Question about Cars & Trucks

1 Answer

FITTED NEW WATER PUMP & THERMOSTATE & BELT BUT FAN WONT KICK IN?

FAN WONT KICK IN SO TEMP GAGE RISES.NOW TROUBLE STARTING CAR.

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 21 Answers

Hello, well Jennie Hopkins let me ask you did the fans were working properly? if they were you need to check for i power cable unplug or a bad fuse if everything is connected the right way you may be having problems with something is called coolant switch and one way to testit is starting the car and locate the fan switches and unplug it and bridge them with a piece of cable and see if the activate is the switch or may be looking for false contacts on wires normally this switch is either located close to the thermostat housing or in the radiator the need to have 2 wires plug let me know anything you need.

Posted on Jan 03, 2014

Ad

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
leetamara
  • 702 Answers

SOURCE: Cooling fan wont work

The water temp sensor is located near the thermostat housing. This sensor is what tells the ECM to turn the fan on/off. The water temp sending unit is located near the same area. You know you have the correct sensor is because the water temp sensor has a 2 prong plug. The water temp sending unit only has 1 prong.

Posted on Sep 27, 2008

  • 184 Answers

SOURCE: fuel pump relay was burnt out on mk4 escort rs

The fact that the relay was burnt, might mean you have a short in the
wiring leading to the fuel pump. Check the wiring under the car to the
back, to make sure nothing cut or damaged it while driving.

Posted on Mar 31, 2010

Testimonial: "thanks for ur feedback could u tell me had a look at the wire to the pump when fitted new one and one of the wires looked black copared to the other"

  • 518 Answers

SOURCE: cooling fan does not kick on, and temp. of vehicle

Jeep has a very common problem with fan relay going bad. Sounds like it was stuck on at first,causing it to stay on all the time. Now its bad, wont energize fan. It is located between grill & bumper.

Posted on Jun 22, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Cooling fan wont come on and temp gage didnt say car was getting hot what do i do?


cooling fan normally only cuts in when temperature rises it is fitted with a temperature sensor

Sep 08, 2015 | Cars & Trucks

2 Answers

1998 buick lesabre limited temp rises to the red fast


Could be your thermostat is stuck closed or your water pump is bad,or your coolant temp. switch is bad.Is the coolant in the antifreeze getting hot,if not then it;s the thermostat,easy to do,

Feb 25, 2015 | Buick Cars & Trucks

1 Answer

2005 ford freestar if its not water pump could it be coolant? Fixed my thermostat and still temp rises


Check the coolant level, add some if needed. If you never bled the air out or flushed the system with new coolant, that would be wise to do. Air pockets in your coolant tank can cause pressure and Temps to rise. Make sure your fans are kicking on, once your car reaches a certain temp, it hits a temp switch telling the fan to kick on. Could be faulty coolant temperature sensor as well

Feb 22, 2015 | Ford Cars & Trucks

1 Answer

I have a ford focus water bottle boils and temp gauge in car rises 2 hot but engine not boiling can u help


Check the radiator cap, they wear out. Make sure that the coolant is the right mixture, Check the water pump.

Jan 15, 2015 | Ford Focus Cars & Trucks

2 Answers

My engine overheating problem is in my 2000 land rover. The fan is running and the electric fan comes on at correct engine temperature. After start up the engine runs normal the temp gage rises slowly to...


the usual suspects are:
stuck shut thermostat
clogged raiator
dead water pump
low coolant level
it's sunday, rovers don't work on sunday.
Then again, maybe its wednesday, rovers take half a day then. 25322555-21syibu3fgwpdxocjnkpw0ib-5-0.jpg

Dec 15, 2014 | Cars & Trucks

1 Answer

I have a 2004 Honda Ex coupe 2 door automatic...Well My temp gage goes from cold to hot...I just changed my thermostate..what else can be the problem


Blocked radiator.
Slipping or missing water pump belt.
Blowing head gasket.
Eroded impellor in the water pump
Blocked or restricted hoses
Ignition timing.

All the best Cliff UK

Aug 11, 2011 | 2004 Honda Civic

1 Answer

Hello, i just realised my car is overheating. The temp gauge reaches around 110-115 degress while driving even when stationary. Theres plenty of coolant and i have had a new timing belt and water pump for...


Check the radiator and the cooling fan. open the hood as the engine temperature rises does the fan come on. if not that the problem, Also do this As the car is warming up(from a cold start) near operating temperature, turn off the car, watch out for the fan, engine of key in your pocket fell the radiator is there any hot or cold spot? if there is the radiator is plugged. Also if the radiator isnt plugged new doesnt mean it works, the water pump itself can be faulty. and dont forget the most important device the Thermostat you did timing belt waterpump they should of done thermostat.

May 01, 2011 | 1997 Audi A4

2 Answers

My car has overheating out of ordinary found that water pump was leaking replaced it, drove 2 blocks car said overheated again. Replaced thermostat and it still said was overheating. Even after I let car...


Sounds like you need a temp sensor for the gage. There's 2 under the hood one is a 2 wire in the intake manifold driver's side & a single wire one under the exhaust crossover pipe,also driver's side. You want to change the single wire one. Yes,it's tough. If it's still overheating quick, then it's a head gasket.

Jun 21, 2009 | 1994 Oldsmobile Cutlass Supreme

2 Answers

2001 Elantra Temp Fluctuates


This is caused by you coolant temp sensor you will need to also get a thermostate tp go along with it. This sensor goes bad on elantras all the time giving you a false reading and then finally your car will overheat causing major damage. spend the money to get it fixed now cause i see your out of warranty. joe hyundai tech ps check your top radator hose see if its leaking near the back clamp if it is you will see a white crust. get that fixed to if you see that. you will need a hose and clamp.

Mar 26, 2009 | 2001 Hyundai Elantra

1 Answer

Radiator fan not working


Check your thermostat and check to see if the electric motor has power or not may be a damaged wire or a fried fan motor,you can also check the fan motor by running a power lead from your battery.good luck

Oct 31, 2008 | 1992 Pontiac Sunbird

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

62 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

76848 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...