Question about 1988 Oldsmobile Ninety Eight

2 Answers

Motor mount, front right, solid or hydraulic?

Hi I know i need a new right front motor mount but I want to know which I need a solid one or a hydraulic one.

Posted by on

  • 1 more comment 
  • yadayada
    yadayada May 11, 2010

    whatever the parts book calls for, why do u ask souch an obvious question, the factory mount is not hydraulic, remember mounte should always be replaced in pairs.

  • Anonymous Mar 29, 2014

    front right

  • Anonymous Mar 29, 2014

    how to replace front right mount

×

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,623 Answers

Hello wrygrl...The OEM (orginal equipment) passenger side motor mount for the 1988 olds ninety-eight was a hydraulic type. After market "solid" type mounts are available for replacement...either type will work. Shop around and get some price quotes, i believe westar makes a solid type mount that sells for around 22 bucks.
Hope this answers your question. Have a safe and happy memorial day weekend.

Posted on May 21, 2009

  • Mr BrokRench
    Mr BrokRench May 21, 2009

    Hey WizzBoy...take a chill pill and stop being so rude to the public in here. Not everybody can be as BRILLIANT as YOU.
    Obviously Wizzy you are not familar with how a transverse engine mounts into the vehicle or how the transmission works as a support mount...replaced in pairs? LOL Since When? The Olds has 3 mounts...ummm now which "pair" should i change...the 2 on the left or the 1 on the right? LOL :D

×

Ad
  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 3 Answers

Solid one works just fine,
have tryed both with no diffrents.

Posted on Sep 13, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to replace motor mounts on 2003 hyundai sonata


You really need the car on a lift or tall jack stands to do this. You will need a full set of hand tools, a good hydraulic floor jack, a set of Jack stands (AKA Safety Stands) and a 1.5 Ton bottle jack. Raise the front of the car as high as possible and unbolt the old mounts from the engine and engine cradle, then Carefully using the bottle jack (put a piece of wood on the plunger of the jack to avoid damage to the oil pan) raise the engine off the mounts and remove them, and reverse install new mounts, time about 2-3 hours to do the repair.

Oct 12, 2016 | Hyundai Motor 2003 Sonata

2 Answers

My front of my car vibrates like crazy everytime I accelerate and turn right but when I let off the has it stops


Sounds like maybe a busted motor mount or transmission mount, or a worn out cv drive axle.Look under the front of the car at the drive axles there is 4 rubber boots 2 on each axle inner boot and outer boot.See if one or more of the boots is torn or split.

Jan 20, 2013 | Cars & Trucks

1 Answer

How to change motor mount


if you don't have an engine hoist you'll need a couple of hydraulic jacks. loosen the bolt that bolt the engine to the mounts. then raise the engine with the hydraulic jacks. once you have just enough clearance to get your hands and tools into the bad mount remove it. put in the new one. slowly lower the engine back into place with your hydraulic jacks and tighten then engine back down to the motor mount. be careful the engine doesn't shift while it's suspended on the jacks one it's dangerous and 2 it will make it harder to realign the engine when your lowering it back onto the mounts

Jul 16, 2012 | 2002 Chevrolet TrailBlazer

1 Answer

HOW TOO REPLACE THE MOTOR MOUNTS DRIVERSIDE


jack front car up set on stands chock wheels for safety with hydraulic jack 2.5 tons or more and apiece of ply wood jack motor up so that you won't damage oil,pan you gonna take pressure of motor on ***** unscrew bolt take motor ***** out replace with new one good luck any problem you know where to find me

Feb 25, 2011 | Lincoln Town Car Cars & Trucks

1 Answer

How to replace a front motor mount on a 1993 Mercury Sable 3.0 V6


To change the right front motor mount on a mercury sable. 1. you will need a jack and 22mm and a 5/8 socket.
2. you want to place the jack under the catalyst converter or somewhere on the motor that will lift the motor separatly from the crossbar that the front mount is attached to.
3. apply a little lift to the jack raising the car(3 or 4 hydraulics jack lifts).
4. using the 22 mm socket wrench take the bottom nut off the mount which is located under the right side of the crossbar.
5. using the 5/8 socket remove the top bolt that attaches the mount to the motor.
6. raise the jack 2 or 3 more times( giving you more room to move the old mount out).
7 . remove the old mount paying close attention to the way it is positioned, being sure not to put the new mount in wrong.
8. apply the new mount.
9. apply the top bolt and tighten .
10. lower the jack until the mount is seated correctly onto crossbar.
11. apply bottom nut and tighten.
12. glad i could help!

Nov 03, 2009 | 1993 Mercury Sable

2 Answers

I need to replace the motor mount thats on the passenger side,abd you access the main bolt thru the wheel well,it's a 2005 2.0,do you know what they call that motor mount


hello. you have 5 mounts front left side, front right side, lower strut rear of engine,upper strut right side and transaxle rear left side

Sep 14, 2009 | 2005 Dodge Neon

1 Answer

2005 dodge neon sxt how many motor mounts


Hi I'm litoshop on your vehicle you have 5 mounts front left side, front right side, lower strut rear of engine,upper strut right side and transaxle rear left side good luck if this information has been helpful please let use know thank you

Aug 17, 2009 | 2005 Dodge Neon

1 Answer

How many motor mounts does 1991 Toyota Camary have?


one up front next to radiator one left side rear of engine. sometimes there a dog bone style on left side of strut tower. then the transmission mount on drive lower frame. have to make sure if its a hydraulic mount or not for the engine ask your autoparts store the will let you know as well. don't remember if that year had those or not

Apr 08, 2009 | 1991 Toyota Camry

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

391 people viewed this question

Ask a Question

Usually answered in minutes!

Top Oldsmobile Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8548 Answers

Are you an Oldsmobile Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...