Question about 2005 Ford Fiesta Zetec
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
get in your car close door hit the unlock button then put key in the ignition cycle the key from off to on (STOP BEFORE START POSITION) cycle key off to on 7 times after the 7th trime the doors should lock the unlock automatically that means u are in trainning mode hit the unlock button on key fob. the key fob should now work if it doesn't then try changing batt
Posted on Nov 27, 2008
Check out page 57 of the manual:
If that doesn't work, it sounds like a trip to the dealer.
Posted on May 02, 2009
Unless the batteries on your key have run flat and need replacement, the key needs reprogramming. Advanced diagnostics at an authorised service centre will sort both issues pretty fast.
Posted on Jul 27, 2009
SOURCE: remote key fob won'tprogram
1-insert and remove key from ignition two times
2-close and open driver door two times
3-insert and remove key once from ign.
4-close and open drvr door twice
5-insert key into ign.,then close driver door
6-turn key to on (not start) then off, twice this is rewrite mode,have all remotes to reprogram it will clear any lost remotes.
7-remove key from ignition,the door locks should cycle twice.if not start over.it may take a few tries.
8-press lock/unlock together and hold for a second
9-release,and press lock on remote,the door locks will cycle confirming program.continue to do other remotes you have,steps 8 and 9.if only one in possession,you are done. To end mode open door or insert key into ignition.
You'll need to follow the steps with no more than a 1-2 second delay between each step.. hope it works
Posted on Aug 13, 2009
does the hatch open with the trunk release in the car as it should since it sends an electronic signal just like the key fob. The cylinder for the trunk lock is most likely seized and if you want to replace.. you'll need to remove your trim for the trunk to access the locking assembly
Posted on Aug 17, 2009
Tips for a great answer:
Dec 14, 2015 | BMW X5 Series Cars & Trucks
Dec 17, 2014 | 2008 Lincoln Navigator
Jun 29, 2014 | 1999 Volvo V70
Mar 13, 2014 | 2008 Jeep Grand Cherokee
Mar 11, 2014 | 2003 Ford Expedition
Dec 12, 2011 | 2005 Nissan Altima
Jul 28, 2009 | 2001 Jeep Grand Cherokee
Apr 15, 2009 | 1999 Volvo V70
Jan 03, 2009 | 2000 Renault 181
14 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: