Question about 1994 Chrysler Concorde

1 Answer

Heater stuck on

My 1994 concorde's heater will not shut off. We've removed it, disconnected it, the thing is possessed. We're heading into summer time and I don't want my car 89 degrees inside as well as outside!

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I had this same problem. The only way I could turn off the heater was to pull the fuse. I ended up replacing the HVAC control module, located just below the stereo. It wasn't as expensive as I thought it might be (I went through a salvage yard) and it's worked great ever since. Good luck!

Posted on Jun 06, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Bypassed heater core by connecting hoses together. Problem is heater blower turns on and instrument panel goes dead. Concerned, is there a relay or fuse I should disconnect?


there could still be water in the blower motor from the leak that shorts the power. you should remove the fuse for the heater until it has dried up ..or open it up and dry the inside yourself

Feb 08, 2015 | 1994 Chrysler Concorde

1 Answer

How do I replace the heater core in a 1994 Crysler Concord


YOU NEED A SHOP MANUAL..OR AT LEAST READ HEATING/COOLING SECTION. THE HEATER CORE IS LOCATED (GENERALLY) UNDER THE DASH ON PASSENGERS SIDE. YOU MAY HAVE TO REMOVE A FEW COMPONENTS,OR MOST OF THE DASHBOARD.

Nov 09, 2014 | Chrysler Cars & Trucks

1 Answer

Replacing heater coil on 1994 honda accord


Replacing the heater CORE ? Drain the cooling system disconnect the heater hoses under the hood at the fire wall then remove the glove box inside the car . then remove the heater box as a whole unit . Take to your work bench now seperate the the unit and remove the heater core.install the new core and reinstall every thing that you took out in reverse order . This is a 5 hour job and if you are not a technician i would not recommend trying this with out buying the work shop manuel for you to follow step by step . You can buy one online at a book store or a parts store . The Chilton manuels are the best in my opinion . Good Luck

Aug 05, 2012 | 1994 Honda Accord

1 Answer

My 94 concorde will not put out heat but everything else appears to function correctly. i have checked the heater hoses and they are hot, but still no heat. how do i fix it?


Hi,
Sounds like the heater valve is stuck.
Check if there is heat on the return hose from the heater core back to engine inlet.

Tell me if am right.

Nov 24, 2011 | 1994 Chrysler Concorde

1 Answer

How do i replace a heater core in a 1994 vw passat


remove dashboard.  and knee panel.  center console.  remove bolt holding tip stereing wheel. disconnect all wiring. leave heater controls connected to heater housing, but remove from dash. seperate heater housing from blower housing by removing 6 clips.  remove two nuts from under hood on firewall and disconnect heater hoses.  pull heater housing from firewall and seperate from blower housing.  remove heater core from heater housing.  took me an hour and a half to remove.  two clips are between firewall and heater housing, and was able to pop them off when i tugged on heater housing.

Nov 05, 2009 | 1994 Volkswagen Passat

2 Answers

2005 Dodge caravan is overheating, but there is no heat inside the van. I changed the thermostat and also checked for air lock in the system. Is the water pump the next thing to check?


Overheating can be caused through a lot of things But 1st on the heater pipe going into the cab ,through the firewall there is 2 heater pipes 1of them has a air valve on it so when you turn to hot the vacuum opens the valve and lets the hot water come through.or it could be under the dash on inside of firewall by heater inlet.BUT check your radiator for dust and dirt in the outer cores/Loose fan balt/water pump falty/Head gasket leaking/ plus others will all cause
the car to overheat .
So let me know how you get on Ron

Oct 12, 2009 | 2005 Dodge Caravan

1 Answer

My 1994 Impreza suddenly started spewing hot air...


turn off the heater tap under the bonnet by disconnecting the cable and sliding the lever ouve,if its stuck take off heater inlet and outlet water hoses and connect them,youve then bypassed your heater that will fix it

Oct 01, 2009 | 1994 Subaru Impreza

1 Answer

How to repair heater core


The step by step procedure to remove the heater core is given below :
  1. Disconnect the negative battery cable.
  2. Drain the engine coolant into a clean container for reuse.
  3. Raise and safely support the vehicle.
  4. Remove the rear lateral transaxle strut mount, if necessary.
  5. Remove the drain tube and disconnect the heater hoses from the core tubes, lower the vehicle.
  6. Remove the sound insulators, console extensions and/or steering column filler, as required.
  7. Remove the floor console outlet ductwork and hoses.
  8. Remove the heater core cover.
  9. Remove the heater core mounting clamps and remove the heater core.

Sep 27, 2009 | 1994 Buick Skylark

1 Answer

HEATER


  1. Disconnect battery ground cable.
  2. Remove glove box attaching screws, then the glove box.
  3. Remove lower sound insulator attaching screws and nuts, then the lower sound insulator.
Heater And A/C Programmer And Actuators

  1. Remove programmer as follows:
  1. Remove programmer shield attaching screws, then the programmer shield.
  2. Disconnect threaded rod from programmer.
  3. Disconnect programmer electrical and vacuum connector, then remove programmer.

  1. Disconnect body control module electrical connector, then remove module attaching screws and module.
  2. Remove relay panel from module assembly, then the module assembly heater core cover.
  3. Disconnect heater hoses from heater core.
  4. Remove two heater core attaching screws, then the heater core.
  5. Reverse procedure to install.

Jan 03, 2009 | 1994 Cadillac DeVille

1 Answer

1997 chrysler concord


My girlfriend's 95 concorde was having a problem that sounds like that. Some times when she started the car, the heater control console would not turn on but the heater would turn on full blast. I fixed it by replacing the control console with one that i picked up from the junk yard. Hope this helps you

Oct 21, 2008 | 1994 Chrysler Concorde

Not finding what you are looking for?
1994 Chrysler Concorde Logo

Related Topics:

214 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

75051 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7726 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...