Question about Cars & Trucks

Open Question

Wipers not working

Intermittent wiper not working

Posted by Anonymous on

Ad

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
emissionwiz
  • 76673 Answers

SOURCE: Intermitent Wiper does not work

the most common cause of this is the wiper switch.

Posted on Jan 07, 2009

Ad
  • 22 Answers

SOURCE: 98 camry windshield wiper

You will have to change the swich that control the wiper blades cause sometimes they go bad

Posted on Dec 17, 2008

emissionwiz
  • 76673 Answers

SOURCE: 1994 ford ranger intermittent wiper

replace the wiper speed control module.

Posted on Apr 25, 2009

  • 14 Answers

SOURCE: 93 f250 wipers don't work. Changed wiper motor.

Switch is bad.

B

Posted on Sep 10, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hav n trouble with my intermittent wipers on 1977 ford pu.Work ok first 5 min then they wont go off.Can you help?


No intermittent wipers- wipers will not park after using washer ...

www.ford-trucks.com > ... > 1987 - 1996 F150 & Larger F-Series Trucks
Oct 22, 2006 - I have been having trouble with my intermittent wiper feature and the windshield washer feature and parking of the wipers. For the last two ... Wipers won't turn off......sometimes!
Feb 3, 2014
Intermittent wipers?? (question)
Oct 5, 2011
Intermittent wiper switch
Feb 16, 2010
Intermittent wiper governor bad, need help
Oct 11, 2008
More results from www.ford-trucks.com

Ford Truck Intermittent Wiper Failure

www.misterfixit.com/nowiper.htm
It was a dark and stormy night . . . . actually it was. I had been experiencing someproblems with the intermittent wipers on my '88 F 150 the past week and that ...

Ford Wiper Switch ' eBay


Dec 08, 2015 | Ford Cars & Trucks

1 Answer

Winshield wiper delay intermitent module making noises


The wiper delay is in the steering column. It's a small box about 2 x 2 inches with a wiring harness attached. With the testing procedures I found below, you should be able to figure it out. I found wiper delays on eBay for around $10 to $20. Good luck.

WINDSHIELD WIPERS CHEROKEE, COMANCHE & WAGONEER 1. POWER INPUT Remove circuit breaker. Test battery side of circuit breaker. If battery voltage is not present, repair open to splice. Test across circuit breaker terminals. Tester reading should be zero (0) ohms. If not, replace circuit breaker. 2. GROUND Connector A unplugged. Test terminal G. Tester reading should be zero (0) ohms. If not, repair open to ground. 3. INTERMITTENT WIPERS Ignition switch in ACCY. Remove delay module and plug connectors together from the module. If wiper operate in LO and HI speed modes and mist (washer) is working, if wipers and mist operate, replace intermittent module. If not go to step 4. 4. WIPER/WASHER SWITCH Ignition in RUN, wiper switch position as indicated, back probe switch side of connector A for standard, connector B for intermittent: Test connector terminal E-wiper switch in LO and mist/intermittent. If battery voltage is not present, replace switch. test connector terminal C-wiper switch in HI. If battery voltage is not present, replace switch. Test connector terminal F-wiper switch to OFF. If battery voltage is present until wipers stop and then voltage drops to zero (0), system is working fine. If this does not occur, replace switch. 5. INTERMITTENT WIPERS Connector B unplug. Test across terminal A and D while rotating switch from minimum to maximum delay. If tester reading is not between 0-500 ohms, replace switch. Test across terminal A and G while rotating switch from minimum delay to maximum delay. If tester reading is between 0 and 500 ohms, replace wiper module. If not replace switch. 6. WIPER MOTOR Ignition in ACCY, wiper switch position as indicated, probe connector D. Test connector terminal 1. If resistance is no zero (0) ohms,repair open to ground. Test connector terminal 4-wiper switch in any position. If battery voltage is present, replace motor. if is not repair open from fuse panel. Test connector terminal 2-wiper switch in LO. If battery voltage is present, replace motor. If not , repair open from wiper switch. Test connector terminal 2-wiper switch in HI. If battery voltage is present, replace motor. If not , repair open from wiper switch. Test connector terminal 5-wiper switch OFF with voltmeter connected. If battery voltage is present until wipers stop and then voltage drops to zero, system is OK, replace motor. If not, repair open from wiper switch.

62217_jeep1_1.jpg


62217_jeep2_1.jpg

Found on the web. I hope this helps.
Rich Long

Jan 26, 2014 | Jeep Cars & Trucks

1 Answer

During a recent snowstorm, the weight of the snow was apparently too much for the rear wiper. It stopped mid-stream and is stuck. Simultaneously, the intermittent function of the front wipers also quit. ...


Check fuse no. 11 (10A) in the driver's under dash fuse/relay box. I suspect it is blown. It provides power for the rear wiper, both washers, and the intermittent wiper function for front and rear. It probably blew when your rear wiper got stuck.

Jan 31, 2011 | 2003 Honda Odyssey

2 Answers

Windsheld wipers work intermittently. turn


the wiper motor seems to be defective, test that first

Jul 04, 2010 | 1998 GMC Safari

1 Answer

95 Lincoln town car--intermittent wipers do not work and wipers do not go to park position-- Larry


Sounds like the slip ring in the wiper motor has a strip missing from it,if so you need a new wiper motor,parts for wiper motors are next to impossible to find.

May 09, 2010 | 1995 Lincoln Town Car

1 Answer

Intermittent wipers don?t work properly, 98 dodge van


Mine was the Body Control Module (BCM). Switched it out (needs to be programmed) and everything was fine.

Sep 14, 2017 | 1998 Dodge Grand Caravan

1 Answer

Wipers won't stop wiping.


Sounds like your intermittent wiper circuit is defective. Normally the intermittent feature is engaged by one of the functions on the multi-function switch (usually on the steering column). The circuit of the intermittent wiper periodically activates a relay that closes across the "Wiper On" switch. Your intermittent wiper circuit is likely defective and holding its relay closed (or the relay is stuck closed), thereby keeping the wipers on. Note: The wiper motor has an internal switch that opens when the wipers are in the park position and that is designerd to stop the wipers in the park position. When you turn on the wipers (or the intermittent relay is closed), the motor's internal switch is shunted such that the wiper does not stop at the park point of the cycle.

Apr 27, 2009 | Ford Explorer Cars & Trucks

2 Answers

Wipers do not work in intermittent position. They do work in low and high speeds but do not automatically return to the park position. They stop wherever you turn the switch off.


i belive that your wiper switch has gone out on the intermittent side. this is a very common problem.
I hope this helps you
Thanks
Please leave rating

Apr 21, 2009 | 2000 Isuzu Amigo

1 Answer

Intermittanwipers t inop on renault cleo


try replacing the wiper relay

or could be a faulty wiper intermittent part of the switch

Apr 11, 2017 | 2003 Renault 181

1 Answer

Porsche Boxster Intermittent wiper does not work


possibly a relay the one for intermittent wipers is #16 front under dash relay panel

Jun 13, 2008 | 2003 Porsche Boxster

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

255 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

76649 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...