Question about 2010 GMC Acadia

Open Question

2010 gmc acadia tire monitoring system light comes on

Toms light flashes but tires have proper tire pressure

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
  • 2 Answers

SOURCE: 2008 GMC 2500 Sierra - Change factory tire pressure setting

Let me understand this.. I ask you guy's a question and before you send me the answer, you want to charge me. Then you ask if I resolved the problem and if so, tell you how I did it. Well I did resolve it and I would be more than happy to tell you how. $29.95 with get my detailed response.

Posted on Feb 16, 2009

Ad
coop442000
  • 187 Answers

SOURCE: gmc 2007 -----service monitor system message and

Hi, this is indicating a low tire pressure issue. The first thing to do, is check all of the pressures, according to the list on the label of the driver door. I say check all, because, if you have had the wheels off, new tires, brakes, or rotations, the relearn may not have been done, and the tire positions, may not be as described. So check all pressures, and if 1 is low, this is the issue. If they are all good, and the light persists, you need to visit the dealer, as you may have a problem with a sensor. Good luck...Coop

Posted on Oct 16, 2010

  • 45 Answers

SOURCE: 08 gmc sierra 2500 service

brocken sencer in rim,has to be replaced,Happens 1 out off every 20 times.







verry poor place to instal sencers.

Posted on Jan 02, 2011

  • 6 Answers

SOURCE: Wheels were changed on my 2008 GMC Sierra 1500

Whoever changed your wheels didn't swap tire pressure sensors or you need to go to some one that can re calibrate tpms system for you.

Posted on Jan 18, 2011

bluebirdmate
  • 1190 Answers

SOURCE: How can I delete (clear)

Hello: I don't think you can remove that feature. It is part of the remote door lock module. You might try installing a Remote door lock module that does not have tire pressure monitor option but I have no experience that it would work, plus it would have to be programed.

Posted on May 25, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

"Service Tire System Monitor" light is on. Could this be a transmission issue?


Gregory, check tire inflation pressures and fill to recommended pressure.

Feb 22, 2016 | 2010 GMC Terrain

1 Answer

Gmc acadia stabilitrak system


Best to have the vehicle checked out by a mechanic if it comes back on. Also if you where driving in wet weather that's a possible reason for the light to display. Al s of double che c k air pressure in tire all the way around the vehicle

Apr 07, 2014 | 2010 GMC Acadia

2 Answers

What does check tire monitor system mean


Tire/s have low pressure and needs additional air added u ntil the proper tire pressure on all 4 tires are within operating limits. This will also extend the tire life. Tire pressure is printed on tire sidewall.

Nov 05, 2013 | 2010 Buick LaCrosse CXL

1 Answer

I put new rims on my 2010 dodge avenger and now my yellow (!) keeps flashing. my tires are not low. how can i fix this


your car had tpms tire pressure monitoring system in each rim you previously had on. they did not get put on the new rims so your car thinks your tire pressure is at zero. so it freaking out. you need to get those sensors on the new rims and reset. that will solve your problem

Mar 06, 2013 | 2010 Dodge Avenger SXT

1 Answer

Tire monitor


To troubleshoot the issue,go through the help link mentioned below:---
CARS: Working of
tire pressure monitoring system
http://technoanswers.blogspot.in/2012/10/cars-working-of-tire-pressure.html-------------
GMC ENVOY spare tire system stopped working?
http://repairhelpcenter.blogspot.com/2012/01/gmc-envoy-spare-tire-system-stopped.html

TIRE PRESSURE LIGHT COMING ON?
http://whoisbyme.blogspot.in/2012/07/tire-pressure-light-coming-on.html

What is Best Tire For the Vehicle?http://technoanswers.blogspot.in/2012/04/what-is-best-tire-for-vehicle.html------------
1998
Toyota
Camry: Tires Make Knock Rattling Noise Over Bumps?http://whatisbyme.blogspot.in/2012/05/1998-toyota-camry-tires-make-knock.html

These will help. Thanks.

Dec 17, 2012 | 2001 Oldsmobile Alero

2 Answers

Tire pressure light comes on when tires are okay. Can I reset something myself so it doesn't?


You are right, the pressure sensors can be affected by temperature. If its below 10 Degrees there is a chance they will malfunction, I had a similar problem on my Jeep Wrangler and it required a heated garage for an immediate rectification. Alternatively, some tire shops have a computer which can communicate with the tire pressure sensors and reset the sensors once they determine that the correct air pressure has been applied to the tire.

Oct 20, 2012 | Cars & Trucks

3 Answers

My low tire light came on so I went and had air and all the tires checked but now I don't know how to turn the light off. I have had the car since 2000 and it has 50,000 miles on it but could never figure...


Hello Mattingly.

Here is some information for you regarding your problem.

The Tire Inflation Monitor (TIM) system alerts the driver when the pressure changes in one of the tires. The system only detects a low pressure condition while the vehicle is being driven. Once a low tire pressure condition is detected, the system informs the driver that a low tire pressure condition exist's, whenever the ignition is ON.
The LOW TIRE message appears on the Instrument panel if the tire pressure in one tire becomes at least 82 kPa (12 psi) lower or higher than the other three tires. The message does not appear if more than one tire is low or high, or if the system is not calibrated properly. The system does not inform the driver which tire is low. To clear this message, set the tire pressures in all four tires to the proper pressures and perform the system reset procedure. Refer to Tire Inflation Monitor Reset Procedure for service procedure.
The Tire Inflation Monitor software requires approximately one half hour of straight line driving to complete the TIM autolearn. There are several speed ranges that the EBCM needs to learn the tire inflation configuration in order to have the full capability of detecting a low tire condition. The speed detection ranges are the following:

  • 24-64 km/h (15-40 mph)
  • 64-113 km/h (40-70 mph)
  • 113-145 km/h (70-90 mph)
Each speed range has 2 modes of low tire detection.

  • Monitor Mode 1
  • Monitor Mode 2 The EBCM learns the tire inflation configuration for each speed range independently. In Monitor Mode 1, the EBCM has only partially learned the tire inflation configuration for the speed range and has limited detection capability for a low tire condition. In Monitor Mode 2, the EBCM has fully learned the tire inflation configuration for the speed range and has full detection capability for a low tire condition. If the EBCM is not in Monitor Mode 1 or Monitor Mode 2, a low tire condition cannot be detected because the EBCM has not learned the tire inflation configuration of the vehicle.

To reset (calibrate) the system:
Turn the ignition switch to RUN. Then press and hold the RESET button for about five seconds. The red RESET button is located inside the instrument panel fuse block on the right side of the dash.. The LOW TIRE light will come on and flash three times and then it will turn off.
The system completes the calibration process during driving.
The system normally takes 15 to 20 minutes of driving in each of three speed ranges to "learn" tire pressures. The speed rages are 15 to 40 mph (25 to 65 km/h), 40 to 65 mph (65 to 105 km/h) and above 65 mph (105 km/h).

There you are, this should fix you up.
Keep in mind this system uses wheel speed sensors to calculate. If one of your sensors isn't working your low tire light will remain on.

Thank you for using FixYa.

KL

Jan 20, 2011 | 2000 Buick Century

1 Answer

Service tire monitor on what is the problem? how do you reset the system?


TIRE PRESSURE MONITOR SYSTEM
The Tire Pressure Monitor System (TPMS) uses radio and sensor technology to check tire pressure levels. If your vehicle has this feature, sensors are mounted on each tire and wheel assembly, except the spare tire. The TPMS sensors monitor the air pressure in your vehicle's tires and transmit tire pressure readings to a receiver located in the vehicle.

The TPMS is designed to alert the driver, if a low tire pressure condition exists. This system also allows the driver to check tire pressure levels using the Driver Information Center (DIC).

When a low tire pressure condition is detected, the TPMS displays the "CHECK TIRE PRESSURE" warning message on the DIC, and at the same time illuminates the low tire pressure warning symbol.

You may notice, during cooler weather conditions, that the tire pressure monitor light, located on the instrument panel cluster, and the "CHECK TIRE PRESSURE" message will appear when the vehicle is first started and then turn off as you start to drive the vehicle. This could be an early indicator that the tire pressures are getting low and need to be inflated to the proper pressure.

Each tire, including the spare (if provided), should be checked monthly when cold and inflated to the inflation pressure recommended by the vehicle manufacturer on the vehicle placard or tire inflation pressure label. (If your vehicle has tires of a different size than the size indicated on the vehicle placard or tire inflation pressure label, you should determine the proper inflation pressure for those tires.)

As an added safety feature, your vehicle has been equipped with a tire pressure monitoring system (TPMS) that illuminates a low tire pressure telltale when one or more of your tires is significantly under-inflated.

Accordingly, when the low tire pressure telltale illuminates, you should stop and check your tires as soon as possible, and inflate them to the proper pressure. Driving on a significantly under-inflated tire causes the tire to overheat and can lead to tire failure. Under-inflation also reduces fuel efficiency and tire tread life, and may affect the vehicle's handling and stopping ability.

Please note that the TPMS is not a substitute for proper tire maintenance, and it is the driver's responsibility to maintain correct tire pressure, even if under-inflation has not reached the level to trigger illumination of the TPMS low tire pressure telltale.

The "CHECK TIRE PRESSURE" warning message and low tire pressure light (telltale) will appear at each ignition cycle until the tires are inflated to the correct inflation pressure.

The Tire and Loading Information label (tire information placard) shows the size of your vehicle's original tires and the correct inflation pressure for your vehicle's tires when they are cold.

Your vehicle's TPMS can alert you about a low tire pressure condition but it does not replace normal tire maintenance.

NOTICE: Do not use a tire sealant if your vehicle has Tire Pressure Monitors. The liquid sealant can damage the tire pressure monitor sensors.

RESETTING THE TPMS IDENTIFICATION CODES
Each TPMS sensor has a unique identification code. Any time you rotate your vehicle's tires or replace one or more of the TPMS sensors, the identification codes will need to be matched to the new tire/wheel position. Each tire/wheel position is matched to a sensor, by increasing or decreasing the tire's air pressure. The sensors are matched to the tire/wheel positions in the following order: LF TIRE (left front tire on the driver's side of the vehicle), RF TIRE (right front tire on the passengers side of the vehicle), RR TIRE (right rear tire on the passengers side of the vehicle), and LR TIRE (left rear tire on the driver's side of the vehicle).

You will have one minute to match the first tire/wheel position, and five minutes overall to match all four tire/wheel positions. If it takes longer than one minute, to match the first tire and wheel, or more than five minutes to match all four tire and wheel positions the matching process stops and you will need to start over.

The TPMS sensor matching process is outlined below:
  1. Set the parking brake.
  2. Turn the ignition switch to "RUN" with the engine off.
  3. Turn the headlamp switch from "OFF" to the parking lamps setting four times within three seconds. A double horn chirp will sound and the TPMS low tire warning light will begin to flash. The double horn chirp and flashing TPMS warning light indicate that the TPMS matching process has started. The TPMS warning light should continue flashing throughout the matching procedure. The "SERVICE TIRE MONITOR" message will be displayed on the Driver Information Center (DIC).
  4. Start with the driver's side front tire.
  5. Remove the valve cap from the valve cap stem. Activate the TPMS sensor by increasing or decreasing the tire's air pressure for 10 seconds, then stop and listen for a single horn chirp. The single horn chirp should sound within 15 seconds, confirming that the sensor identification code has been matched to this tire and wheel position. If you do not hear the confirming single horn chirp, you will need to start over with Step 1. To let air-pressure out of a tire you can use the pointed end of the valve cap, a pencil-style air pressure gage or a key.
  6. Proceed to the passenger's side front tire, and repeat the procedure in Step 5.
  7. Proceed to the passenger's side rear tire, and repeat the procedure in Step 5.
  8. Proceed to the driver's side rear tire, and repeat the procedure in Step 5.
  9. After hearing the confirming horn chirp for the left rear tire, check to see if the TPMS warning light is still flashing. If it is, turn the ignition switch to LOCK to exit the sensor matching process. If the TPMS warning light is not flashing, the five minute time limit has passed and you will need to start the process over beginning with Step 1.
  10. Set all four tires to the recommended air pressure level as indicated on the Tire and Loading Information label.
  11. Put the valve caps back on the valve stems. The spare tire does not have a TPMS sensor. If you replace one of the road tires with the spare, the "CHECK TIRE PRESSURE" message will be displayed on the DIC screen. This message should go off once you re-install the road tire containing the TPMS sensor. The "SERVICE TIRE MONITOR" message is displayed when the TPMS is malfunctioning. One or more missing or inoperable TPMS sensors will cause the service tire monitor message to be displayed.

Nov 23, 2010 | 2006 GMC Yukon

2 Answers

BOUGHT A NEW ACADIA YESTERDAY. ON MY WAY TO WORK THIS MORNING AN EXPLAINATION POINT LIGHT CAME ON. WHAT IS THIS?


could be low tire pressure or anti slip traction control was working. turn of your traction control and the light will stay on... or read your owners manual

Dec 16, 2008 | 2008 GMC Acadia

Not finding what you are looking for?
2010 GMC Acadia Logo

Related Topics:

57 people viewed this question

Ask a Question

Usually answered in minutes!

Top GMC Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Freddy

Level 3 Expert

1311 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...