Question about 2007 Toyota Hilux 2.7
How can I reset the airbag light
Posted by Anonymous on
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Take the Vehicle back to the Installer/Supplier, for a Free of Charge CHECK and ADVISE under New Engine Warranty. If the OIL PRESSURE is LOW, when starting up from COLD, there is a genuine fault, so do not drive any distance.
Posted on Aug 28, 2009
Check the connection to crank sensor, if wiring is good and connection is clean then replace the crank sensor and reset the code, this is the first step, the computer could be a problem also but most times its the crankshaft sensor. good day
Posted on Feb 22, 2012
Testimonial: "The connections to the sensor were bad and the hard starting is gone.Thanks JB"
Remove the key from the ignition but keep it handy. Important: Disconnect the negative terminal of the battery for longer than 90 seconds to prevent the risk of having the airbags deploy! Replace the diesel filter (Follow the instructions that can be found in Toyota service manuals (search www). Remove the diesel filter sensor cable (the one on top of the filter assembly). Make sure the new O-rings seat properly. Close the filter assembly by turning the locking ring until it clicks. Bleed the filter assembly by pushing the little plunger thing on the top of the assembly until pumping becomes difficult. Connect the negative back onto the battery. Insert the key in the lock and turn until the dashboard warning lamps come on, but do not start the car yet. Within 3 to 60 seconds of doing this re-connect the diesel flter sensor cable. The light should be extinguished. Obviously there could be another problem causing the light to remain on (not flashing - steady on). If the light is flashing, then you have water in the system and should follow the answer supplied elsewhere by someone else to drain the water. Now start the car and enjoy clean diesel fuel driving. You should really not wait for the light to come on steady before chnaging the filter. Some fanatics believe every 10,000km is the longest you should wait, but this depends on fuel quality, low or high sulfur content, etc. Rather do it more frequently than having to buy new injectors.
Posted on Jul 28, 2012
Tips for a great answer:
Dec 11, 2017 | Toyota Cars & Trucks
Nov 11, 2017 | Toyota Cars & Trucks
Oct 10, 2016 | Cars & Trucks
Jul 24, 2016 | Toyota Cars & Trucks
Mar 03, 2016 | Toyota Cars & Trucks
Jul 16, 2014 | 2007 Toyota Hilux 2.7
Feb 22, 2013 | Dodge Grand Caravan Cars & Trucks
Jan 09, 2013 | 2006 Toyota Land Cruiser
Jul 04, 2012 | 2006 Toyota Hilux 3.0
Feb 22, 2012 | 2006 Toyota Hilux 3.0
70 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: