Question about 2003 Chevrolet Tahoe

Open Question

Oil leaking from housing above oil filter - 2003 Chevrolet Tahoe

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
emissionwiz
  • 76682 Answers

SOURCE: water leak

This may be a freeze plug at the back of the engine, have a pressure test run and have it put on a rack to ID the source of the leak.

Posted on Oct 16, 2008

Ad
  • 740 Answers

SOURCE: Oil leak

If it the oil filter housing it can be changed if its the gasket it cab be changed too, Check and make sure which it is first then we can fix, contact if you need more help and thanks for using FIX YA.

Posted on Mar 20, 2009

dennymulford
  • 1055 Answers

SOURCE: oil leak above starter

iits prob a valve cover gasket leaking and running down

Posted on May 25, 2009

  • 202 Answers

SOURCE: No oil leaks,Changed oil,now have leak

Could be leaking from the oil pressure sending unit. This is not uncommon.

Posted on May 27, 2009

  • 1608 Answers

SOURCE: coolant leak somewhere above oil filter

Depending on what motor you are probably looking at the intake gaskets or a frost plug.Try to use a telescoping mirror and check in the area to get a better look.Hope this helps.Good luck.

Posted on Feb 18, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Oil leaking from above the oil filter


I had this problem on my 06 G6. The oil filter housing gasgket needed to be replaced. The oild filter housing is what the oil filter screws onto, and the housing attaches to the block of the motor, and theres a gasgket inbetween the block and housing. The oil filter housing is held on with three screws, and one is extremely difficult to get to. I also had to remove the belt and unbolt the a/c compressor.

Apr 13, 2014 | 2006 Pontiac G6

1 Answer

There is a leak coming from above the oil filter ......2000 chevy 5.3 truck . do you know what this part is called and how do i fix it?


You're probably talking about a leak from the oil filter housing. If it is leaking you'll need to replace it. Otherwise - check your oil filter and where it mates on the housing and make sure you have a good seal with no extra gasket material stuck in the way.

May 25, 2011 | Chevrolet Chevy Cars & Trucks

3 Answers

What causes the oil filter housing to leak - it is above the filter - we replaced the filter but this is on seam about 1/2 inch above the top of the filter


If there is a spacer between the oil filter and the engine block then you would could have a bad seal on it. If its similar to a Honda there will be to hoses going to the spacer. This spacer is called the oil cooler adapter. If this is it. Take oil filter off and the remove the oil cooler nut if there is enough room you won't need to disconnect cooling lines. Pry the Adapter away from the block with screw driver. remove old seal clean surface with clean rag install new seal. Wipe a little oil around the seal just like you would the oil filter. 'Tighten snug, but don't over tighten. Not sure the correct torque for this. Hope this helps you. This similar problem occurred on my 1995 Honda Odyssey.

Jan 29, 2011 | 1996 Volkswagen Cabrio

1 Answer

Poor out oil from above the oil filter housing.


YOU NEED TO REPLACE OIL FILTER HOUSING TOP SEAL OR FILTER TOP NOT TIGHT ENOUGH CAUSING OIL LEAK.

Jan 09, 2011 | 1997 Volkswagen Jetta

2 Answers

Looks like the oil is leaking out right above the


oil filter screws onto an adapter housing which also has the pressure sending unit on it (above oil filter). This adapter housing bolts to the block with 3 bolts. if oil appears to be leaking from where the adapter housing meets the block (especially at the rear side of engine near bottom), then you need to replace the siamese o-rings between the adapter housing and the block ($12 part at dealer). remove lowest 12mm bolt and loosen top 2 12 mm bolts(top 2 bolts won't come out unless you drop the engine down, but loosening 1 inch is all you need), replace o-rings and retighten bolts. be careful not to get dirt/grit between block and adapter. just finished doing this to son's 95 2.7 v6 which was leaving an 8" puddle of oil after idling for only 1 minute-worked perfect

Feb 24, 2010 | 1995 Honda Accord

2 Answers

1992 chevy siverado pickup 350 engine,I have a oil leak in the side of my motor around the area of the oil filter,but it's not the oil filter and i replaced the valve cover gaskets


you definately should check the oil pressure switch its probobly above or to the side of the oil filter and can make it look as if the filter is leaking,it will be threaded into the engnine itself and will have a connector on the top of it most likely with only 2 wires going to it

Apr 25, 2009 | 1999 Chevrolet Silverado 1500

1 Answer

How to change an o-ring above oil filter and above oil cooler.


take the oil filter off,the fitting that the oil filter screws on take that out your housing will then come off the oil cooler so you can replace the o ring

Dec 31, 2008 | 1999 Volkswagen Passat

2 Answers

Oil leaks from the oil filter adapter


If it is not the suggested gasket that is leaking then it is the oil pressure switch located exactly above the oil filter adapter. The black plastic housing could have developed a crack and oil will ooze downward and drip off the bottom of the adapter. I had this problem and changing the oil pressure switch took care of it.

Dec 17, 2008 | 1993 Honda Accord

1 Answer

How to change an o-ring above oil filter and above oil cooler.


remove the hoses from the top side of the engine first its a lot easier, then replace the seals on the cooler, its not a nice job even on a ramp

Dec 09, 2008 | 1994 Volkswagen Passat

1 Answer

Oil leak


Probably the housing for the filter? Have you tried tightening the bolts on the housing?

Nov 18, 2008 | 2000 Chevrolet Silverado 1500

Not finding what you are looking for?
2003 Chevrolet Tahoe Logo

Related Topics:

12 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76682 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8531 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...