Question about 2001 Ford Crown Victoria

2 Answers

2006 crown vic. had 3rd trans less than a year, at 45-50 mph car is bucking, shuttering,

Posted by on

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 207 Answers

Check for vacuum leak. Mounting bolts and nuts to throttle body and intake manifold are tight. camshaft lobes are worn. Plugged PCV valve or CCV hose Air filter clogged. Hope that Helps

Posted on Jan 03, 2014

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Welcome Back:

    Visited the website for 2 consecutive days.

  • Contributor
  • 30 Answers

Did anybody replace the transmissions computer with any of the replacements? Im sure they did. And thhe torque converter. See if that has been swapped with the transmissions as well. The torque converter can mess up a trans too.

Posted on Jan 03, 2014

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 33 Answers

SOURCE: Replace horn on 2006 crown vic

I believe once you have mounted the horn and connected the wire you will find that the horn wire was cut at (by) the steering coloum that the siren override was hooked to,you will have reconnect this,I hope this helps you

Posted on Jul 04, 2009

  • 43 Answers

SOURCE: Transmission jerks on 1985 Crown Vic when cold.

Unless you are low on fluid, I suspect you are in need of a rebuild. I have had similar problems before. Any shop will tell you to try a fluid and filter change. It has never brought one of mine back. I would suggest adding fluid to the top of the 'add fluid' area of the dipstick and no more. It can foam if it is to full, causing similar problems as being to low. I would add that if you have to replace the transmission - you need to consider that the car may not be worth the cost.
Good Luck.

Posted on Nov 25, 2010

dttech
  • 4803 Answers

SOURCE: my overdrive light is flashing

If your overdrive light is flashing, it is trying to tell you that there is a transmission failure. You will have to scan your powertrain control module to find out what is wrong.

Posted on Feb 20, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Stalling


first scan for engine code.Codes P0600, P2105, P2107.
throttle body is common problem with ford
second connect fuel pressure gauge and drive
General Specifications
Item Specification Fuel tank capacity 71.9L (19 gal) Fuel Pressure Hot restart 448-482 kPa (65-70 psi) Key ON Engine OFF (KOEO) 140-415 kPa (20-60 psi) Key ON Engine Running (KOER) 170-280 kPa (25-40 psi)

Mar 23, 2014 | 2006 Ford Crown Victoria

3 Answers

2006 crown vic at 45- 55 mph when in OD car shutters, bucking effect


Have had to troubleshoot similar issues - if there are no fault codes - don't rule out Tune up problems like missfiring spark plugs.
When the Transmission Torque Converter is engaged "Lock up" and in OverDrive - every missfire from the engine can be felt.
Let me know if this helps at all
Thank You

Jan 03, 2014 | 2006 Ford Crown Victoria

1 Answer

2006 crown vic police interceptor not going over 40mph


replace fuel pump or see the wiring its!!

Jun 04, 2013 | Cars & Trucks

1 Answer

Jeep grand cherokee will not go in to overdrive


was the computer for that exact year and model ? computers have to be matched to that same model to run the same transmission as in the vehicle example 1999 ford crown vic trans.put in a 2000 crown vic even though the trans. is the same the ccomputer reads trans. is built for 1999 cause of the program in the comp.

Sep 06, 2012 | Jeep Cherokee Cars & Trucks

2 Answers

Transmission jerks on 1985 Crown Vic when cold. Doesn't want to shift, and transmission jerks violently when cold. Also, automatic transmission doesn't like to shift into 3rd gear, unless you exceed 45...


Unless you are low on fluid, I suspect you are in need of a rebuild. I have had similar problems before. Any shop will tell you to try a fluid and filter change. It has never brought one of mine back. I would suggest adding fluid to the top of the 'add fluid' area of the dipstick and no more. It can foam if it is to full, causing similar problems as being to low. I would add that if you have to replace the transmission - you need to consider that the car may not be worth the cost.
Good Luck.

Nov 25, 2010 | 1985 Ford Crown Victoria

1 Answer

2004 Crown Vic tran whines in low gear only, took ...


It's normal on the AOD transmissions. Their first gear uses straight cut gear and thus has the whining noise. Gear 2, 3 and 4 are helical gears and thus quiet.

May 20, 2010 | 2004 Ford Crown Victoria

1 Answer

Need a haynes manual for a 1992 ford crown vic they are 30 bucks new cant afford that


I have one but I need it cause I have a 92 and 97 crown vic. but whatever you need, questions answered or need to be guided through anything just hit me up. jacksonjd0406@yahoo.com

Jan 07, 2010 | Ford Crown Victoria Cars & Trucks

1 Answer

97 Crown Vic transmission issue


Check the transmission linkage cable that runs from the steering column under the dash to the trans under the car. make sure that the cable is not damaged and that all connections are tight.

Jan 05, 2010 | 1997 Ford Crown Victoria

1 Answer

88 crown vic turn signals aren't coming on. high beam will come on but not the indicator light on the dash


it may be turn signal switch or fuse its under the dash with your fuse change it the cost is less than $5.00 bucks try it.

Feb 18, 2009 | 1988 Ford Crown Victoria

1 Answer

Engine cuts out , does not throw a code


I also have a 2001 Crown Vic that developed a problem similar to this. It would lope and buck at around 40-45 MPH. I too changed the plugs, then changed the coil boots. It still missed. So I bought 1ea. new coil. After changing the new coil with three old ones, the missing stopped.

Jun 05, 2008 | 2001 Ford Crown Victoria

Not finding what you are looking for?
2001 Ford Crown Victoria Logo

119 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

fordexpert

Level 3 Expert

5501 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...