Question about 1991 Nissan Maxima

Open Question

1991 maxima fuel pump - 1991 Nissan Maxima

Posted by Anonymous on

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 407 Answers

SOURCE: 1991 Nissan Maxima wont start

need to know how fuel pressure if way below 36psi maybe why it wont start

Posted on Oct 13, 2009

toneman2121
  • 775 Answers

SOURCE: 1991 nissan maxima won't restart after crash

the fuel cut-off switch is tripped. there is a reset for it. look in the manual

Posted on Mar 02, 2010

emissionwiz
  • 75807 Answers

SOURCE: where is the fuel pump

Nissan doesn't use an inertia switch, they use a roll over valve.

Posted on Mar 10, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1991 Nissan maxima hesitates


Best guess is O2 sensor is reading too much unburned fue in the exhaust for some reason and leaning out the fuel flow to compensate. Runs when you throw more throttle at it but leans out as you try to hold steady speed. Should throw a code though.

Apr 25, 2013 | 1991 Nissan Maxima

1 Answer

I have a 1991 nissan maxima i have had no problems with it at all til yesterday. I stopped at a stop sign and when i stepped on the gas it would not move it was running fine but car wont move at all.


either transmission or motor--with the age cud be a # of things--start with simplest 1st--chec fluid and level in gears--then test fuel pump etc--when was last electrical tuneup--buy a repair book for maintenance details

Apr 07, 2011 | 1991 Nissan Maxima

1 Answer

Where is the fuel pump inertia switch for a a 1991 nissan maxima


Nissan doesn't use an inertia switch, they use a roll over valve.

Mar 10, 2011 | 1991 Nissan Maxima

1 Answer

Is there a fuel reset button for the fuel pump on my 1992 Nissan Maxima? If so where is located.


There is no fuel pump reset button on the 1992 Maxima. Check your fuel pump fuse under the dash. If it's not blown, check for current at the fuel pump connections. If you have current at the pump, then you probably have a bad fuel pump.

Sep 22, 2010 | 1992 Nissan Maxima

1 Answer

I have a 1991 nissan maxima,i tried to start the car for work today and it would not start,it cranks but it wont start it has 3/4 of a tank of gas,what could be the problem?


Have the fuel pressure tested, the pump is electric and more than likely has stopped working, it is located inside the fuel tank

Sep 16, 2010 | 1991 Nissan Maxima

1 Answer

I ran out of gas in my 91 maxima and it cranks but it just wont turn over and start is it the fuel pump or an electrical thing


if its a stick/manual,push start it,if its auto,crank it but dont step on the accelerator,sometimes,u can flood the engine when u put fuel in and u crank with your foot on the gas pedal.follow your air filter all the way to the carbuerator,open it and then crank,be careful,u might get a flash bang from all the air flow,good luck

Aug 05, 2010 | 1991 Nissan Maxima

1 Answer

1991 nissan maxima won't restart after crash


the fuel cut-off switch is tripped. there is a reset for it. look in the manual

Mar 02, 2010 | Nissan Maxima Cars & Trucks

1 Answer

1991 Nissan Maxima wont start


need to know how fuel pressure if way below 36psi maybe why it wont start

Oct 13, 2009 | 1995 Nissan Maxima

1 Answer

Power steering pump leaking on the bottom side hose, does pump need to be replaced or can the hose just be replaced and how difficult . 1991 nissan maxima.


If the leak is from the pump unit it will need to be replaced,
If the leak is just from the hose it can be replaced.
Identify the definite source of the leak, before proceeding.
A new hose could probably be fitted by DIY if you have the correct tools.

Aug 10, 2009 | 1991 Nissan Maxima

2 Answers

1991 maxima crank, putts for 6 seconds, touch accelerator it dies


1st thing to do is try cleaning the inside of the MAF sensor and having the ECT sensor tested, that controls cold enrichment, it does the same thing as a choke, sounds like you have a lean run issue. You might also consider getting the fuel injectors professionally cleaned, it can make a real difference.

Nov 15, 2008 | 1991 Nissan Maxima

Not finding what you are looking for?
1991 Nissan Maxima Logo

Related Topics:

18 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

713 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...