Question about 1997 Ford Crown Victoria

Open Question

Parking brake want push down - 1997 Ford Crown Victoria

Posted by Anonymous on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Car wont get out of park when i engage brake the safety switch is staying on locking it in park


Looking down at the shifter, look a little forward and to the right.
You will see a little plastic cap. Lift it off and you will see a reset button. Push it down with a phillips screwdriver and it will release the shifter from park.

Mar 28, 2013 | 2006 Ford Fusion

1 Answer

Hummer H3 airbag light wont go off


Airbag light on in a Hummer H3 Dashboard???Here is the fix...
Start the engine of your car, set the parking brake, hold the regular brake pedal down with your right foot. Push down the parking brakepedal to its fully-applied position with your left foot. Now while you are still holding the regular brake pedal down. Quickly release the parking brake, Pull the bottom edge of the lever, located above the parking brake pedal, with the parking brake
symbol, directly rearward to release the parking brake. Make sure pedal snaps hard all the way back releasing the parking brake... If this doesn't work the first try, try it 3-5 times and it shall work... The airbag light will go off...


NOTE: The parking brake pedal is located to the left of the regular brake pedal, near the driver's door.
&

The parking brake lever is located above the parking brake pedal, with the parking brake symbol.

May 28, 2012 | 2006 Hummer H3

1 Answer

PARKING BRAKE RELEASE??


just push the parking brake pedal down when the park brake is on....the pedal is a push on off release

Jul 16, 2011 | 1999 Plymouth Grand Voyager

1 Answer

Diagram for parking brake cables


Removal & Installation
  1. For the 1500HD, relieve the tension from the park brake cable by pulling down on the park brake cable in front of the equalizer then removing the cable from the equalizer bar.
  2. For the 25/35 series Disable the park brake cable automatic adjuster.
  3. Raise and safely support the vehicle.
  4. Remove the tire and the wheel.
  5. Perform the following procedure to remove the cable (2) from the backing plate (4):
    • Compress the spring (3) by pushing toward the lever (1).
    • Depress the locking tabs.
    • Pull the cable housing out of the backing plate (4).
    • Remove the cable (2) through the slot in the backing plate.
      32085_silv_g0069.gif

      Lever (1), cable (2), spring (3) and backing plate (4)

  6. Remove the park brake cable (2) from the lever (1).
  7. Remove the rotor.
  8. Remove the rear axle shaft.
  9. Remove the park brake shoe return spring (6).
    32085_silv_g0070.gif

    Park brake shoe assembly 1500HD, 25 and 35 Series
    Click to Enlarge

  10. Remove the park brake shoe anchor springs and pins.
  11. Separate the tips of the shoes from the park brake actuator and remove the park brake shoes and adjuster assembly from the vehicle.

To install:

  1. Clean the debris and the dust from the park brake components using a clean shop cloth.
  2. Install the adjuster assembly to the park brake shoes.
  3. Separate the tips of the shoes and install the park brake shoes to the park brake actuator.
  4. Install the park brake shoe anchor springs and pins.
  5. Install the park brake shoe return spring (6).
  6. Adjust the park brake shoe.
  7. Install the rear axle shaft.
  8. Install the rotor.
  9. Install the park brake cable (2) to the lever (1).
  10. Perform the following procedure to install the cable (2) to the backing plate (4):
    • Compress the spring (3) by pushing towards the lever (1).
    • Route the cable (2) through the slot in the backing plate.
    • Push the cable housing into the backing plate (4) until the locking tabs snap into place.
  11. Install the tire and wheel.
  12. Remove the safety stands.
  13. Lower the vehicle.
  14. Enable the park brake cable automatic adjuster.
  15. For the 1500HD, install the park brake cable to the equalizer by pulling down on the park brake cable in front of the equalizer then installing the cable to the equalizer bar.
  16. Adjust the park brake cable.
// // 0) preLoad.src = ctl00_cphLeft_chRepairTreeNav_tvTOC_ImageArray[i]; } ctl00_cphLeft_chRepairTreeNav_tvTOC_Data.lastIndex = 23; ctl00_cphLeft_chRepairTreeNav_tvTOC_Data.populateLog = theForm.elements['ctl00_cphLeft_chRepairTreeNav_tvTOC_PopulateLog']; ctl00_cphLeft_chRepairTreeNav_tvTOC_Data.treeViewID = 'ctl00$cphLeft$chRepairTreeNav$tvTOC'; ctl00_cphLeft_chRepairTreeNav_tvTOC_Data.name = 'ctl00_cphLeft_chRepairTreeNav_tvTOC_Data'; //]]> var _strTreeScrollHidName = 'ctl00_hidTreeScrollPos'; shinehutt_0.gif

Jan 13, 2011 | 1995 Ford F150 Styleside Regular Cab

1 Answer

The parking brake in my chrysler pacific is stuck. how do u release it?


Is it a "stick" in the console between the driver and passenger seats, or is it a pedal you push down? If it is in the center console, try starting the car, putting it from park into NEUTRAL with your foot on the brake, and pull up on the stick a little while pushing in the button. If the button goes in, push the handle back down, put the car back into park, and take your foot off the brake. I'm not real familiar with the Pacifica, so a description of the parking brake would help.

Nov 18, 2010 | Chrysler Pacifica Cars & Trucks

1 Answer

When I push the Parking Brake Pedel, it does NOT Latch. 2003 Dodge Grand Caravan. It First ocurred after I went into Reverse to back down my driveway.


does it go all the whey to the floor if so the rear brakes and cables should be checked also make sure the release Handel 4 the parking brake is pushed in

Mar 11, 2010 | Dodge Grand Caravan Cars & Trucks

1 Answer

How to turn off headlights with truck running 99 gmc truck


push parking brake down one small click. this will turn off daytime running lights but brake light will come on on dash. don't push it to the floor just like a half inch. if you never use your parking brake and push it all the way in it might get stuck

Dec 12, 2009 | 1999 GMC Suburban

1 Answer

Brake light is on on my 2003 discovery (land rover) brake fluid leaking from the container


Check your brake fluid level. If it is low, that light will come on. If the fuid level is ok, and the switch is ok, check the p/b switch

parking brake switches are usually normally open and go closed when the brake is engaged, the brake handle going up releases the switch and then presses it back down when you put the brake handle down, 9 out of 10 times the switch gets pushed to the side or broken so when you put the brake handle down it does not push the switch down. this would be the first place I would look.
The parking brake light is also an indication of a problem with the brake system

Jun 22, 2009 | 2003 Land Rover Discovery

1 Answer

My toyota t100 broke down in a parking lot while i was driving. i pushed it into a parking space and put it in park and engaged the parking brake. later on that day i attempted to move my truck but when i...


Either remove the drivers side rear wheel and disconnect linkage or cut the cable from underneath (do this as a last resort... if you want to keep your emergency brake for future use, you'll have to replace the cable.)

Jun 10, 2009 | 1993 Toyota T100

2 Answers

Parking brake won't release


Try pushing down on the parking brake while pulling on the release handle.Downward pressure may make the release handle easier to pull.Good luck,
ChevRev

Mar 21, 2009 | 1988 Chevrolet Astro Cargo

Not finding what you are looking for?
1997 Ford Crown Victoria Logo

Related Topics:

15 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

fordexpert

Level 3 Expert

5520 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...