Question about Dodge Ram 1500

Open Question

Ignition turns without key - Ram 1500 Dodge Cars & Trucks

Posted by Anonymous on

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

YA MY 97 LUMINA WONT TURN OVER EVERYTHING ELSE WOTKS THO, MY LIL KID HUNG ON MY IGNITION WITH THE KEYS IN AND TURNED TO THE ON POSITION I CAME BACK AND KEYS WERE ON THE FLOOR, COULDNT EVEN PUT KEY IN


How would you get your ignition to turn the engine over without a key?

If the ignition key is damaged or the lock cylinder is damaged and you can't get the key in ignition lock...start there. Is the key broken off in the ignition? Please provide some more information as the description of your problem doesn't make much sense.

Apr 25, 2017 | 1997 Chevrolet Lumina

1 Answer

F150 ignition key


Check grounds

Jan 20, 2014 | Cars & Trucks

1 Answer

2009 Jeep Commander --- Ignition problems. For the past few weeks, roughly 75% of turning the ignition OFF from RUN, the ignition will not release the key. Need to turn ignition on and off (potentially...


Hey Anon, Is this a total electronic key,,(push button start)..if so, its an electrical issue. If its a standard key urn ignition. try some DRY graphite on the key.. it will lubricate the switch without the mess of liquids... put the key in and out several times, put some more dry graphite on the key and repeat.. give this some time to work,, if this does not improve the switch.. its time for a new switch assy,

Jun 24, 2017 | Jeep Commander Cars & Trucks

1 Answer

How I take out my ignition switch without the key.


hi.

the ignition units on all modern cars are designed so they cannot be removed without the key.
you normally need to turn the ignition to position I or II before you can remove the ignition.

without the key, you would normally need to change the steering lock assembly.
also, the key in most new cars has a security chip inside the key itself to confirm the identity of the key itself, and if you replace the key, you would normally need to have the ignition module reprogrammed to accept any new keys.

without a key, you will almost certainly need to get a professional to sort this out.

Apr 11, 2011 | 1996 Ford Thunderbird LX

1 Answer

How do I get ignition out without turning key? Key won't turn.


Are you all the way in Park, if it's an automatic, and have you tried turning the steering wheel while you turn the key? There could be pressure against the lock on the tumbler.

Nov 25, 2009 | 1988 Toyota Camry

2 Answers

How do you reset the oil change warning light on a 2008 Dodge Charger


hello. Here is what you do. Turn ignition to on (without starting car) then depress gas pedal 3 times, turn key off.

Oct 29, 2009 | 2008 Dodge Charger

1 Answer

Redo code for 2007 Pilot key


ok get in the car, close the door, make sure all doors are closed.... put the key in the ignition, turn the key to on but without starting the car (lights on dash light up only) press and release the key lock button, turn key to off, without removeing the key.. turn to on without starting the car (dash lights up only) press and release the key lock button again, turn the ignition off, without removeing the key then turn back on (lights on dash on only without starting the car, press and release the key lock button , turn off the ignition without removeing the key, ..turn on the ignition once more without starting the car , press and release the key lock button and u should hear the door lock cycle ....leave the key in the ignition ... now press the lock button or unlock button on the other remotes one at a time if u have them.....u should hear the lock cycle indicateing all remotes are programmed.... kind of tricky to explain but you will get it, the sequence of turnin the key in the ignition on and off is only done with that one first key,,, remember after the door lock cyles press the lock or unlock button on the other remote fobs if if any...and ur done..may take u a few trys.. let me know how it worked out.

Apr 06, 2009 | 2007 Honda Pilot

2 Answers

My car turns over without the keys in ignition


Did you replace the ignition switch? because if so you may have got the gears a couple of teeth off and your switch is in the crank position all the time no matter what the lock cylinder is pointing at.

Mar 05, 2009 | 2003 Pontiac Grand Am

1 Answer

Key stuck in ignition on 89 plymouth sundance


Without taking the ignition apart, you will really have to do some work, what you might want to do is get in the passenger side, grab the key with a good set of pliers, and get some leverage. If you grab, move the key back and forth while jiggling the wheel, the lock should come loose and the key should slide out. Be careful not to turn the key too far, because then you'll break it off, hope that works.

Feb 18, 2009 | 1989 Plymouth Sundance

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

61 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8210 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...