Question about Cars & Trucks

Open Question

My Honda crv ignition switch is turned on but no contact. car won't start

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 958 Answers

SOURCE: 2005 Honda CRV won't start

if the clicking sound is coming from the engine compartment, it is the starter solenoid. let her try it a couple of times. sometimes it would connect and start the car. then she can bring it home.

tnx 4 using fixya,

drcool

Posted on Oct 20, 2008

  • 740 Answers

SOURCE: my 97 honda crv have problems to start when the car is hot

This one of two problems Number one is a Bad distributor or a bad main relay. Good Luck, contact me if you need more assistance

Posted on Dec 15, 2008

keemo68
  • 1263 Answers

SOURCE: 2002 HONDA CRV COLD ANTIFREEZE LEAK

this happens alot on older vehicles most often times because the coolant hose shrink and expand around a fitting. try and tighten all coolant clamps. this often is all it takes to solve the problem. you should also look to see that all seals around heads of engine show no seepage

Posted on Apr 25, 2009

johnjohn2
  • 5763 Answers

SOURCE: replacing cruise control bulb on honda crv 2006

JUST POP SWITCH OUT AND BULB GOES INTO SWITCH USE SMALL SCREW DRIVER TO REMOVE YOU WILL HAVE TO TWIST IT COUNTERCLOCKWISE TO REMOVE, TWIST CLOCKWISE TO INSTALL.

Posted on Apr 21, 2010

  • 4 Answers

SOURCE: 2001 Honda CRV, key stuck

Is the gear in P position?

Posted on Oct 07, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to reset anti-theft system on 2003 Honda CRV-EX?


new switch =new key=problems with the immobiliser operation
have the new key programmed to the ECM at a service dealer and then use a scan tool to reset the system

Jun 07, 2015 | Honda Cars & Trucks

1 Answer

Hi i have a honda crv 1996 and suddenly the speedmeter the clock and km meters aswell as the light in the (P,R,N.D1,D2,D3)letters not working what seems to be problem thanks


There is a recall on the ignition switch on 1997. Contact your deal to see is your 1996 is cover under the recall.

http://www.visualimpressions.ca/switch/ Honda Service Bulletin Faulty Ignition Switches

Jan 14, 2014 | Honda CR-V Cars & Trucks

1 Answer

The battery in my 1998 Honda CRV works fine. Had a problem with the key sticking, now the key turns in the ignition but won't catch to start the car. Not sure what to do


Sounds like the ignition switch is worn out(or the linkage from the lock cylinder to the switch has come loose or something like that)

Oct 08, 2012 | 1999 Honda CR-V

2 Answers

Car won't turn over randomly


When it will not crank, a mechanic would check for voltage at the starter, the clutch safety switch, and the key switch.

Aug 03, 2012 | 2001 Honda CR-V

1 Answer

After engine shampoo, engine won't start on 2001 honda crv


You got ignition system wet, remove the distributor cap and check for water, i bet you will find it wet. you will need to dry it out even by using a hair dryer to dry it out, then try to start it. i would let it run for a while with hood open to allow moisture to flow out from under the hood to avoid other components from getting wet. let me know the out come good day.

Apr 26, 2012 | Honda CRV Cars & Trucks

1 Answer

2001 honda crv I'm driving but can't take key out of ignition in Park could drive but key is stuck won't come out


Sounds like you need a new ignition. If its really stuck you will have to get a replacement key and a new ignition. Usually not to expensive and any competant shop can swap it for you. You also might want to check the neutral safety switch. That is the only switch that has to do with your drive park position.

Jul 15, 2011 | 2001 Honda CR-V

1 Answer

No spark and no rpms showing on tach while cranking over?


when ignition switch is placed on "on", are several lights not lit on the instrument panel. Such as check engine, abs, battery, oil..etc!! All warning lights are to be lit momentarily when the ignition is placed in "on" position. This vehicle may be part of a recall in 2002, which replaces faulty ignition switches. Poor design of internal contacts and excessive power consumption leads to power failure to vital engine components. Typical symtoms include: intermitted stalling, no spark, hard starts. Inspect the ignition switch for dark residue, and replace if necessary!!

May 08, 2010 | 2000 Honda CR-V

1 Answer

My 97 honda crv have problems to start when the car is hot


This one of two problems Number one is a Bad distributor or a bad main relay. Good Luck, contact me if you need more assistance

Dec 15, 2008 | 1997 Honda CR-V

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

19 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...