Question about Cars & Trucks

Open Question

1995 chcvy s10 brake light wire color - Cars & Trucks

Posted by on

Ad

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
wracefans24
  • 1985 Answers

SOURCE: need a wiring diagram for a chevy s10. brake

your power starts at the brake light fuse,check with a test light,then proceed to stop light switch on brake pedal under dash,one wire will be hot when when you check it with your test light, the other won't be until you press down the brake pedal then the power flows through to the second wire,if no power to second wire replace switch,if you have power remove tail light bulbs and check for power in side socket.

Posted on Nov 26, 2009

Ad
  • 701 Answers

SOURCE: im looking for color of a brake wire

Hello heinz2127: My name is Roger and i will help you. The rear brake wires are green and yellow. They also are the turn signal wires. The brake lights work through the turn signal switch.The turn signal switch has logistics for determining which side is blinking so as to make the opposite side to show park brake light.Check the fuse box for a blown fuse. Look at the fuse box under the hood. Also try this. Turn on the four way flashers. Step on the brake pedal . The lights should stop flashing If not I would replace the turn signal switch.

Posted on May 31, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I need a color code for the brake light wiring diagram for a 2000 s10 blazer


The S10 and the Blazer are identified as two different vehicles. The left stop light wire is YEL; the right is DK GRN. The center high mount stop lamp wire is LT BLU.

Oct 30, 2016 | 2000 Chevrolet Blazer

1 Answer

Where is the third brake light relay on a 1995 s10 Chevy pickup


There is none. They use SCR or diode circuit isolation or in the newer models with LED lights they run a separate wire.

Oct 21, 2016 | Cars & Trucks

1 Answer

Where is third brake light relay on1995 Chevy s10 pickup located


There is no separate relay. It runs off the same wire as the rear brake lights

Oct 21, 2016 | 1995 Chevrolet Chevrolet S 10

1 Answer

97 chevy s10 where do i wire in brake light switch?


its onto of the brake pedal just above the cover. un screw the old one

Mar 06, 2014 | 1995 Chevrolet Blazer

1 Answer

2000 s10 trailer wiring instructions. I need to know how to hook my trailer wiring to my 2000 s10 xtreme.


Try this site. http://www.etrailer.com/faq-wiring.aspx. They give color codes and detailed info. If you have one bulb that does both, running and stop lights, then simple wiring to colors should correct the proble. If you have two bulbs, one for brake and one for turn signal, you must use a converter. Otherwise, it feeds back to whatever you are wired to.

Nov 07, 2010 | 2000 Chevrolet S-10

1 Answer

NO BRAKE lights have the one in rear window running and turn


Please check the fuse, if okay there is a switch controlled by the brake pedal. Make sure the switch works. The brake lights wiring also goes through the signal light switch. I can't tell you the wire colors to check for 12v into the signal switch or the color wires coming out of the switch

Aug 31, 2010 | 1995 Buick Regal

2 Answers

Need a wiring diagram for a chevy s10. brake


your power starts at the brake light fuse,check with a test light,then proceed to stop light switch on brake pedal under dash,one wire will be hot when when you check it with your test light, the other won't be until you press down the brake pedal then the power flows through to the second wire,if no power to second wire replace switch,if you have power remove tail light bulbs and check for power in side socket.

Nov 24, 2009 | 1997 Chevrolet S-10 Pickup

1 Answer

I need to hook up a boat trailor Whats the color code for a 1995


I suspect that the 4 wire harness includes a ground, so you may not be able to connect both brake lights and turn signals, which are separate lamps on the pickup. You may need to get an adapter.

In any case, the color codes on the pickup are:

Tail lights -- pink/blue
Brake Lights -- green/yellow
Left turn signal -- gray/blue
Right turn signal -- gray/red
Ground -- black

Sep 22, 2009 | 1995 Nissan Pickup

1 Answer

1995 ford mustang break lights do not work.


get a manuel from an auto parts store. in this manuel it will have etm(electrical troubleshooting manuel) it shows the brake lights and wires colors of wires. trace the wire color from the fuse using the diagram. purchase a test light from wal mart to see if your wire has power. if it does there may be a bad connection or component but hte etm shoud show you what components are on the circuit.any questions email me at jacobtaylor3@yahoo.com

Dec 31, 2008 | 1995 Ford Mustang

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

33 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

76649 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...