Question about GMC Sierra 1500

Open Question

Reset traction control - Sierra 1500 GMC Cars & Trucks

Posted by Anonymous on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Traction control lights come on dash in Holden Captiva 2010 diesel lack of power


when the traction control is activated , there is a reduction of power from the engine to compensate for that lost traction control
run the fault codes , repair the reason for the traction control light and then reset the computer using a scan tool and the engine power will return

May 13, 2015 | Holden Cars & Trucks

1 Answer

My traction control light came on after installing an Volant cold air intake on my 2006 CADILLAC XLR V HELP ME PLEASE


Most likely the air induction probably needs to be programmed into the ECM. But also you may have jounced a wire that has a connection to traction control and it is setting it off. Otherwise, you may have a standard trAction control problem that has to be addressed in the shop.

Dec 18, 2013 | Cars & Trucks

1 Answer

Engine cuts out after a skid


traction control faulty. You slip and slide, your traction control activates, then here lies your problem.. after your traction control activates, it is creating an electrical short, vacuum leak, etc. look at what your traction control is operating, probably brakes. SO look at the brake booster vacuum lines or connecitons. Hope this at least gives you an idea of where to look. COuld be your traction control module is faulty.

Dec 15, 2013 | 2006 Chevrolet Trailblazer

1 Answer

Transmission relay


The correct method to reset is to use a code reader as disconnecting the battery corrupts the cpu program. Try that and see if it improves.

Aug 13, 2013 | Nissan Maxima Cars & Trucks

2 Answers

Abs, brake and traction control light stay on. how do i reset them


I have a 2001 Cadillac Deville with 105,000 miles. The ABS and Traction Control light stay on. What could be the problem? Could I reset the ABS and Traction Control light?

Jan 09, 2011 | 2001 Cadillac DeVille

1 Answer

Warning lights what do they mean, a triangle with a line in the middle


This is the Traction Control Warning light. Traction control is device added to the engine/gearbox sytem, and is designed to help minimise wheel spins when moving away, particularly on a slippery surface. When the system detects the wheels starting to slip and Traction control starts to cut in this warning light shows.

Traction control cannot do much to help in severe ice or snow though, so you can expect to see this light showing or flashing if the conditions are extreme.

If this light shows when the conditions are not extreme, stopping and restarting the engine will often reset it.

Dec 17, 2009 | 1992 BMW 5 Series

1 Answer

1998 Olds 88, Replaced all the brake lines (because of corosion) I took care to get lines back on anti-lock unit in same position as origonal. Brake light on dash did go out but the ABS and Traction...


you probably push air into the ABS unit when getting your lines replace but the Traction Control light might be on because the system might use the wheel speed sensor on the ABS unit to enable the Traction Control.......

Jul 09, 2009 | 1998 Oldsmobile Eighty Eight

1 Answer

1996 Lincoln Town Car traction control braking front wheels?


Your traction control comes on when it notices either your rear tires slipping or front tires slipping and it counteracts the slip to control the slide. It should be working all 4 brakes though not just the front. There is a traction control sending unit under the dash that should be looked at to make sure that it is sending the Trac Control the right message. If it is reading the slide wrong then it should be replaced. Sometimes then can just reset the computer and all works well other times you need to replace the sensor. I would see if they can reset the computer first then go from there. Pleae rate if satisfied. Thank you

Feb 12, 2009 | 1996 Lincoln Town Car

1 Answer

2001 olds ABS and traction control sensor issue


An ABS sensor DOES affect the traction control system. Traction control uses these sensors to determine if a wheel is losing traction. A bad sensor will cause both the ABS and TRACTION lights to come on.
The CHECK ENGINE light however is going to be a seperate problem.

Jun 08, 2008 | 1999 Mazda Pickup

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

162 people viewed this question

Ask a Question

Usually answered in minutes!

Top GMC Experts

yadayada
yadayada

Level 3 Expert

76673 Answers

Freddy

Level 3 Expert

1311 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...