Question about 2006 Chevrolet Cobalt
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: change oil soon light
You have to turn the key to the power on position(not started) and press the accelerator pedal to the floor 10 times and then hold it there until the oil light stops flashing.
Posted on Nov 14, 2008
SOURCE: Change oil light.
Turn the ignition to the "ON" position. with the engine NOT running. With the ignition in the "ON" position press the gas pedal down to the floor 3 times within 5 seconds. The light should flash twice. If it doesn't you need to try resetting it again.
Posted on Jan 26, 2009
SOURCE: Sensor light on dashboard
Press the gas pedal up and down 3 times within 5 seconds WITH THE IGNITION ON--ENGINE OFF. May need to be repeated till cleared. Hope this helps
Posted on Apr 28, 2009
Hi to reset the oil life monitor
turn the key on engine off
push the gas pedal to the floor 3 TIMES WITH IN 5 SECONDS
the light will flash then go out
Posted on May 13, 2009
If the engine light is on, then I would have an OBD-II Scanner get the codes out of the computer to see what may be causing this error.
The change oil soon light should be reset after changing the oil.
Posted on Sep 23, 2010
Tips for a great answer:
Nov 17, 2016 | Cars & Trucks
on Dec 07, 2009 | Pontiac Grand Prix Cars & Trucks
Sep 29, 2012 | 1998 Pontiac Grand Prix
Sep 12, 2012 | 2001 Nissan Quest
May 17, 2017 | 2007 Suzuki XL7 AWD
May 23, 2010 | 2009 Mercury Grand Marquis
May 14, 2010 | 1999 Buick LeSabre
Aug 14, 2009 | 2007 Lincoln Town Car Signature Limited...
May 24, 2009 | 2003 GMC Envoy
10 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: