Question about 2002 Suzuki XL-7

Open Question

HOW TO CHANGE STARTER - 2002 Suzuki XL-7

Posted by Anonymous on

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What's the easiest way to change the starter on a


The same way you would change a regular car starter.

Feb 21, 2012 | 1986 Nissan Pickup 4WD 1986

1 Answer

How to change starter in 1983 volvo gl 2.3 4cyl


The starter is located just below and behind the alternator and A/C compressor (if equipped)
1.Disconnect the battery
2.Disconnect the wires going to the starter from the starter.
3. Remove the 2 or 3 bolts holding the starter in with either a 12,13 or 14. (they change sizes and amounts through the years and models)
4. Pull the starter out and up.
5. Reverse for installation.
Hope this helps.

Dec 06, 2011 | 1983 Volvo GL

1 Answer

Need to change starter on f250 2004 5.4lt.


mcdevito75 here, If It"s the original starter let the shop do it as the bolts will be very, very tight.

Jun 18, 2010 | 2004 Ford F250

2 Answers

Step by step instructions to change starter/94 Lexus LS400


Disconnect the battery.
Disconnect the wires from the starter.
Unbolt & remove the starter.
Bolt the new starter into place.
Connect the wires to the starter.
Connect the battery cables.

Dec 30, 2009 | 1994 Lexus LS 400

1 Answer

The starter clicks but will not turn over change battery


Not the battery when you hear this....almost always is the starter.

Check your connections for the battery for corrosion/acid build-up...then check the connections to the starter....lastly...change the starter.

Nov 16, 2009 | 1998 Ford Aerostar

1 Answer

Change starter 192 buick roadmaster


dissconect battery, remove flywheel cover,remove 2 bolts holding starter, now drop starter and remove wiring and take out,

Sep 30, 2009 | 1992 Buick Roadmaster

1 Answer

How to change starter selinoid


the starter selinoid is on the starter itself. normally a parts dealer will never seel you a starter selinoid individually but they will sell the starter with the selinoid. but you cant change the selinoid without changing the starter

Jul 09, 2009 | 1997 Chevrolet Camaro

1 Answer

I need to change my starter on a 1991 mercury sable


Starter are one of the easier mechanical engine parts to change.

1) DISCONNECT THE BATTERY.
2) Disconnect the electrical cable running to the solenoid on the starter.
3) Remove the two bolts holding the starter in place.
4) Pull the starter out.

To install another starter, do the above steps in reverse order in reverse.

Apr 04, 2009 | 1991 Mercury Sable

1 Answer

How do i change the starter on a 1999 sr5 4runner


You'll need basic hand tools to change out the starter. The starter is usually held in place by 2 or 3 bolts. You'll need to make sure you note where the electrical connections go in order to replace them in the correct location following starter replacement. You'll have to get under the vehicle to replace the starter, even so, It shouldn't take more than an hour.

Feb 22, 2009 | 1997 Toyota 4Runner

1 Answer

Starter change in 1999 honda accord


hi there its really simple to change starter motor on those it sits on top the gear box with two no 12 bolts if its automatice trans hope that helps cheers

Jan 20, 2009 | 1999 Honda Accord

Not finding what you are looking for?
2002 Suzuki XL-7 Logo

Related Topics:

89 people viewed this question

Ask a Question

Usually answered in minutes!

Top Suzuki Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Boyet Soriano
Boyet Soriano

Level 2 Expert

293 Answers

Are you a Suzuki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...