Question about 2000 Honda Passport

1 Answer

Cannot find spark plug terminals.

I can't find the spark plug terminals in a 2000 Honda Passport. Does anybody have a schematic?

Posted by on


1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that gotĀ 5 achievements.


    An expert whose answer gotĀ voted for 20 times.


    An expert who has answered 20 questions.

  • Expert
  • 77 Answers

It is a coil on plug system. The Red or Red/Striped wire is the control of the primary winding from the ECM. The BLK/ORG wire is the ground side of the primary winding. The BLK/BLU wire is the secondary winding wire.

ONLY USE DENSO SPARK PLUGS IN A 2000 PASSPORT. If you use aftermarket plugs, the crankshaft sensor tends to detect it as a signal to the computer, and for some reason it resets the computer. Seen it happen more than once.

13 ft/lb torque spec by the way.

Posted on May 21, 2009


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

2000 honda passport got 3 cyclinders firing and 3 not

Check for power at the injector plugs. The injectors are on one power source. No power, broken wire. If you have coil on plugs, do the same. If you have a coil pack, check for spark on the bad side. No spark, replace the coil pack.

Feb 24, 2016 | 2000 Honda Passport

1 Answer

2002 honda passport no spark

If the starter is cranking but not starting, your coils have gone bad. They are what plugs into the top of the spark plug. Isuzu Motors/Honda combined the coils to make it simple but in the process made things less reliable. If no sounds are coming at all, not even the chime when you open your door with the key in, replace the battery!

Feb 22, 2014 | 2002 Honda Passport

1 Answer

2001 Honda Passport, change spark plugs with coils on top. Hard to do? Spark plug gap?

not hard to do , just need a little patience to get the coils out of the plug wells.also a swivel type 5/8 inch spark plug socket works best when removing the plugs. as for the spark plug gap, the vehicle requires platinum plugs which do not need gapped.

Aug 17, 2011 | Honda Passport Cars & Trucks

1 Answer

How do you keep sparks plugs from popping out in a 1995 Honda Passport?

Try pushing down real hard on them until you Here a click, if you changed the plugs be sure you didn't forget to screw the caps on them

Jul 30, 2011 | 1995 Honda Passport

1 Answer

Where are the sparks plugs on 1996 Honda Passport

look on the valve covers 3 on each side need to remove the upper intake to see them

Apr 12, 2010 | 1996 Honda Passport

1 Answer

I need to know what spark plug is Cyl 3 on a 1996 Honda Passport 3.2 V-6

its is best to replace all of the spark pugs in a motor rather then just one, if you replace just one you are asking for more prob in the future. stand gapping may be nessacary .045-.065

Oct 23, 2009 | 1996 Honda Passport

1 Answer

Gas tank

just rip it off and then have a look ,does a proper mechanic have a workshop manual for every car in his head??

Sep 08, 2009 | 2000 Honda Passport

1 Answer

What are p1515 and p1295 for, for honda passport 2000

I had the similar problem after changing out the waterpump and timing belt, came to find out it was the battery cable connectors needed cleaning. simply use a wire brush and clean the inside of the connector before connecting it to the battery terminal post. When you have insufficient voltage going to your electrical components, it will tend to chatter(relays). This was the first symptoms i had with my passport, but once i cleaned the cable connector to the battery post, it started right up,problem fixed. I hope this helps. 2kpassport.

Jun 08, 2009 | 2000 Honda Passport

1 Answer

Passport not firing

Open the fuel line near the injector pump by loosening the line nut preferably with a hex line wrench or find a bleed port on the injector and loosen it. Remove the ignition coil wire to to avoid a fire. Once some place is open for the gas to flow and flush the fuel line, crank on the engine for a short time til all the air is flushed from the fuel line, then tighten the line or bleed port nut to stop the leaks. Replace the coil wire and start the engine normally. Good luck and happy new year.

Dec 12, 2008 | 1995 Honda Passport

Not finding what you are looking for?
2000 Honda Passport Logo

149 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts


Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides