Question about Ford Cars & Trucks

Open Question

Pedal problems ford falcon au 1 brake pedal shakes when appling the brakes

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 49 Answers

SOURCE: Right side shakes when appling the brakes

Both solutions are correct.  In the future, be careful about driving through standing water (rain runoff).  If the rotors are hot (from normal use) and are then doused with water, they can warp, causing the vibration you feel when applying the brakes.  Warped routers can cause inconsistent braking on one side or the other, which can be dangerous.

Posted on Jan 24, 2009

Ad
  • 4 Answers

SOURCE: When appling brakes on a 2000 Jeep Grand Cherokee, steeing wheel

New revised calipers. and have the new rotors machined right out of the box before installing

Posted on Jul 28, 2009

  • 36 Answers

SOURCE: i feel shaking in brake pedal of my 99 rodeo and squealing

Most likely cause is out of round brake rotors.
They will need to be resurfaced or replaced to correct the pulsation you feel in the pedal.
One other cause I can think of is the ABS (anti lock brake system) is activating due to possibly a bad wheel speed sensor.
You can disconnect the power connector at the ABS control unit and road test the vehicle.
If the pulsation is still there than it is not an ABS problem.

Posted on Oct 18, 2009

  • 100 Answers

SOURCE: My brake lights won't work in my AU Ford Falcon

On vehicles that use a common bulb for signal and brake lights the brake light circuit runs through the signal switch. A problem in the signal switch can cause the brake lights not to function. Also check your Emergency flasher switch. Hope this helps.

Posted on Apr 11, 2010

  • 1 Answer

SOURCE: my ford falcon au 99

Brake pedal switch

Posted on Mar 06, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My brake pedal is sitting too high on my au series 2 just replaced brake booster with a ba v8 brake booster can anyone help me please :


i was wrong no pedal height adjustment ??

AU to BA falcon forum
fordforums com au

repair manual one download allowed only not for resale etc etc
1b118bf5-0c8f-43fa-8cb6-32cb85feafdf.jpg

Oct 17, 2016 | Cars & Trucks

1 Answer

Changing a brake light switch on a 1998 ford falcon


look under the steering wheel, and follow the brake pedal,there should be a switch close close to the firewall

Aug 02, 2014 | 1997 Ford Falcon

1 Answer

How to adjust parking brake on au ford falcon 1999?


ford park brakes are adjusted by a nut in the brake calliper and then self adjust. Get a ford workshop manual and see how it is done as it is a bit complicated

Jul 28, 2014 | 1999 Ford Falcon

1 Answer

When I hold down my brake pedal on my au xr6 ford I hear a hissing sound and when I pump my pedal up with the ignition off then start the car my pedal doesn't move the pedal is very hard when I do eme


Sounds like you have a defective vacuum assist brake booster... Make sure you have a good vacuum supply with the engine running before condemning booster. If vacuum supply is between 17-20" of vacuum at idle and it is properly concreted to booster then the booster is defective

Jul 15, 2014 | 1999 Ford Falcon

1 Answer

When I stomp on my brakes let's say in an emergency the pedal is very hard and the brakes don't realy work at all but if I use them normally they are perfect it's on a ford au xr6 ute


Break booster have a no return valve it is on the booster and there is a hoss from the valve to the intake
1- check the valve
2- check the vacuum hoss
3- clean the hole in the intake ( we're is the hoss engine side)

Jul 14, 2014 | 1999 Ford Falcon

1 Answer

When I stomp on my brakes let's say in an emergency the pedal is very hard and the brakes don't realy work at all but if I use them normally they are perfect it's on a ford au xr6 ute


to test your brake assist is working. stop the motor. Press w few times the brakes, till the pedal feels sturdy. Then while pressing the pedal down firmly, start the engine. When you feel the pedal going down, like feeling "soft" you know the brake assist works. If nothing changes it is defect.

Jul 14, 2014 | 1999 Ford Falcon

1 Answer

Why wont the brake lights shine when pressing the brake pedal but the tail lights are working on the same bulb


test the brake light switch located at the brake pedal, disconect the switch & bridge the wires, turn ignition on if you have lights its a faulty switch (very common on ford falcons) if not check you have power at that plug, if power check the globes cause you could have blown globes as they are twin filiment globes (1 globe but 2 lights tail & brake) & the brake filiments might be blown.

Jun 26, 2012 | Ford Expedition Cars & Trucks

1 Answer

My brake lights won't work in my AU Ford Falcon


On vehicles that use a common bulb for signal and brake lights the brake light circuit runs through the signal switch. A problem in the signal switch can cause the brake lights not to function. Also check your Emergency flasher switch. Hope this helps.

Apr 11, 2010 | Ford F Cars & Trucks

3 Answers

2008 f150 shakes when braking, chaged brakes and


makes no sense other than maybe the anti lock system is messing up

Mar 28, 2010 | 2008 Ford F-150

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

56 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76682 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

fordexpert

Level 3 Expert

5537 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...