Question about Cadillac Cars & Trucks

Open Question

Airbag wires under seat - Cadillac Cars & Trucks

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 7 Answers

SOURCE: airbag light 2000 beetle

could be loose connection or bad sensor,must be repaired then code cleared out

Posted on May 26, 2009

Ad
ghost4548
  • 776 Answers

SOURCE: wire is unplugged under driver seat! Wear do I plug it back into

Often there are 'UNUSED' wire harness connectors in various places on vehicles (i.e., heated seats for example when the vehicle didn't come with them). The best solution is to find out what trouble code exists in the SRSCM (Supplemental Restraint System Control Module). There are over 100 different codes/troubles which can turn on the AirBag light. Take the veh in to a Hyundai dealership to find out what code(s) has/have been stored in the SRSCM -- it simply might be a "History" code, like DSAB (Driver's Side Air Bag) Resistance - High - H. Hyundai Dealerships use two different scanning systems - HighScan and GDS. Once you find out which code, you can go to http://www.hmaservice.com/ and register and access all the info you want about your Sonata. CAUTION: Air Bag systems encorporate explosive components - trust the professionals

Posted on May 27, 2009

  • 121 Answers

SOURCE: wire under drivers seat has a split and turning on

you should manage to repair it with male and female connectors, make sure you take the fuse out before you do the work and mane sure it is the air bag wire, then tape wire up with masking tape it should solve your problem

Posted on Jun 06, 2009

dmsr63
  • 2050 Answers

SOURCE: I have a 2001 intrepid, the other day the wifes

I would say yes, You have a "passenger detect" in the seat, and the mutt probably ate through the wiring for it.

Posted on Oct 06, 2010

Testimonial: "Thanks a bunch I'll pull the seat and start splicing."

alicantecoli
  • 22246 Answers

SOURCE: RE Renault Modus; My drivers

no check the wiring under the seat ,unplug the connector and plug it back in again and moke sure thier is no rubbish floating about like empty coke cans and kids toys

Posted on Mar 08, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to disable airbag light on vw polo?


because you have unplugged the connection under the seat it is indicating that the seat belt is not done up
check with a service center for a fix so that you can connect up that wire

Sep 04, 2016 | Cars & Trucks

1 Answer

Airbag light on 2001 sonata, also small modular under pasanger seat broken cover, and under driver seat there is a wonnector that does'nt go anywhere. thank's


First the airbag system can be dangerous to work on and it is usually best to consult a professional since to accidental inflation of an airbag can cause injury, do not cut any wires and disconnect the battery when working on the system.
When the airbag light is on it disables the airbag system inmost vehicles meaning if there is a collision the airbags will not deploy. Some autoparts stores can check codes which is where to start with the warning light on and modular connected check the airbag trouble codes with this information it will be easier to diagnose the system and the cause of your problem. I hope this helps

Feb 11, 2014 | Cars & Trucks

1 Answer

Vw golf mk5 airbag fault wires cut under seat reconnected does it require fault reset


You can reset the Airbag ECU only using VAG or similar diagnostic equipment connected to the data link connector of the car, even you had repaired first fault wires cut under seat! After all faults erasing from the Airbag ECU the airbag warning light will turn OFF.

May 23, 2011 | 2007 Volkswagen Golf

1 Answer

My airbag light is on but my airbag is not deployed, what could be the problem? thanks......


Hi
Try under drivers/pass seat the wire cuppling is attached to the under seat of one of them and can prise loose with adjusting seat.
tc

Oct 02, 2010 | 2004 Honda Civic

1 Answer

Service airbag light on


Without checking the fault code there are 2 things that commonly give this, firstly check if there is any new scraping or light grinding noise from behind the steering wheel(there is a coiled wire that carries the connections to the wheel controls and airbag, if it fails the wires usually rub), the other common problem is the plugs under the seats, the computer checks to see if the seat is occupied and the belt is fastened, the wiring goes under the seat to the seat frame, put your hand under and check the connections ar home fully, wiggle the plug and socket (this needs both hands, akward to get them both under the seat)

Nov 29, 2009 | 2006 Chevrolet Malibu

1 Answer

A4 cabriolet airbag light


just give the wires under the seat a wiggle and see if goes out ,fairl common problem this on a lot of cars

Aug 14, 2009 | Audi Cabriolet Cars & Trucks

1 Answer

The airbag light in dash staying on in my 2004


Under driver and passenger seats are wires that go to seat belt anchors.These are tensioner wires.Unplug the wires from the plug under the seat.clean and replace.Doing this while the ignition is turned off.Then turn ignition back on.In 90% of the time this is your problem.Constant movement of seat causes this or rear passengers kicking plugs off.Good luck phil.

Jul 10, 2009 | 2002 Kia Optima

2 Answers

Air bag light on golf 1.4 petrolwant go ou t


When the airbag light is on it means a fault has occurred in the system and the airbag diagnostic monitor has disabled the system, the most common problem that turns the light on is a break in the connection to the steering wheel mounted airbag, this is due to a rotating ribbon contact that breaks under the steering wheel that connects the airbag to the wiring harness and the diagnostic monitor, the part is called th clock spring contact, a coiled up ribbon electrical contact that turns with the wheel

Jun 07, 2009 | 2001 Volkswagen Golf

2 Answers

The airbag light came on and stayed on for no reason.


I have the same issue (which comes and goes often).
It is caused by a loose wire connection, used for the drivers side airbag located in the seat.. The connector for mine is located under the front drivers seat. There are a couple of connectors that are connected to a bar under the front of the seat. I don't recall which one is used for the Airbag sensor.

Feb 15, 2009 | 2000 Chevrolet Impala

4 Answers

Airbag light


i found it at last. there was a loose wire under the driver seat. as simple as such.

Jan 12, 2009 | 1999 BMW 323 Series

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

50 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cadillac Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6918 Answers

Are you a Cadillac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...