Question about 2004 Dodge Ram 3500 Truck

Open Question

I own a 2004 dodge sprinter van high beam driving lights do not work

I checked all bulbs and fuses ,all lights work except the night time high beam lights , switch for night driving is turned on , temporary high beams work when switch is pulled toward driver,when switch is pushed toward dash for full time high beams at night driving nothing happens

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 328 Answers

SOURCE: 2001 dodge ram high beam indicator stays on

you likely have the wrong bulb in the headlight

Posted on Jan 07, 2009

slfowler29
  • 51 Answers

SOURCE: No high beams, problem is not multifunction switch

Check the headlight switch to make sure that the connections or internal connections aren't corroded. This was a major problem for older fords, so it would be good to check it anyway.

Posted on Mar 26, 2009

  • 42 Answers

SOURCE: left low beam is out on my 2006 dodge ram 1500 4.7

I'd still vote for the bulb being bad. The high and low beams use two different filaments, so unless the bulb is physically broken, it is common for the low beam to be bad whilst the high beam is good.

That's why you see some people driving around with their high beams on -- they don't want to get stopped for a 'light out' citation..

When you take the bulb out to replace it, be sure to look at how it is mounted before removing. You don't want to accidently adjust your headling out of kilter.

good luck

Posted on May 16, 2009

  • 412 Answers

SOURCE: 02 Dodge Caravan one headlight will only work at

i have seen this problem before..sounds like underhood fuseblock is bad..flip unit over and check connections..dealer part..hard to get at a wrecker's here..may not be where your located..

Posted on May 22, 2009

  • 18 Answers

SOURCE: 1995 dodge caravan low beam headlights don't work

look into the actual headlight switch and the wiring and the turn signal switch nand wiring

Posted on Apr 30, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My night time headlights won't turn on. All the other lights including High Beams work.


Have you checked to see if the bulbs are burnt out or if the low beam fuses are Blown?

Apr 09, 2013 | 2003 Dodge Caravan

1 Answer

2004 envoy xuv low beams dont work switched fuses 45 and 46 still nothing any ideas


Other possibilities are; the bulbs themselves, burnt or corroded bulb sockets, or a bad headlight selector switch.

Dec 11, 2011 | 2004 GMC Envoy

2 Answers

Hello, I have a headlight problem on a 2004 chey calvalier. All of my lights work except low beam on drivers side. Fuses on left and right headlights are good. I've switched bulbs as well and nothing...


I would focus on the connections going to that head light for the low beam. I agree, it is not the switch, otherwise other side low beam would not be working. It is most likely bad bulb inlet( if it i separated bulbs for high and low) or it is the connection going to the low beam that operates it. Hope this helps. Don't waste your time on switch, it is not that.

Jun 08, 2011 | 2004 Chevrolet Cavalier

1 Answer

2002 Dodge Caravan headlamps: one works on dim the other works on high beam but not together. Also only one daytime running lamp.


Your van has dual diligent headlamp bulbs, that means each headlight has one bulb that serves as high beam and low beam. What has most likely happened is on one side the low beam filament has burnt out, and on the other side the high beam filiment has burnt out. The daytime running lights are just the high beam filament running on reduced power, so if the high beam doesn't work on one side, that same side will have no daytime running light. Replace both headlamp bulbs with matching, good quality bulbs.

Mar 06, 2011 | 2002 Dodge Grand Caravan

1 Answer

I have a 2005 dodge caravan. the headlights have


On the van you have a high beam fuse and relay. On the low beam you also have a fuse and relay. Check the fuse/relay panel for a blown fuse controlling the low beam lights. If you do not find a blown fuse have some one to turn the key on and turn on the high beam lights> During this time locate the low beam headlight relay and place your finger on top of relay, have the other person to switch from high beam to low beam lights. You should feel a click in the relay when they make the switch from high to low beam. If not replace the relay and the problem should go away. Hope this will help you.

May 28, 2010 | 2005 Dodge Caravan

2 Answers

No drivers side tail lights in 06 dodge sprinter where is the fuse?


If other parking light work in the front or the rear than you don't have a fuse problem.You need to check the wiring to that lamp or you just need a new bulb.

Dec 26, 2009 | 2006 Dodge Sprinter

1 Answer

The low beams don't work, could this be a blown fuse, if so where is the fuse?


if low beams and high beams dont work check the fuse.if only the low beam lights dont work.and bulbs good.i am looking at dimmer switch.

Dec 05, 2009 | 2004 Dodge Caravan

5 Answers

I have no headlights!! parking lights, taillights,and blinkers all work fine. none of my fuses or bulbs are blown


I have a 2004 ram 2500 and all my lights work except for low beams. It is not in the switch, I haver replaced the switch with no change. This is a circuit problem with these dodge pickups. I haven't firgured out what it is but it isn't the switch. and unless the low beams and high beams are fused seperate, it isn't a fuse problem either. i have looked for a fuse and can't even find the fuse for the headlights. Im lost like you!

Jun 15, 2009 | 2001 Dodge Ram 1500 Truck 2WD

1 Answer

Low beam headlights not working on 2004 Pontiac Montana extended


You headlight lamp have a diffuser mechanism which allows it to flip between the hight beam and low beam feature of the bulb. In fact, you high beam will function even if the low beam is not working.

I would recommend the purchase of the new headlight lamp. It would cost you you any where from $15.00 per unit to get a replacement lamp

Dec 26, 2008 | 2004 Pontiac Montana

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

37 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

75807 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22133 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8172 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...