Question about 1994 Toyota Camry

Open Question

When you start the car the 30amp fuse in engine fuse box blown the starter turn but the car not starting

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

emissionwiz
  • 75235 Answers

SOURCE: 89 celica turns over but wont start

No fuel pressure no start, check it.

Posted on Nov 12, 2008

  • 163 Answers

SOURCE: 1998 camry: cooked accessory fuse block harness

Look to see if you main box has a leg that feeds the one thats out. Trace that all the way back to the main box with a meter. Hope this gives you some sort of direction.

Posted on May 12, 2009

  • 1 Answer

SOURCE: 93 corolla 1.8 No start Blown ignition fuse

I had a prolem like this one time a while back. what i did was got the wiring diagram and checked everything that was running through that 30 amp fuse. on the one i was working on it ended up being an injector wire pinched under the valve cover and it didnt short out till the car was driven til it warmed up and expanded after the valve cover gasket was changed. hope this helps!

Posted on Jun 27, 2009

  • 427 Answers

SOURCE: I have a 1995 Toyota Corona 2000cc.Whenever i try

ignition or starter probable starter sylanoid

Posted on Mar 17, 2010

  • 14036 Answers

SOURCE: Keeps blowing starter fuse when you turn the key to start engine.

YOU GOT A IGNITION WIRE TO STARTER SHORTING TO GROUND.

Posted on May 06, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Have a 1999 Dodge Avenger V6. Keeps blowing Engine Fuse under hood


Fusible link 3 feeds the PCM. the ASD relay, and fuel pump relay. Assuming it has A/T, that fusible link also feeds the starter relay, the EATX-ECM, and the EATX relay. A short in any of those elements could be causing the trouble.

Dec 16, 2016 | 1999 Dodge Avenger

1 Answer

06 plate citroen c2 wont start


If you check your engine fuse box and find that your 20amp fuse is blown its either a sticking starter relay or water getting in your electrics. Try checking this first as the fuse box is directly above wheel arch and can get damp. Clean up green contacts and keep a spare 20amp fuse handy. After changing this blown fuse you will need to reset the engine management system by disengaging the battery terminal. You're clocks might be out but car will now start. Don't forget to buy that starter relay if problem persists.

Apr 12, 2012 | Citroen C2 Cars & Trucks

1 Answer

Problems starting turnig but not turning over


this may help diagnose your problem. with headlights on,try to start truck.do headlights dim? if so,check battery for bad.try boosting your truck from another car. check battery terminals for clean and tight. this is a must!!! if battery is good,,,,lights ,,headlights on and turning the keyswitch to start and no dim in the headlights when you turn the switch to start,bad connection to battery,or bad starter,or blown fuseable link in wiring to the starter,check for blown fuses to main,starter,e.c.m. under the hood in main fuse box. also check for a bad fuel pump relay in the main fuse box under the hood.

Sep 17, 2011 | 2001 Chevrolet S-10

1 Answer

ON my 95 ford taurus the E.E.C. 30amp fuse blows every time I put a new one in it and then turn the ignition on to start it.


This means you have a dead short, you will need to look around engine area for bad wiring or component, you will need to start disconnecting components under the hood in the engine like injectors o2 sensors alternator , my first test would be to disconnect the small wire to the starter and leave the big one one for now and see if the fuse dtill blows, i have found this to happen when the starter is shorting out inside, if you turn the key and the fuse doesnt blow then replace the starter, remember the small wire on the starter. good day.

Aug 17, 2011 | Ford Taurus Cars & Trucks

1 Answer

All of a sudden my car won't start. The battery is good, lights work It's not clicking like it's trying to start. The engine is okay, the starter usually makes that horrible waahh whiney sound...


it can actually be your starter. many times a bad starter just wont turn at all. it can be that, a short, or the only other thing i can think of would be a blown starter fuse. you can check your fuse box in the engine compartment, it should be like a 50 to 80 amp fuse thats in a little clear box in the fuse section of your fuse compartment. hope this helps. and if fuse is good, you can try poking the starter with a stick and try to start. if it does something after poking it, then its the starter

May 13, 2011 | 1994 Toyota Corolla

1 Answer

30amp aux fuse blown 20 amp brake/hazz and 20amp turn blown 30amp brake blown i'm thinking bare spot in wireing someware what do you think?


that is a lot of blown fuses, start with grounds engine to batt and engine to body, then battery main to starter, i have a suspicion that when you crank the truck the voltage is being routed into the body and light circuits

Nov 10, 2010 | 1997 GMC Sierra

3 Answers

It wont turn over battery OK what could be wrong? starter or fuel pump


If it will turn over, and not start, you are missing either fuel or spark...Those need to be checked. (No fuel doesn't automatically mean bad fuel pump, as injectors need to "fire" the fuel.)
If it won't turn over, or clicks, and your battery is good, it might be the starter motor.

Aug 19, 2010 | 2000 Dodge Durango

1 Answer

Fuses keep blowing


need to see if u have a short a wire must be toching the car somwhere wire must have a cut in it

Oct 05, 2009 | 2002 Saturn Sl

4 Answers

2006 Jeep Wrangler won't start


First, make sure you can turn the engine by hand. If you can't then the starter can't turn it either. Have someone else turn the key and look for the source of the click...may be a relay. Go over the starting circuit with a volt meter. Check for power at the starter main terminal and then with the key turned to "start" check for power at the trigger terminal on the starter. Check battery voltage and check relay operation.
You have a neutral safety switch on the transmission if its an automatic and a clutch switch if it's a stick. Check them as well. Make sure battery grounding on fender and block are also clean and secure.

Oct 01, 2009 | 2006 Jeep Wrangler

1 Answer

Blowing 30amp ignition fuse.


first check the wires connected to the battery for missed alignment. then change the fuse to 30 above amp.

May 28, 2009 | 1995 Nissan 200SX

Not finding what you are looking for?
1994 Toyota Camry Logo

Related Topics:

10 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

75197 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7782 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...