Question about Cars & Trucks

Open Question

1999 ford explorer problems

Where can I get air *** front shock absorber

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

SOURCE: 1999 ford 4x4 explorer trans mission problem

Def the shifter cable. My 94 lincoln wont go into park. The shifter wont alloy it I fixed cable and issue solved. Hope that help

Posted on Oct 17, 2008

shaggyrat
  • 1224 Answers

SOURCE: does a 1999 chrysler 300M use shock absorbers or struts?

if front wheel drive its struts
if rear wheel drive its shocks
this is how you tell them apart

Posted on Dec 06, 2008

  • 4369 Answers

SOURCE: Shock Absorber replacement 2002 Explorer Sport Trac

These are just regular shocks and not struts so they should come out with just common tools. You may need to soak the fasteners in penetrating oil for a while or, use heat tget the fasteners to break loose from the corrosion.

Posted on Jan 21, 2009

michigan man
  • 3533 Answers

SOURCE: rough ride on 1999 ford explorer 4x4 XLT

if it was me i would check the shock mount at the top to make sure they are in good shape and checkout the tires to make sure you do not have a bad one or two and also check the stabilizer bar to make the bushings are not bad

Posted on Feb 28, 2009

bunnydawg
  • 5158 Answers

SOURCE: Installation of Shock Absorbers on 88 Chevy Suburban

a video would be better then words so have a look here ... it's a good reference

http://www.expertvillage.com/video/44908_high-performance-brakes-install-shock.htm

please take a moment to rate this solution thanks

Posted on Apr 14, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Where are suspension airbags located on 1999 ford expedition Eddie Bauer so I can check for leaks?


Front or rear ? Either way rear are on axle just inside leaf springs and the front should be just in from tires going up to inside wheel well .

Nov 18, 2014 | 1999 Ford Expedition

2 Answers

1999 lincoln navigator rear suspension loud bang when going over speed bumps also rear rides higher than front? Compressor is fine all air hoses are fine front air shocks 1 year old rear shocks 1 year old...


Check your rear shocks. On the fender, push with your body going down. Upon releasing, your car should go up and down one time then settle. If it goes beyond or hesitate to move, you have a problem with your shocks. I think you also have a problem with the shock absorber bush. It does not matter if you have a new or old shock absorber. The lifespan of the shocks depends on the way you drive on bumpy roads.

Mar 16, 2014 | Cars & Trucks

1 Answer

Clunking accelerating or turning sharply to the left.


Check the front suspension ball joints and steering joints. Check wheel bearings and adjustment. Check shock absorber mounts for condition . Check steering insert condition and top mount rubbers and bearings if McPherson strut set up.. If you have a steering shock absorber then check it's condition and mounting

Sep 29, 2013 | 1997 Ford Explorer AWD

1 Answer

What is the difference between gas shocks and air shocks


ride height can be adjusted using air shocks by increasing or lowering air pressure.
gas improves the efficiency of any shock absorber

Aug 20, 2010 | 1996 Ford Explorer

1 Answer

Need new struts on rear, Would like to replace with air shocks. Any suggestions on how I would do this?


Shock Absorber -The rear already has air shocks on the 1999 Cadillac Deville: REMOVAL & INSTALLATION Rear
  1. Before servicing the vehicle, refer to the precautions in the beginning of this section.
  2. Remove or disconnect the following:
    • Rear wheel Fig. 1: Exploded view of the rear shock absorber mounting 9300vg06.gif

    • Negative battery cable
    • Shock absorber electrical connector from the rear suspension support, If equipped
  3. Support the lower control arm with a jack to relieve the tension on the shock absorber.
  4. Remove or disconnect the following:
    • Lower shock absorber mounting bolt and nut
    • Upper mounting nut, retainer, and insulator
    • Shock absorber compress by hand and remove through the upper control arm
    To install:
  5. Position the top of the shock absorber with the insulator attached into the suspension support.
  6. Install or connect the following:
    • Upper shock insulator, retainer and nut. Torque the nut to 55 ft. lbs. (74 Nm).
    • Shock absorber lower mounting nut/bolt. Torque the nut to 75 ft. lbs. (102 Nm).
    • Shock absorber electrical connector to the rear suspension support, if equipped
    • Rear wheel
    • Negative battery cable
prev.gif next.gif

Jul 29, 2010 | 1999 Cadillac DeVille

1 Answer

What is the flat rate hours for changing front


They don't have struts they have regular old shock absorbers. $20.00 a piece for shocks should be about the same to install them.

Jul 10, 2010 | 1997 Ford Explorer AWD

1 Answer

Rough ride on 1999 ford explorer 4x4 XLT


if it was me i would check the shock mount at the top to make sure they are in good shape and checkout the tires to make sure you do not have a bad one or two and also check the stabilizer bar to make the bushings are not bad

Feb 27, 2009 | 1999 Ford Explorer

1 Answer

Shocks


rear
5955ba5.gif ------------------------------------------------------------------------------------------

front

Removal
  1. Remove front shock absorber-to-upper shock bracket nut and bolt.
  1. Disconnect the lower end of the front shock absorber bolt and nut from the U-bolt plate.
  1. Compress the front shock absorber and remove.
Installation
  1. Insert front shock absorber into the front shock absorber mounting bracket (18183). Insert bolt and tighten nut to 60-81 Nm (45-60 lb-ft).
  1. Attach the lower end of the front shock absorber to the U-bolt plate by installing the nut and bolt. Tighten to 60-81 Nm (45-60 lb-ft).
---------------------------------------------------------------------------------------------

front


Feb 04, 2009 | 1996 Ford F350 Crew Cab

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

139 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75807 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22133 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...