Question about 2007 BMW 750Li Sedan

Open Question

07 BMW 750 misfire random cylinder - 2007 BMW 750Li Sedan

Posted by Anonymous on


3 Suggested Answers

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

  • 63 Answers

SOURCE: misfire on cylinder 4 & 5. combustion miss with cylinder cutout.

the best way to diagnose a misfire is to move the ignition coils of those cylinders(4 and 5) to different cylinders to see if the misfire will move. you can also move the injectors around and even the spark plugs.(make sure to keep a good record of where you are moving them). if you can't get the misfires to change cylinders. your next step would be to do a compression check on all cylinders. air leaks in the intake system can cause misfires but usually it isn't on the same cylinders all the time

Posted on May 03, 2009

  • 6 Answers

SOURCE: 07 bmw door wont close

its the motorize lock mchanism need new one..

Posted on Mar 11, 2011

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Will a EML light come on on a 2001 BMW 525i if it has a bad fuel filter?

I would assume that if the engine control module monitors the fuel pressure in the injector rail , then yes .

otherwise it will more that likely cause a random misfire in cylinders or even maybe a steady misfire in cylinders. because your fuel pressure is too low.

Nov 08, 2015 | BMW Cars & Trucks

1 Answer

Bmw 750 li bogging? slow to accelerate, in low rpm. exhaust sounds a little choppy

It sounds like you have a cylinder misfire. Could be due to anything from a bad spark plug, ignition coil, to a bad head gasket. As a first step, Get the system scanned by a shop and the OBD will tell you what's failing. Could be a number of other things too, but my guess is a cylinder misfire.

Oct 01, 2013 | BMW Cars & Trucks

2 Answers

1996 328i bmw po 300 code/what's the cause? how do I fix it

there is a code table here: code table
hope it can help u and good luck

Mar 09, 2013 | Cars & Trucks

1 Answer

Car blowing white smoke from the tail pipe

Sounds like water is going in to your engine. Check the dip stick out to see if it's milky.

Dec 04, 2017 | 2003 BMW Z4

2 Answers

Random misfire 1997 bmw 528i

remove and clean the injectors
misfires are more injector problems than wires and plugs

Oct 13, 2017 | 1997 BMW 5 Series

1 Answer

I got several error codes on my 07 Toyota Avalon, codes P0352,P0300 and P0301-P0306. Does any one one know what could be causing it or how to repair it.

Ignition coil B primary or secondary circuit malfunction
Random/multiple cylinder misfire detected
cylinder no.1 misfire detected
cylinder no.6 misfire detected
check you coils and spark plugs
make sure they are in good shape. check you spark plug wires also.

Aug 26, 2010 | 2007 Toyota Avalon

1 Answer

Check Engine Light coming on

get the soft ware up grade. and have the coils checked.

Mar 03, 2010 | 2002 BMW Z3

1 Answer

Has a po303 and a po300 code

P0300 is a random misfire and P0303 is a misfire on cylinder 3. That's where the trouble is. Change your sparkplugs and see if the coil that drives the #3 cylinder has signs of damage. Then reset the code. If it comes back, swap that coil with another, reset the code, and see if the misfire code moves. If it does, the problem is the coil. If it does not, the problem is the plug, wire (if applicable), or ignition driver for the coil.

Nov 18, 2009 | 1997 BMW Z3 Roadster

1 Answer

1996 328i bmw sometimes loses power and won't pass smog test

Ok you will have to have it scanned. It probably has cylinder misfire codes and random cylnder misfires. You could need spark plugs and or coils. The scan will tell you exactly which cylinder is missing. That will cure your problem and remember to change your oil and filter right before you go in for the smog test. Also if the car hasn't been serviced in a while it would be a good idea to replace the air filter and fuel filter.

Dec 25, 2008 | 1997 BMW 318

2 Answers

96 bmw 740il misfire

This is a pretty common problem. I would change your valve cover gaskets. They run around ~ 50 bucks. If they are bad it will leak oil into spark plug well and cause a misfire. Very known on the 740.. Also if tune was not anytime not too long ago id change spark plugs while you at it. Then clear the computer and if you still get misfire on 8 try changing the ignition coil which is right about the cylinder with cylinder ignition coil 5. clear the computer. if you get random misfire and misfire cyclinder 5 after then its your ignition coil. parts store runs around 100 bucks

Dec 22, 2008 | 2005 Hyundai Santa Fe

Not finding what you are looking for?
2007 BMW 750Li Sedan Logo

Related Topics:

87 people viewed this question

Ask a Question

Usually answered in minutes!

Top BMW Experts

Anthony Jones
Anthony Jones

Level 2 Expert

128 Answers


Level 2 Expert

254 Answers


Level 2 Expert

281 Answers

Are you a BMW Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides