.
  6. Installation is the reverse of removal. Adjust the switch and tighten the bolts to 55-75 inch lbs. (6.2-8.5 Nm).
  7. Remove the jackstands and lower the vehicle.
  8. Connect the negative battery cable.
AOD Transmission

e7f4231.jpg

Removing the AOD neutral start switch
  1. Disconnect the negative battery cable.
  2. Raise and safely support the vehicle on jackstands.
  3. Disconnect the wiring from the switch.
  4. Using a deep socket, unscrew the switch.
  5. Installation is the reverse of removal. Tighten the switch to 10 ft. lbs. (14 Nm).
  6. Remove the jackstands and lower the vehicle.
  7. Connect the negative battery cable.
4R70W Transmission

2f68dfc.jpg


Removing the Manual Lever Position (MLP) sensor

As of 1994, the neutral safety switch is referred to as a Manual Lever Position Sensor (MLP).
  1. Disconnect the negative battery cable.
  2. Raise and safely support the vehicle on jackstands.
  3. Disengage the harness connector from the MLP sensor.
  4. Remove the 2 sensor attaching bolts and remove the sensor.
To install:
  1. Install the MLP sensor and install retaining bolts. Do not tighten, the sensor requires adjustment.
  2. Adjust the MLP sensor then tighten attaching screws to 80-100 inch lbs. (9-11 Nm).
  3. Remove the jackstands and lower the vehicle.
  4. Connect the negative battery cable.


ADJUSTMENT

C6 Transmission
  1. Hold the steering column transmission selector lever against the Neutral stop.
  2. Move the sliding block assembly on the neutral switch to the Neutral position and insert a 0.091 in. (2.3mm) gauge pin in the alignment hole on the terminal side of the switch.
  3. Move the switch assembly housing so that the sliding block contacts the actuating pin lever. Secure the switch to the outer tube of the steering column and remove the gauge pin.
  4. Check the operation of the switch. The engine should only start in Neutral and Park .

4R70W Transmission


4cc4151.jpg


Adjusting the MLP sensor

Park is the last detent when the manual control lever is full forward. Return 2 detents toward the output shaft for Neutral.
  1. Position the manual control lever in Neutral .
  2. Insert Gear Position Sensor Adjuster tool T93P-700 10-A or equivalent, into the slots.
  3. Align all 3 slots on the MLP sensor with 3 tabs on the tool.
  4. Tighten the attaching screws to 80-100 inch lbs. (9-11 Nm).

I hope help you. Good luck (rated this help).

Posted on Sep 18, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Where is neutral safety located on 2002 Cadillac deville


It should be located close on on the transmission

Feb 28, 2015 | 2002 Cadillac Deville

1 Answer

Location of neutral safety switch


Should be below shift lever if located between front seats.

If on steering wheel assembly check below ignition switch I will get a diagram and post later

Aug 01, 2014 | 2001 Cadillac DeVille

1 Answer

2002 cadillac deville nutral safty switch location


This switch opens the starter circuit when the transmission is in any gear but Neutral or Park on automatic transmissions.


----------------------------------------------------------------------------
obd2express.co.uk

Dec 13, 2012 | 2002 Cadillac Deville

1 Answer

1991 caddillac coupe deville wont crank with key lights all work just wont engage starter


Could be the key switch, neutral safety switch, starter, or wiring problem.

Jul 15, 2012 | Cadillac Cars & Trucks

1 Answer

Will not turn over or get fuel. Ign switch & safety neutral switch OK.


Hello and Welcome to FixYa.com



So the engine does not crank at all? Or is it that it cranks but does not start?



Thank you for using FixYa.com

Regards, Lee Davidian

Your FixYa Expert

Jan 18, 2011 | 1991 Cadillac DeVille

1 Answer

I have a 1991 Sedan deVille. If I try to start it with the key, it does nothing. All the accessories work with the key in the run position. If I bypas the ignition system, it starts just fine. What could...


So you have no crank no start correct. Three possible items to check : ignition switch,neutral safety switch, starter relay. and if applicable starter interrupt relay.

Aug 23, 2010 | 1991 Cadillac DeVille

1 Answer

Need to know what these codes mean E98 E91 .EE ..E E52 1991cadillac deville


e52 is ecm memory reset
e91 park neutral safety switch
e98 transaxle shift fault

Jul 07, 2010 | 1991 Cadillac DeVille

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

12 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cadillac Experts

yadayada
yadayada

Level 3 Expert

75117 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7772 Answers

Are you a Cadillac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...