Question about 1996 Hyundai Sonata

Open Question

Torque converter of my sonata automatic transmission has to be changed and the same i could not find in indian market.please tell me from where i can get it and what will be its approximate cost

The torque converter is faulty and i am not able to find the same in indian market. pls tell me from where i can get it and how much it costs.

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Molson02536
  • 3854 Answers

SOURCE: bad catalytic converter?

Log onto www.partstrain.com. I believe they have Catalytic converters for your pathfinder for under $200.00, there OEM direct fit which means no cutting other then removing the old bolts.
If it is the Catalytic converter you can always buy it from on line and have a muffler shop install it like speedy or midas. Make sure you ask for stainless bolts and nuts.
Before you go through all the trouble, re check the DTC codes. Most of the time it's the O2 sensors that go bad and i question the garage charging you so much for the replacement of a catalytic converter.
Good luck and keep me posted.

Posted on Jun 01, 2009

kirkx
  • 2019 Answers

SOURCE: torque converter for ford f-150

Torque converters are cheap, around $100 because they can easily be rebuilt. But they almost never go bad, because they only have one bearing, and it is always bathed in oil.
So why do you think you even need one?
It bolts to the drive plate, which is like a light flywheel replacement, so that the starter has a ring gear to engage. So it it not part of the transmission at all, and is between the transmission and engine. If it is leaking, it is not hard to replace the seals and bushings once you take the transmission out.

Posted on Jul 25, 2009

  • 181 Answers

SOURCE: how much should it cost to replace the torque

EVERY SHOP HAS A PRICE, YOU NEED TO SHOP AROUND, SEE FOR YOUR SELF

Posted on Oct 30, 2009

  • 3741 Answers

SOURCE: Head gasket blown. What is approximate cost to

    Considerations
  1. Many internal engine problems, such as a blown head gasket, cracked head or cracked piston, can be repaired without having to replace an entire engine.
  2. Potential
  3. While taking the time to replace an engine may seem labor-intensive and costly, it will add years to a vehicle's life and will save a car owner from the cost of having to buy a new car.
  4. Benefits
  5. Taking a car to a mechanic and replacing an engine with a used engine can cost between $1,000 to $2,000 for parts and labor.
  6. Solution
  7. Car owners interested in replacing their engines with new ones can expect to pay anywhere between $2,000 to $4,000.
  8. Speculation
  9. For those interested in doing the engine replacement themselves, purchasing specialized tools needed for the job is a cost to consider in addition to the price of a replacement engine.

Posted on Nov 16, 2009

Testimonial: "Thank you."

Molson02536
  • 3854 Answers

SOURCE: What would it cost to fix a torque converter stuck

It may be as simple as a short in the wire or a bad TCC solenoid that needs to be replaced. The most would be just under $200.00 with parts and labor with transmission fluid and filter replaced.
If your lucky, you may find where the issue is if it's a wire that is shorting out. Inspect your TCC switch on your brake peddle and it may just need to be readjusted. The other place would be a short to the transmission harness where is connects to the transmission. Once all electrical connections have been inspected, then your going to have to move on to having a transmission shop replace the TCC solenoid replaced.
TCC always locked: TCC apply solenoid circuit shorted to ground, TCC solenoid blockage (easy fix in pan), or TC broken (must remove trans and replace TC).
Thank you for using fixya and most common would be a ground problem, good luck and hope it's will cost you nothing if you find it.

Posted on Jun 20, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Jatco 506e


Shudder could be the lockup torque converter if it is an automatic transmission. Another one would be the drive axles. Check the CV joints and u-joint in the drivetrain. If the shudder comes and goes with load changes, it could be either. However, to tell if it is the torque converter, watch the tachometer when the shudder occurs. If the RPM rises slightly, then drops off as the shudder stops, it is the torque converter. There is an additive for this issue that can be purchased an any parts store, called shudder-ease. Hope this helps you.

Oct 24, 2013 | Cars & Trucks

1 Answer

Torque converter


Transmission will be fine. The torque converter is the oil filled automatic clutch that transmits power for engine to gearbox. If it only does it between second and third, then the transmission is faulty, not the torque converter. You want both changing. The money is in the labour, so economically it makes sense to do both. At 91,000 miles, you need a new car.

Jun 17, 2017 | Honda Civic Cars & Trucks

1 Answer

Obd 2 code p0741. What would cause this code???


HERE IS THE DIFINTION
Automatic transmission torque converter clutch stuck off.
Possible causes - Low transmission fluid level
- Dirty transmission fluid
- Faulty torque converter clutch solenoid valve
- Torque converter clutch solenoid valve harness or connectors
- Torque converter clutch solenoid valve circuit is open or shorted
- Transmission internal mechanical problem

Sep 16, 2011 | Cadillac STS Cars & Trucks

1 Answer

Transmission wont engage


Hello, it sound like my ******, it will not engage either. When is the last time you have automatic transmission fluid changed? Check it, and if smells like something has been burning. The biggest killer of automatic transmission is heat. Auto manufactures don't give these auto/trucks enough fluid reserve and adequate fluid cooling, especially if the auto/truck is in hot weather condition and the vehicle is pulling a load.



It also sound like the torque converter is out. This will probably mean rebuild transmission with new torque converter or have your Oldsmobile Ciera rebuilt with a new torque converter. GB...stewison

Sep 04, 2011 | 1995 Oldsmobile Cutlass Ciera

2 Answers

2006 Hyundai Sonata, 3.3 L V-6, automatic transmission. Transmission will not shift automatically (e.g. from D1 to D2, D3, etc.) When using Sport Shift, it will not stay in 4th gear unless I hold the...


Unfortunately, there is very little that an untrained person can do much more to an automatic transmission than check the fluid and make sure that it is getting coolant so that it doesn't get too hot.
I work on cars all the time, and have rebuilt two automatic transmissions. One I was lucky and got it exactly right (beginners luck) and the other one I didn't. After multiple trys and probably replacing good parts, I gave up and took it to a transmission shop. So unless you are either VERY LUCKY or trained to work on them, my advice is to bite the bullet and seak professional help.

Sep 04, 2011 | 2006 Hyundai Sonata

1 Answer

2000 hyundai sonata auto transmission removal?


Disconnect the battery.remove the front tires.disconnect the lower control arms from the hubs.Remove the axle nuts.Swing away the hub until it clears the end of the drive axle spline.Keep it to the side.Remove the drive axles. remove the starter.remove the torque converter bolts on the flywheel.disconnect the gear linkage and all electrical connectors.disconnect the transmission cooler lines. undo the transmission mounts. use a transmission jack to lower the transmission.Installation is the reverse of the above.Be sure to torque all bolts and nuts to spec,pre load the mounts and replace the cotter pins with new ones.it should take about 5 hours to re and re the transmission.

Apr 13, 2010 | 2000 Hyundai Sonata

2 Answers

MY 2003 ACURA SE LIGHT CAME ON MY NEIGHBOR HAD A TESTER IT SHOWED P0740 TCC MALFUNCTION WHAT DOES THIS MEAN?


Torque Converter Clutch. It has to do with the transmission. It could be a small issue such as a trans. fluid and filter change. Or could be the solenoid failing. At worst, the torque converter is shot...transmission failure.

Apr 09, 2010 | 1999 Acura CL

2 Answers

Car surges at times when driving. Placed obdII on it and recieved a code of PO741. ''torque converter clutch solenoid circuit performance or stuck out'' was told torque converter bad. Could it be a sensor...


U have a problem with the electric transmission torque converter clutch, to repair this requires the removal of the transmission, and in most cases a new torque converter.

Sep 18, 2009 | 2006 Hyundai Sonata

1 Answer

How much fluid does a 99 sonata v6 trany hold


8.2 Quarts
Application:
With automatic transmission
Total refill (includes torque converter

Transmission Fluid Type
Application:
With automatic transmission
Note :
Castrol Import Multi Vehicle ATF
Castrol High Mileage ATF
Maxlife ATF Dex/Merc Transmission Fluid Type GL-4,GL-5
Application:
With manual transmission

Note :
Weight = 75W-85W

Aug 13, 2009 | 1999 Hyundai Sonata

Not finding what you are looking for?
1996 Hyundai Sonata Logo

Related Topics:

220 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8215 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...