Question about 1999 Pontiac Grand Am GT

1 Answer

Brake light, Driver Side, will not come on.

The brake light portion of the drivers side rear lights do not work. The bulbs are good and the reverse and directional lights work great. Any thoughts? Before i go and buy a replacment light, does anyone know where and if the failure point can be fixed? maybe a loose connection?


Thank you

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 79 Answers

Hello, I would first check your fuses to your lights first. Then I would press on the brake and have some one check and see if the brake lights come on. If not it is a possible brake light switch and this will probaly need to be replaced. I would check for loose connections on this and check the connections to your back lights as well. The brake light switch is connected to the top of your brake pedal assembly. If these are not the problems it is a possible short in your tailight assembly. I hope this solves your problem for you!

Posted on May 22, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Why did driver side brake light and back up lights quit?


Trevor if the driver side brake light is out, the bulb should be changed, this may be why blinking fast, as well as reverse lights check fuse,bulb and bulb sockets.

Mar 24, 2016 | Cars & Trucks

1 Answer

1984 GMC G3500 has multiple lighting issues... Headlamp high beams work, low beams do not ( brand new bulbs and interior switch ) Passenger reverse lamp inop... Driver side rear blinker/brake light stuck...


seems you have several different problems. High beam working and no low beams=dimmer switch is bad. Reverse lamp not working=bulb socket bad,wiring broke,bad ground at back
Brake light on drivers side stuck on=brake light switch

Nov 18, 2017 | GMC Jimmy Cars & Trucks

1 Answer

To clarify my post, driver side rear brake light does not work when braking. Need help


Easy, jus replace the bulb. No more than $20 and it should b an easy on n off wit little to no tools. But first have someone look at the lights or u and with the key in the on position engine off and lights on, does everything light up? If yes good. Then have have the person or yourself step on the brakes and if the passenger side brake light do light up and obviously not ur driver side then its and easy bulb replacement.

Jan 23, 2013 | 2007 Toyota Corolla

1 Answer

Weird tail light problem


HI Matt,
Your issue sounds like a fault, most likely in the rear lights. Current is feeding from the brake light circuit, into the running light circuit. The most common causes are a bulb filament broken and touching the running light circuit, and loss of ground.
observe the rear lights closely and you should get a clue as to which light is failing....but if not, just pick one....
I would run a temporary ground and test again, if no results, pull the brake light bulbs...
Transient current is often difficult to wrap your mind around, until you understand what can happen.
Doc

Mar 08, 2012 | 2006 Jeep Grand Cherokee

1 Answer

Rear parking lite on dvrs side wont come on only when brakes applied


lopen your tail light assy... check/replace bulbs common problems bulbs filament grounded if you have a tester, test brake light and reverse bulbs on driver side only.... if not check for lose groundline on wire of reverse light... if you have a lose ground on reverse line, the reverse light only lits up when braking becoz it shares the ground line on brake...

Nov 22, 2010 | 1995 Cadillac Eldorado

2 Answers

Driver side brake light doesnt work but other brake light does changed bulbs still does not work


Make sure the fuses are good.There is a fuse for left and right brake lights.The fuse blocks are under the hood and there`s also one under the drivers side rear seat.If the fuses are good then remove the rear lamp assembly and check the bulb.I believe there are 2 screws and then just pull lamp assembly out.Hope this helps.Good luck.

Apr 04, 2010 | 2002 Chevrolet TrailBlazer

2 Answers

2003 Toyota Highlander.The brake light on the passenger side is not working. New bulbs, driver side and center brake lights work. Tail lights left and right work. ???


Replace the right rear brake lamp. The bulb possible use two filaments one for brake and tail light. One burnt out filament in one bulb.

Nov 30, 2009 | 2003 Toyota Highlander

1 Answer

Brake Lights and Reverse Light on driver's side not working


Look for a missing / poor ground connection on the drivers side lamps.

Sep 24, 2009 | 1994 BMW 3 Series

Not finding what you are looking for?
1999 Pontiac Grand Am GT Logo

157 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pontiac Experts

yadayada
yadayada

Level 3 Expert

79865 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8836 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...