Question about 2004 Mitsubishi Montero

1 Answer

Computerized Error Codes 11, 35, 66

My 2004 Mitsubishi Montero Limited was hit in the right front fender & bumper... after the body work, the traction/skid light started coming on ... I had to stop the vehicle and manually turn it off ... a computer analysis identified codes 11 Data Error PCM, 35 R/F WSS Circuit Open and 66 Stering Wheel Sensor Self Diagnosis Problem .. after a computer reset, the light occasionally comes on (low speeds, level dry roads - never wet roads) and I stop & manually turn it off and there is no more problems for a couple of days.. PLEASE HELP IF YOU CAN ...

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Expert
  • 53 Answers

I just looke up your codes and found out that the 2004 mitsubishi owners are to contact the company due to recall problems and solutions and repairs for the owners, your to call MITSUBISHI at 1-800-222-0037 as soon as possible.......they will be able to advise you better for this situation.....good luck...shia

Posted on May 21, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Nesesito codigo para mi radio mitsubishi montero 2001 MR490090


Set-up (Programming) procedure is too much to type in here, and is not practical and it will differ brand-to-brand remote controls. If you wish to get more; check the sites linked here. It has set-up code list & set-up procedure to many popular brand remote controls. The site has general set-up codes to check with TVs and other devices are given, in the order of the 'device's brand name list' in alphabetical order. Set-up code list to many brand remote controls also is given. Pull up older posts. Search the sites by type in the brand name to your device in its search box at the top right part of the display window. It will help you to find the document easily.
http://remotesearch.blogspot.com/
http://electronicshelponline.blogspot.com/
http://electrohelponline.blogspot.com/
Programming Notes
• If your device does not respond to the remote after trying all codes listed or your brand is not listed in the code list, use the Auto Code Search method to program your remote.
• Sometimes the first code that "works" with your device may operate only a few functions of your device. There may be another code in the code list that performs more functions. Try other codes from the code list for more functionality.
This is a trial and error procedure; and quiet time consuming. You might have to check different codes said for your device.
Search the site by type in the "brand name" to your device; in the "Search box at the top right of the display window" to get gathered related posts. ..

Jul 25, 2016 | 2001 Mitsubishi Montero Limited

1 Answer

Rear bumper removal montero sport


No, you don't have to remove any thing from the inside. Inner fender covers have to come off. Then the rest are plastic plugs..

Sep 03, 2015 | Mitsubishi Cars & Trucks

1 Answer

2003 Montero Sport 3.0L, 135K miles. Cold start, idle ok. Once warm, low idle and sounds like it has a miss.


Your going to need a wiring diagram. You have a MAF,MAP, IAT and EGR sensor problem. My guess would be a signal wire or ground is bad. These four sensors are right at the throttle body. The mass air flow sensor and the manifold absolute pressure sensor are one in the same. The intake air sensor is next to it. All are located in the air induction plenum. Between the throttle body and the air filter. The Engine gas recirculation valve/sensor is right behind the throttle body. So check the harness from the air filter/ MAF to the engine harness plug. Look for conduit that is rotted away and/or melted.

Feb 25, 2015 | 2003 Mitsubishi Montero Sport

3 Answers

2001 Mitsubishi Montero Limited. 122k miles.


2003 Mitsubishi Montero Limited. 97k miles. Temp gauge is erratic when actual temp is normal. How do I fix this?

Nov 13, 2009 | 2001 Mitsubishi Montero

1 Answer

2000 Mitsubishi Eclipse body work


By a Haynes or Chilton's manual. It will show all the steps. Take pictures as you go in case a step is missing so you can refer to the pictures for guidance.

Jul 17, 2009 | 2000 Mitsubishi Eclipse

1 Answer

How to change horn on 1998 montero sport


Just changed my horns on my 98 Montero Sport and come to find out it was the horn relay. The horn relay is located near your power steering resivour its a small black square you will see some electrical lines running to it. Give it a couple taps and then try out your horn again. If that dosnt work your horns are located right behind your turn signals on your front bumper, they are circluar 3in and golden colored. You can get dealer ship replacement horns for 30 plus dollars or go to a autozone or advance auto and get aftermarket ones

May 27, 2009 | 1998 Mitsubishi Montero Sport

2 Answers

Chevrolet Cavalier Bumper


Headlight and parking lights are different

97 cavalier:
http://www.vanisletrader.com/images/97-chev-cavalier.jpg

2001 cavalier:
http://media.canadatrader.com/companies/2175/items/Normal/14-1779271186-F2CDEB43.jpg

Only way it would work is to do the 01 conversion by switching the whole doghouse (fenders, hood, bumper, lights, etc.) It can be done though.

Mar 27, 2009 | 2001 Chevrolet Cavalier

3 Answers

Replace front fenders 1999 wrangler


Take off the tyre and remove the plastic inner fender first.

Mar 17, 2009 | 1999 Jeep Wrangler

1 Answer

Replacing the Right Front Fender on a 1999 Mazda 626


Can you remove the wheel well splash shield and get access to the bolts? Body shop techs have a special tool to get into this area.

Here's a 97 Probe whcih was the same as a 626 in 1997:

Fender, Front Removal
  1. On GT models, remove the side sill extension. Refer to Section 01-08 for the removal and installation procedure.
  1. Remove the front fender bolt located in the door jamb opening.


    RH Side Shown, LH Side Similar


    b7b1239.gif

  1. Remove the three upper front fender bolts located on top of the front fender (16005) inside the engine compartment.
  1. Raise and support the vehicle.
  1. Remove the wheel (1007).
  1. Remove one push pin and five front fender splash shield bolts and remove the front fender splash shield (16102).
  1. Remove the upper front fender brace screw.
  1. Remove the inner front fender bolt.
  1. Remove the screw holding the front bumper cover (17D957) to the front fender.
  1. Remove the two lower front fender bolts.
  1. Remove the front fender.
Installation
To install, reverse the removal procedure. Tighten the front fender bolts to 7-9 Nm (61-86 lb-in).

Feb 24, 2009 | 1999 Mazda 626

Not finding what you are looking for?
2004 Mitsubishi Montero Logo

275 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Experts

yadayada
yadayada

Level 3 Expert

76051 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8265 Answers

Are you a Mitsubishi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...