Question about Ford Cars & Trucks

Open Question

Ford telstar wiring diagram

Need the wiring diagram for the parking brake in a 94 telstar motor home

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

mick-40
  • 94 Answers

SOURCE: need diagram

Hi pgarrity,hope this helps my friend good luck,this is simplified :)38282e1.jpg

Posted on Nov 11, 2008

  • 4 Answers

SOURCE: ignition wiring

firingorder6a.gif firingorder6.gif 1991-1994 2.9L and 3.0L Engines Firing Order 1-4-2-5-3-6 1995 And Later 3.0L V-6 With DIS Ignition System Firing Order 1-4-2-5-3-6
4.0L Engines Firing Order: 1-4-2-5-3-6 DIS Ignition System

Posted on Nov 23, 2008

blueextc3221
  • 15935 Answers

SOURCE: need diagram of serpentine belt for 94Solution for "need diagram for replacing serpentine belt for 94 ford taurus gl w/3 0 v6 engine and a/c" ford taurus gl w/3.0 v6 engine and a/c

89beac5.gif Thanks for using FixYa - a FixYa rating is appreciated for answering your FREE question.

Posted on May 21, 2009

  • 19 Answers

SOURCE: wiring diagram wiper motor Ford Thunderbird 1995

If the same as on a 93 the wiper motor has two connectors.

Connector A (motor):

wiper switch to motor (high) - dark brown / orange
wiper switch to motor (low) - white
ground - black

Connector B (park switch):

wiper switch to motor (park and return) - red
wiper switch to motor (park return) - black
ground - black

Hope this helps.

Posted on Jun 22, 2009

  • 497 Answers

SOURCE: 1996 rodeo, ABS/Brake warning light on dim, will

Get an OBD reading

Posted on Oct 07, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I need a Wiring Diagram


most motor homes tap into the chassis wiring harness so get a workshop manual of the vehicle and the wiring diagrams will be in there
the basic chassis will be a Ford , chev, mercedies , renault etc so the relevant work shop manual will the year and make as shown on the compliance plate

Oct 26, 2015 | Cars & Trucks

1 Answer

How do I get the rear drums off a 2000 Ford focus. I removed the spindle nut,


2000 Ford Focus Drum Removal ProcedureIf removing the drum to service the rear brakes: (note, do not remove hub retaining nut for this procedure)
1. Raise and support vehicle
2. Release the parking brake
3. Remove wheel and tire
4. Disconnect wheel speed sensor wiring harness from wheel knuckle and floor panel.
5. Remove 4 wheel spindle attaching bolts, then the wheel hub and drum assembly from vehicle.
6. Reverse procedure to install noting the following:
a. Torque wheel spindle retaining nut to 49 ft. lbs.
b. Torque wheel/tire assembly to 94 ft. lbs.
2000 Ford Focus Drum Replacement ProcedureIf replacing the drum and wheel bearing assembly:
1. Raise and support vehicle
2. Release the parking brake
3. Remove wheel and tire
4. Remove center dust cap.
5. Remove hub retaining nut.
6. Remove drum and hub assembly. Ensure wheel speed sensor ring is not damaged when removing drum/hub (if equipped).
7. Reverse procedure to install noting the following:
a. Inspect and clean wheel speed sensor ring if equipped.
b. When tightening hub retaining nut, rotate the hub assembly in counterclockwise direction.
c. Torque hub retaining nut to 173 ft. lbs.
d. Torque wheel/tire assembly to 94 ft. lbs.
e. Adjust parking brakes as necessary.


Jul 05, 2011 | 2000 Ford Focus

1 Answer

There is no parking brake, and "park" does not hold. it is a 1990 cruise air lll on a john deere chassis with a ford 460 engine.


The parking brake is activated by the shift lever. There is no parking paw in the transmission on these John Deere Chassis motor homes. The parking brake is the type that works a brake on the drive shaft. I ran into the same problem and just put a line lock on the brake line.

Sep 01, 2010 | Ford E-350 Super Duty Cars & Trucks

1 Answer

1990 ford telstar tx5 AT 2.2lt fuel injected motor


Is the spark plugs getting spark? Is it getting fuel?

Apr 17, 2010 | 1990 Ford F150

1 Answer

2001 windstar, no dash/brake lights, will not shift out of park?


Do you know what a wiring diagram is and how to use it to pin point places in a electrical circuit to do testing ? How to use a DVOM - digital volt ohm meter ? Those system may have something in common , a ground ! Here is a web site for free wiring diagrams .
http://www.bbbind.com/free_tsb.html Enter vehicle info. year , make , model an engine size . Under system click on transmiission /transaxle , then under subsystem click on shift interlock . Click the search button . Then click the blue link ! The shift interlock system is a safety system that won't allow the gear selector to be moved from park unless the driver is pushing on the brake pedal !


Electric Testing Techniques You Need to Know

How to read an electrical diagram Lesson 1

The Trainer 29 Understanding How Electrical CIrcuits Work and How to Test...

Delphi Training Series Mastering Meters Advanced Electrical Diagnostics



May 14, 2017 | 2001 Ford Windstar

1 Answer

Need diagram of how to replace a fuel pump in a 1996 ford telstar,or where is it located


go to google images type in 1996 ford telstar fuel pump diagram. it will should show you how to hook it up and where it located.it should be in your gas tank

Jan 16, 2010 | Ford Laser Cars & Trucks

1 Answer

Wiring diagram wiper motor Ford Thunderbird 1995


If the same as on a 93 the wiper motor has two connectors.

Connector A (motor):

wiper switch to motor (high) - dark brown / orange
wiper switch to motor (low) - white
ground - black

Connector B (park switch):

wiper switch to motor (park and return) - red
wiper switch to motor (park return) - black
ground - black

Hope this helps.

May 16, 2009 | 1995 Ford Thunderbird

1 Answer

Wiring diagram ford escort for installing nav system and stereo controls


here is some info:http://www.the12volt.com/installbay/stereodetail/845.html

Apr 13, 2009 | Ford Escort Cars & Trucks

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

54 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75807 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22133 Answers

fordexpert

Level 3 Expert

5495 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...